Used Adhesive for sale (607)

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller Bdedjvu Hgbopfx Akqsd 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, Year of construction: 2025, operating hours: 12 h, power: 36 kW (48.95 HP), Radio-Controlled Tool Carrier with Grass Mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier designed for use in particularly challenging and hard-to-reach terrain, with the capability to operate on slopes up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections to enable compatibility with various attachments. Features: * 150 m radio remote control range * Optimal maneuverability * Ground adhesion in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Excellent traction on all surfaces Special equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color orange RAL 2011 / grey RAL 7021 * Rear radiator guard * Counterweights Comp. 70 kg * 1 LED work light * LED beacon 12 Volt with bayonet fitting Attachment: Energreen Head 155 with hydraulic quick couplers "CEJN" and Y-blades Robust, reliable mulcher made of Strenx® steel, ideal for cutting grass and bushes up to a diameter of 3 cm. Rotor with Y-blades and adjustable cutting height. Technical Specifications: Working width: 1535 mm Oil pressure: 305 bar Number of tools: 30 Oil flow: 55 l/min Hydraulic motor: 21 cm³ Weight: 310 kg We have further grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double-blade mowers, mower arms, and many more are available on request! We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of both used and new machines in stock as well as further units available for demonstration. Feel free to contact us! Bdedpfxey Ep Hzs Akqsd We also offer all equipment for rent, with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible * Sale price excludes transport * No liability for typographical or printing errors * Subject to errors, changes, and prior sale * Offer is non-binding * Photos may differ. Price applies to current condition * All information without guarantee Further information Fuel type: Diesel

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 Bdjdpfx Aey S D Naokqjd • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 12075, WITH BASE CABINET Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Bdsdpfsup A Dnjx Akqod Equipment / Additional information: Adhesive: Planamelt R 1323-2

Condition: used, Year of construction: 2006, color: white, overall weight: 16,000 kg, maximum load weight: 12,410 kg, empty load weight: 3,590 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,800 mm, first registration: 06/2006, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 41050 Krone Swap Body / Container * Year of manufacture: 2006 * 7.45 m length * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Roller shutter door * Textile design * Double coupling mounts * Telescopic landing legs * Rail- and crane-compatible * Other * Gross weight: 16,000 kg * Unladen weight: 3,590 kg * Payload: 12,410 kg * Permissible gross weight: 16,000 kg * Internal dimensions: L = 7,300 mm; W = 2,480 mm; H = 2,800 mm * Internal volume: 51 m³ * Corner fitting dimensions E = 5,853 mm * Overhang dimensions: 799 mm * Drop-off height: 1,120 mm * Pallet spaces: 18 * Krone swap body, 7.45 m * Sidewalls with integrated folding tables * Signage is applied with adhesive film * Interior in good condition Disclaimer: Subject to change, prior sale, and errors excepted. More images and videos available on our website. Our extensive services include, for example: * Purchase / sale / rental of commercial vehicles * Quick and easy financing * Processing of all (export) documents * Ordering export / customs number plates Bdedsyrxmfepfx Akqed * Vehicle preparation: new tarpaulins, graphics, paintwork, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer/transit of commercial vehicles Contact our trained staff for expert advice.

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 747895.1, overall weight: 174 kg, For robot use. Pressing force: 55 kN Bsdovb Icdepfx Akqodd Total stroke: 98 mm Power stroke: 7 mm The Tox Pressotechnik TZ 05.747895 is a hydropneumatic clinching pliers developed for precise and reliable joints in sheet metal processing. With its innovative technology, it enables the efficient joining of metal parts without additional materials such as welding rod or adhesives. The pliers offer high force transmission and ensure consistent results, even with complex geometries. Thanks to its ergonomic design and user-friendly handling, it is ideal for use in series production as well as in single-part production. The robust design ensures durability and ease of maintenance, while the compact size allows flexible integration into existing production lines.

Condition: excellent (used), Year of construction: 2002, Speed: 14,000 sheets per hour Format (cm): max.: 48 x 32 The line consists of: - 4 x Inserter stations - 2 x Card inserter stations with adhesive unit (can also be used as standard inserter stations – top loading) - 1 x Cover feeder - 1 x Duplex sheet inspection unit Bdodpfx Akjxmhrfoqed - 1 x Stapling unit with (Hohner SB 50 heads) 2+2 - 1 x Three-knife trimmer with center cut - 1 x Cross stacker RIMA

Condition: used, Year of construction: 2016, Perfect Binder Rigo Lamibind 340 HM, Used Bdjdpfxsvax Aro Akqsd The Rigo Lamibind 340 HM is a compact and efficient perfect binder for small to medium print runs. This used machine offers a range of features for professional bookbinding. Key Features: - Equipped with a milling cutter for precise spine processing - Active side gluing for reliable binding - Integrated cover station for easy attachment of book covers - Easy operation via touchscreen - Suitable for digital print and offset papers - Hotmelt (EVA) adhesive system - Manual cover application - Manual book removal - Performance: Suitable for small to medium print runs Technical Details: - Maximum block length: 340 mm - Maximum block thickness: 40 mm - Milling cutter: Fixed disc HM, 0.5 mm All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: Fastbind Casematic H32 PRO Covermaker / Casemaker including accessories (laminator, block press) The FASTBIND Casmatic H32Pro is a professional cover maker / case maker with a folding unit for the on-demand production of individual book covers for hardcover bindings and photo books up to 330 x 330 mm. • For the production of individually printed hardcover book covers. • The desired motif simply needs to be printed on self-adhesive material or material that is subsequently self-adhesive on the back. Bdedpfx Aeu Srxbokqed • Of course, all known book cover materials can also be used if they are self-adhesive or have a self-adhesive finish or glue • With the help of the Hardcover Maker, the gray cardboard is inserted and covered precisely. • Thanks to numerous tools, the Casematic makes this possible semi-automatically in just a few steps • The work table is equipped with a vacuum fixation which, in addition to the light table with measuring scale, ensures exact positioning of the printed sheet • Using the optional cutting device, the printed sheet is trimmed precisely at the corners after the gray cardboard has been applied • With the folding unit, the edges are then folded around the gray cardboard without any creases, so that a cleanly manufactured hardcover in bookbinding quality is created • optional: corner cutter • optional: side stop • Max. paper size: W740 x H370 mm • max. book format: 330 x 330 x 40 mm (W x H x RB) • Max. fold length: 700 mm • Connection: 240 V / 50 Hz • Dimensions: W830 x D470 x H200 mm • Weight: 23kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Bsdszbfuhjpfx Akqedd Excerpt from the equipment. Complete equipment available upon request. Gooseneck: * MAX810-H neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm * Truck hydraulic connection with flow control (20 l/min), * incl. gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 l with MAX trailer couplings; otherwise, the customer must supply the couplings. * For SZM: 6 x 4 or 8 x 4 Loading platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle telescopic loading platform with bolt-tab coupling at the front and a slope of approx. 500 mm x 8° at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. PENDULUM AXLE 2-AXLE FRONT AXLE * All axles hydro-mechanically steered. * MAX810 chassis-PA-X-F-2-17.5-1.50-2.75 bolt-tab coupling at the front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2 * Extendable widening elements by approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM * All axles hydro-mechanically steered. * Hose burst valve on the axle balancing cylinder with automatic RESET function. * Hydraulic cylinder with shut-off valves and quick-release coupling to secure in the raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle balancing. TIRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141. Final coating of the axles * with 2 coats of 2-component paint, solid color in DB7350 Novagrau. * PAINTING Complete steel construction is automatically blasted with a shot-blasting system after welding. * Second blasting process with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * PAINTING Semi-trailer in carmine red (RAL 3002) Including the following accessories * Gantry with winch for spare tire on the front of the gooseneck. * 3.5-inch Kingpin * Steel front panel approx. 400 mm high. * Aluminum side and rear panels that can be attached to the gooseneck, approx. 400 mm high, in anodized design. * Control levers on the gooseneck protected by a folding cover. * Lighting for the controls on the gooseneck with on/off switch. * A 7-pole socket on the left and right rear of the gooseneck for the warning panel. * Load gauge on the gooseneck for axle load determination on the front and rear chassis. * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the lowbed with screw couplings. * Access to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 HP) at 3000 rpm Emission level: EU Stage V Max. Hydraulic pressure: 280 bar Max. Flow rate: 21 l/min Mounted on the gooseneck. * Hydraulic oil tank 100 L Frame hot-dip galvanized (± 480 kg) * Hydraulic connecting lines between the power pack and the connector plate on the gooseneck. * Radio remote control: * Operation of the power pack, start/s

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Kolbus SW.E 500 is a high-performance corner-cutting machine for the industrial processing of high-quality cardboard packaging. It was specifically designed for the automated production of luxury packaging and rigid boxes. Bedpfx Aozblxmokqodd The Kolbus SW.H 500 is a high-performance box-making line from the German manufacturer Kolbus Group GmbH. The machine processes pre-scored and corner-cut cardboard sheets. The Kolbus SW.H 500 applies adhesive to the pre-formed creases, erects the side walls, and precisely fixes them to create a stable, foldable rigid cardboard box.

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Bedoxqmqzjpfx Akqedd

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation • Removal of adhesives and resins Bsdpfx Ajy R Ergskqsdd • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar Bsdpfeum Hufox Akqjdd * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) Bedpfxewqx H Re Akqjdd • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: Bjdpeyc Nzuofx Akqsdd • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks Bjdpfx Aow Tpr Iokqsdd * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Bdodpfx Aksxzufhjqod Cutting units Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment

Year of construction: 2016, condition: used, KK PULLTESTER KKP03A / series 6 The KK pulltester is a measuring device for quality assurance in the graphic industry. It measures, with extremely high precision the bonding-adhesion of individual pages of cataloges, paperback books, journals, brochures and books. The number of pages to be measured, page numbers, order number and book block length are programmed before the measurements are taken. Technical specifications: Language: english Bdedpfjwcd Iqox Akqod book block format width: approx. 5 - 35 cm book block format length: approx. 7 - 40 cm book block format thickness: approx. 7 cm

Condition: used, mileage: 35,200 km, power: 63 kW (85.66 HP), first registration: 07/2001, fuel type: diesel, number of seats: 6, gearing type: mechanical, axle configuration: 4x2, overall weight: 3,500 kg, color: blue, suspension: steel, wheelbase: 3,300 mm, driver cabin: other, Equipment: ABS, traction control, trailer coupling, Vehicle location: Bovenden, double bench seat, switch 5, ABS (anti-lock braking system), traction control system (ASR), leaf suspension, right side door Wheelbase: 3300 mm Body: Passenger transport vehicle Engine damage, exhaust gas turbocharger defective, clutch worn, water ingress in the interior, headliner partially fallen off, removal traces radio, special signal system and special installations, paint damage and adhesive residue due to film removal, batteries deeply discharged, signs of use, damage due to standing and corrosion with partial rust through, age and use-related wear, The vehicle is not ready to drive and must be loaded and collected by yourself! The sale to tradesmen or export is subject to 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bedpfx Aevhiwcokqodd - .

Condition: used, mileage: 366,920 km, power: 251 kW (341.26 HP), first registration: 03/2020, fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro6, color: beige, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Our internal vehicle number: 1187 Solaris New Urbino IV 12 Power: 251 kW Emission class: Euro 6D Vehicle class: M3 First registration: 03/2020 * 1st owner in Germany, with inspection book * Voith automatic transmission 1/2/3/D/N/R * 28 + 1 seats * LAWO destination display (front/side/rear) with control unit * Electric sunblind * Air conditioning * Reversing camera * Door leaf locking system * Folding ramp * Large multi-purpose area – wheelchair / stroller * Convector heater * 2 folding windows installed on each side * Original mileage * Vehicle was branded – with adhesive film * Pre-wiring for TFT screen * NEW PAINT in RAL 9016 traffic white, applied in 05/2026 Bsdpfey E D Nmsx Akqjdd Note: Vehicle may be registered – mileage and condition may vary. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information is provided without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 Bdjdpsxbmplofx Akqjd * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Bdsdpfx Aey Dr Hdskqjd Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Manufacturer / Model: Siat L36 150 TC CE Year of manufacture: 2014 Condition: used, good Function: functional Application: printing adhesive tape Bdsdpfx Aeza Synokqsd CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request.

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Bjdey D Hfzepfx Akqjdd Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.