Used Adhesive for sale (688)

Condition: used, Year of construction: 2011, Continuous labelling machine for self-adhesive belly labels. Can be used for various bucket sizes with a capacity of 1 – 5 kg. Additional title: Continuous labelling system Capacity: 18 containers/min. Length: 3500 mm Formats: 1 - 5 kg buckets Running direction: right-hand machine Operation / Control: Simatic Panel Position: free standing Godpew Tlnfofx Abiebw Base construction: Continuous machine with enclosure Features: All-round protective cover, conveyor belt with drive, upper belt, central adjustment, single-cycle stopper, adhesive labeller with vacuum station, console cabinet, 2nd coating station, three-roller aligner

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  Gjdj Ah Simspfx Abisbw 1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge bander (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Gbjdpfx Ajz I R Snebiow Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Adhesive technology used: EVA hot melt adhesive in granular form (GlueJet, interchangeable station), L-Tronic laser (interchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), edge rounding unit (2 motors, CNC-controlled), sanding units (profile and flat), infeed system (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edging thickness: 15 mm Maximum edging thickness in roll form: 3 mm Maximum edging height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece infeed height: 877 mm Machine weight: 4200 kg Electrical minimum connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electric height adjustment: YES Top conveyor belt pressure unit: YES Maximum feed rate: 25 m/min Infinitely adjustable feed rate: YES Preheating zone: YES Spray nozzles: YES Machine documentation: YES Operating hours: 8,788 h Total number of edged panel sides: 1,138,998 pieces Total length of edged material: 966,123 m Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, Year of construction: 1997, Manufacturer: Bausch + Ströbel Bausch + Ströbel Model: ESA 1025 Type : Self-adhesive labeller for cartridges, ampoules and vials Year : 1997 Machine number 50414   Container Ø 8 mm to 25 mm Container height from 20 mm to 140 mm Gbjdpfx Aex R Dg Nebijw Label length from 26 mm to 85 mm Label height from 13 mm to 45 mm Maximum capacity: 25,000 labelled cartridges per hour Current format: Diameter 8.8 mm x Height 68 mm Cartridge Spare parts included Mechanical overhaul in 2020 Printer and camera control NOT included User manual in French Floor area (L x W x H) 150 x 220 x 190 cm Weight: 850 kg

Condition: used, Year of construction: 2007, Overview This pallet labeler was manufactured in 2007 by the German company Logopak.  Manufacturer: Logopak Gedpfx Aexbf Nqobiobw Model: 920 PF Self-adhesive label for pallets. Label size: A5

Condition: used, Year of construction: 2002, Overview This ENOS Base automatic self-adhesive labelling machine was manufactured in 2002 and is designed for the application of front and back labels on various bottle shapes. The machine uses pressure-sensitive (self-adhesive) labelling technology, which allows flexible processing without the need for mechanical format parts. The system can handle round, cylindrical, and square bottles within a volume range of 0.2 L to 1.0 L, making it suitable for a wide variety of beverage, spirits, or specialty product applications. With a production capacity of approximately 1,000 bottles per hour (0.7 L format), the machine is well suited for small to medium production environments. Gsdpfxeyuulpe Abisbw Technical Data Manufacturer: ENOS Model: Base Machine type: Automatic self-adhesive labelling machine Year of manufacture: 2002 Labelling technology: Pressure-sensitive (self-adhesive) Label positions: - Front label - Back label Capacity: approx. 1,000 bottles per hour (at 0.7 L) Bottle formats: - 0.2 L – 1.0 L Bottle shapes: - Round - Cylindrical - Square Format parts: Not required Condition: Used, dismanteled 

Condition: used, Year of construction: 2002, Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data - Capacity: approx. 2,500 bottles per hour - Labelling technology: Pressure-sensitive (self-adhesive) - Number of stations: 3 - Applications - Front label Godpfx Aeyxxxcsbisbw - Back label - Seal label - Bottle Formats - Container type: Glass bottles Supported formats: - Bordeaux - Burgundy - Format parts: Included for both bottle types

Condition: excellent (used), Year of construction: 2020, Ref: 11170 . 2020 Grafmasz GC-480 PRO Semi-Automatic Case Maker Integrated gluing and case-making machine for producing hard book covers, photo albums, folders and presentation cases. Features: Vacuum-assisted positioning LED spine illumination and powered turning-in and pressing rollers Specification: Maximum open cover size: 480 × 770 mm with 20 mm turn-ins Minimum open cover size: 145 × 145 mm Maximum gluing width: 520 mm Board thickness: 2–4 mm Spine width: 1–100 mm Turn-in allowance: 10–20 mm Gbsdps Ah D Riefx Abiow Gluing speed: Variable, 5.6–16 m/min Output: Approximately 120–180 covers/hour, depending on materials and operator Covering material: 80–300 gsm for gluing; 80–250 gsm for turning-in Adhesives: Cold water-based or hot animal glue Glue tank capacity: 4 litres Glue temperature: Up to 90°C Power supply: 400 V, three-phase, 50 Hz Power consumption: 3.8 kW heated / 0.8 kW unheated Compressed air: Not required Dimensions: Approximately 1,600 × 1,600 × 1,120 mm Weight: Approximately 500 kg

Condition: good (used), machine/vehicle number: 087222, Horizon Perfect Binder BQ-260, 1 station, hotmelt glue, envelope feeder, machine number 087222, in good condition, immediately available. If interested, we are happy to provide information on further machines available at our facility. Gbjdpfx Asxdh Etjbisw You are welcome to view the machine at our premises by appointment.

Condition: used, Year of construction: 2006, for adhesive tape below. Optional on top - fully automatic sealing, Gluing drive: -drive motor for feed belts -pneumatic arm to close the lid Gbjdj Ai H Hcepfx Abiew

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Gbjdpfezr H Aajx Abijw Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: used, Year of construction: 2014, machine/vehicle number: 1404902, Self adhesive labeler 2 stations farmat 46mm diam Technical data: working direction: left-right, rotative, counter clockwise capacity bph max.: 6000 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 9 bottle diamater max (mm): 125 bottle diamater min (mm): 40 bottle height max (mm): 330 bottle height min (mm): 60 speed adjusment: frequence converter Godpfx Ae Ai Up Hjbiebw

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 340-0 / 511, functionality: fully functional, Machine available from November 2026 Sold on behalf of a customer Workpiece length min. 180 mm Workpiece width min. 60 mm Godpfjz Hpi Ajx Abiobw Edge thickness (coil stock) 0.4 - 3 mm Edge thickness (strip stock) max. 15 mm - Multi-edge magazine (Ostermann) - 1888 Control panel - Motor-adjustable infeed guide, PLC controlled - 1961 Pre-milling unit - 1901 Edge magazine, fully automatic - 1905 Glue station for granules & cartridge with storage hopper Processing of EVA & PUR adhesives - 1913 Pressing unit with pneumatic, adjustable pressure. Adjustment based on edge thickness, motor-driven, PLC controlled - 1918 Trimming unit 2, motor-driven, pneumatic adjustment 0 - 12° - 1823 Flush trimming unit, up to 15 mm - 1942 Multi-milling unit, flush, chamfer, radius, pneumatic - motor-driven, PLC controlled - 1983 Corner rounding unit - 1929 Radius scraping unit - 1964 Surface scraping unit - 1940 Buffing unit - 1856 Spraying system, front for release agent, rear for cleaning agent - Extendable support - Dimensions L/W/H 5920 / 1250 / 2170 - Weight approx. 1825 kg

Year of construction: 2023, condition: ready for operation (used), number of axes: 2, Automation equipment manufactured in 2023. This ALARSIS PLT 220D features a maximum sheet length of 220 mm and a maximum sheet width of 160 mm. It includes a two-axis movement system and a double working table with independent automatic height adjustment. If you are looking to get high-quality gluing capabilities, consider the ALARSIS PLT 220D machine we have for sale. Contact us for further details. • Axis movement: Two-axis movement system • Drive system: Belt-driven transmission Gbsdpfx Aj Ai Swtebisw • Maximum sheet length: 220 mm • Maximum sheet width: 160 mm • Working table: Double table • Table height adjustment: Independent automatic height adjustment • Gluing system: Adhesive injection heads • Gluing head adjustment: Manual • Processed materials: Cardboard and carton board • Consumables: Adhesive • Main components: Working table, gluing heads, gluing unit • Operating status: In production

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, ABB Robotics IRB 2400 robot – IRB2400/16 Type B Standard / M2004 – IRC5 controller (Serial No. 24-51914) Manufactured on 03.11.2006 Key technical data of the IRB 2400 family The exact performance values depend on the specific sub-variant (e.g., Standard, /10, /16 or /L): • Payload: Typically 10 kg to 20 kg (standard variants often with 16 kg; the long-arm variant IRB 2400L carries a maximum of 7 kg). Reach: Depending on the model, from 1,550 mm to 1,800 mm for the long-arm model. Degrees of freedom: 6 axes for maximum flexibility. Gedpfx Abe Ahwploiobw • Weight: Approx. 380 kg (manipulator only, without controller). • Mounting: Extremely flexible – can be mounted on the floor, on the wall, or fully suspended from the ceiling. Typical applications Thanks to its high path accuracy and robust design, this articulated-arm robot is primarily used in the following areas: • Arc welding: One of the main application areas for this type. • Material handling & machine loading: Fast handling of components. • Process applications: Cutting, deburring, grinding, polishing, and the application of adhesives or sealants. Compatible controllers Depending on the year of manufacture and generation, the IRB 2400 is operated with different ABB controllers: • Older models: S4, S4C or S4Cplus controllers. • Modern / Current models: Usually supplied with the IRC5 controller (M2004) or the newer OmniCore systems.

Year of construction: 2020, operating hours: 2 h, condition: good (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Gjdszhifiepfx Abiobw Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: used, Year of construction: 2022, machine/vehicle number: AH00003901, functionality: fully functional, input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 60 mm, height adjustment type: electric, actuation type: electric, overall weight: 2,650 kg, Equipment: CE marking, documentation/manual, used SCM Stefani KD edgebander in HP configuration, year 2022. The machine is in excellent condition and can be seen running. Units: Godpe Aifpwjfx Abiobw RT/E pre-milling unit with diamond cutters (H 64 mm) VC800 gluing unit with pre-heating for EVA glue Automatic edge feed from coil and strips K/SEL end trimming unit, tilting 0–15° R-HP Multiedge tilting trimming unit for 2 radii (4-axis positioning) Round K corner rounding unit R-HP Multiedge radius scraper for 2 radii and RAS/V scraper RCA/2C flat scraper Buffing brushes Additional equipment: Startouch 12" control, ready for a barcode reader Top pressure belt instead of wheels, which protects matt and gloss panels Easy Size (automatic infeed fence positioning) Spray units for anti-adhesive, cleaning and gliding agents Infrared ceramic lamp 1700 mm extendable support for workpieces up to 2200 mm wide Copying wheel kit for nesting panels CE Technical data: Feed speed: 10–20 m/min Panel thickness: 8–60 mm Coil edges: up to 3 × 45 mm Solid wood edges: up to 8 mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 846 mm, power: 1.5 kW (2.04 HP), total length: 515 mm, total width: 517 mm, type of input current: AC, input voltage: 230 V, overall weight: 80 kg, space requirement height: 1,276 mm, rotational speed (max.): 10,000 rpm, Equipment: type plate available, We are selling two laboratory dissolvers, Dispermill Discovery 200 (manufactured in 2024), in very good condition, with minimal use. The units can be purchased individually or together. Gbodo Aidztepfx Abiow Price: €11,500 net per unit including accessories – both units together for €23,000 net including additional vacuum setup. Technical specifications per unit: - Motor power 1.5 kW / 2 HP - Connection 230 V, 50/60 Hz (according to nameplate) - Speed 0–10,000 rpm, torque 2.7 Nm - Working volume 500 ml – 25 l - Container diameter 80–305 mm, container height 85–430 mm - Dimensions (W x D x H): 515 x 517 x 846 mm (lowered) / 1,276 mm (raised) - Weight 80 kg - Electronic height adjustment, stainless steel housing (chemically resistant, easy to clean) - 5" TFT color touchscreen (solvent-resistant hardened glass) with LED rotary knob - Display of power (kW), circumferential speed, and temperature - Programmable temperature alarm - Timer with automatic stop, adjustable from 1 min to 20 h - Thermal motor protection via PTC temperature sensor, quiet fan - Interchangeable dispersing discs - CE compliant (Machinery Directive 2006/42/EC) Accessories per unit: - Long 5-liter vacuum kit (vacuum gauge, vacuum valve, lid with 2 sight glasses and filling opening) - 5-liter stainless steel container for vacuum operation - 1-liter and 2-liter stainless steel containers - PT100 temperature sensor - Dispersing discs 20 / 30 / 40 / 90 mm - Adapter 5/16" to 6 mm M5 - Vacuum seal Included with the purchase of both units: - Chemical-resistant diaphragm vacuum pump (20 l/min, ultimate vacuum 8 mbar) - Welch VCPRO601 vacuum controller (1–1,100 mbar) with chemical-resistant sensor and integrated control valve Application areas: Research & Development, formulation, dispersing and mixing of resins, adhesives, coatings, paints, and pigment pastes. Note: The photos were taken in our yellow light laboratory, hence the yellow tint. Inspection and functional test in Gerasdorf near Vienna (Austria) by appointment. Test report with functional video available upon request. Collection by the buyer; transport can be arranged for an additional charge. B2B sale with exclusion of warranty, invoice with VAT shown.

Condition: used, Year of construction: 2020, type of input current: AC, input current: 12 A, Equipment: documentation/manual, We offer this used Mimaki CJV300-160Plus digital printing machine, manufactured in 2020. Manufacturer: Mimaki Model: CJV300-160Plus Machine type: Digital printing machine Year of manufacture: 2020 Serial number: CD0CE 069 Input voltage: 100–120 / 220–240 V~ Input current: 12 / 8 A Mains frequency: 50/60 Hz Weight: 178 kg Short-circuit strength: 0.1 kA The CJV300-160 Plus is a 1.6-m print & cut eco-solvent printer. The maximum print/cut width is approximately 1,610 mm, and the maximum speed of the CJV300-160 Plus is up to 105.9 m²/h. Mimaki markets this device as a solvent/sublimation machine with print & cut functionality. The Plus version supports, among other things, ID-Cut/barcode workflow, Ethernet connectivity, Mimaki MAPS4, and RasterLink workflow. Typical applications Application | Suitable? Adhesives / Stickers | Yes Vehicle wrapping | Yes Window films | Yes Banners / Tarpaulins | Yes Posters | Yes Roll-ups | Yes Contour cutting of printed film | Yes Textile / Sublimation | Depending on the ink set / configuration Gsdpfx Abo Aiblrsisbw UV printing on panels | No, for this, an Arizona / JFX / UV flatbed printer would be required. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, ABB Robotics Robot IRB 2400 - IRB2400/16 Standard M2004 IRC5 Controller 24-50937 Manufactured February 24, 2006 Key technical data of the IRB 2400 family The exact performance values depend on the specific sub-model (e.g., Standard, /10, /16, or /L): • Payload: Typically 10 kg to 20 kg (standard versions often with 16 kg; the long-arm version IRB 2400L carries a maximum of 7 kg). Reach: Depending on the model, 1,550 mm up to 1,800 mm in the long-arm model. Degrees of freedom: 6 axes for maximum flexibility. • Weight: Approximately 380 kg (manipulator only, without controller). • Mounting: Extremely flexible – can be mounted on the floor, on the wall, or completely suspended from the ceiling. Gbjdpfx Abj Ahwlzoiow Typical applications Thanks to its high path accuracy and robust design, this articulated-arm robot is mainly used in the following areas: • Arc welding: One of the main applications for this type. • Material handling & machine loading: Fast handling of components. • Process applications: Cutting, deburring, grinding, polishing, and applying adhesives or sealants. Compatible controllers Depending on the year of manufacture and generation, the IRB 2400 is operated with different ABB controllers: • Older models: S4, S4C, or S4Cplus controllers. • Modern / current models: Usually equipped with the IRC5 controller (M2004) or the newer OmniCore systems.

Condition: good (used), Adhesive, universal adhesive, bodywork adhesive -Manufacturer: Sika, 2-component epoxy adhesive type SikaPower -4720 2K 12 cartridges -Item No.: 739474 -Expiry date: 09/24 -Color: black -Carton: Contents 12 x 220 ml -Quantity: 18 boxes available -Price/Distribution: per carton Gbodpst Ult Nofx Abisw -Cardboard dimensions: 310/170/H270 mm -Weight: 4.9 kg/carton

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included Godpfx Absyr Aiweisbw 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: used, Year of construction: 2005, functionality: fully functional, ABB Robotics IRB 2400 robot - IRB2400/16 Type B Standard / M2000 - S4Cplus controller (Serial No. 24-29753) Manufactured on 08.12.2005 Key technical data of the IRB 2400 family The exact performance values depend on the specific sub-variant (e.g., Standard, /10, /16, or /L): • Payload: Typically 10 kg to 20 kg (standard variants often with 16 kg; the long-arm variant IRB 2400L has a maximum payload of 7 kg). Reach: Depending on the design, from 1,550 mm to 1,800 mm for the long-arm model. Degrees of freedom: 6 axes for maximum flexibility. • Self-weight: Approx. 380 kg (pure manipulator without controller). • Mounting: Extremely flexible – can be placed on the floor, mounted on the wall, or completely suspended from the ceiling. Typical application areas Thanks to its high path accuracy and robust design, this articulated-arm robot is primarily used in the following areas: • Arc welding: One of the main application areas for this type. • Material handling & machine loading: Fast handling of components. • Process applications: Cutting, deburring, grinding, polishing, and applying adhesives or sealants. Compatible controllers Depending on the year of manufacture and generation, the IRB 2400 is operated with different ABB controllers: • Older models: S4, S4C, or S4Cplus controllers. Godpfxj Ahpyrj Abisbw • Modern/current models: Usually equipped with the IRC5 controller (M2004) or the newer OmniCore systems.

Condition: good (used), Year of construction: 2012, 2 x Carton closing machine / carton sealer with wet adhesive strips, Bedo, VA 3821 – used: Price ex-works: Year of manufacture: 2006: €5,500 (net), incl. loading! Year of manufacture: 2012: €8,500 (net), incl. loading! Manufacturer: Bedo Type: VA 3821 (No.: 3821.2.7062) Year of manufacture: 2012 3/N/PE AC400/230V 50Hz Control voltage: 24 VDC Current: 16 A Compressed air: 5-7 bar Type: VA 3821 (No.: 3821.1.6093) Year of manufacture: 2006 400/3PN/50Hz, 14.8A, control voltage: 24V, Compressed air: 5-7 bar Carton infeed height: approx. 800 mm Gsdpfxs Agpdgo Abijbw Infeed speed: approx. 0.4 m/s Carton design: FEFCO code 0201 Processing range: L 200–600 mm, W 150–500 mm, H 80–480 mm Carton sizes: e.g. 300 × 200 × 100 mm to 600 × 400 × 275 mm Carton content: 0.2–32.5 kg Capacity: approx. 25 cartons/minute Carton sealing: longitudinal, top and bottom with wet adhesive strips Adhesive strip tear control and warning “Adhesive strip roll end” Control “Water supply disrupted” Condition: good, regularly maintained, in operation until early 2026 Available: immediately Location: Leipzig area

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020012.010, total height: 870 mm, total width: 750 mm, total length: 1,400 mm, Equipment: documentation/manual, COMMERCIAL SALE As part of the liquidation of a company, we are selling the following used packaging machines. All machines offered are fully functional and were used in ongoing operations until recently. If you have any questions about the individual machines, possible combinations, or further details, please do not hesitate to contact us. Delivery and collection are possible by arrangement. Location: 41564 Kaarst-Holzbüttgen 1. & 2. Simons+Harren carton sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1x manufactured in 2020 - 1x manufactured in 2018 Technical data (both machines): - Operation: manual / pneumatic, 230 V - Sealing: Tesa adhesive tape - Dimensions: L 1,160 x W 970 x H 750 mm - Carton sizes approx.: L 150–∞ x W 120–470 x H 120–450 mm Price, manufactured in 2020: 3,000 EUR net Price, manufactured in 2018: 2,500 EUR net 3. Youngsunpack carton sealer MHFJ1AB (2013) Semi-automatic, 230 V, Tesa adhesive tape Dimensions: L 1,100 x W 770 x H 700 mm Carton sizes approx.: L 150–∞ x W 120–480 x H 120–480 mm Price: 1,000 EUR net 4. Heripack HV-TX52.B (2018) Semi-automatic carton sealer / bottom closing machine 230 V, Tesa adhesive tape, automatic format adjustment Dimensions: L 1,400 x W 750 x H 870 mm Price: 2,700 EUR net 5. Simons+Harren bottom flap folding machine CF-10T (2017) Pneumatic side gusset folding machine Dimensions: L 1,400 x W 750 x H 870 mm Carton sizes: L 200–600 x W 150–480 x H 120–500 mm Price: 1,700 EUR net Gbedpfxez S Hwvj Abiew 6. Heripack bottom flap folding machine HB-Sonder (2020) Pneumatic/electric, side gusset folding machine Optimized for combination with item 4 (HV-TX52.B) Dimensions: L 1,650 x W 740 x H 750 mm Carton sizes approx.: L 150–800 x W 110–400 x H from 90 mm Price: 2,500 EUR net (Particularly attractive as a set with HV-TX52.B) All machines are available individually.