Used Adhesive for sale (616)

Condition: used, tank capacity: 1,100 l, GENERAL INFORMATION Design: Suspension-mounted Comments: Former support brackets were removed during dismantling and are no longer present; 1 heating connection was cut off; vessel has significant residue build-up Speed: 274 rpm Outer diameter: 1,090 mm Tedoxqbi Eepfx Ahuef Inner diameter: 1,040 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,200 mm Heating/Cooling: available Power: 2.2 kW Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Inclined-blade agitator Location: Bremen Cylinder temperature control: Double jacket Volume: 1,100 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,200 mm Previous use: Adhesive production HEATING/COOLING JACKET Bottom temperature control: Double jacket EQUIPMENT Manhole / Dome: in the top (DN 400) Outlet: Flange DN40 Note: Manhole cover clad AGITATOR Agitator manufacturer: Stelzer Voltage: 230/400 V Agitator arrangement: eccentric in top head Agitator details: Agitator impeller partially bent (see photos)

Condition: used, Year of construction: 2005, functionality: limited functionality, machine/vehicle number: IMW 330, For Sale: Mariani IMW 330 Cartoning Machine (2005) High-quality Mariani IMW 330 fully automatic cartoning machine, originally supplied for Elopak UK / Princes Soft Drinks Manchester. Suitable for multipack trays (2×3 or 2×6 configuration), this unit forms, loads, and seals cartons using hotmelt adhesive. Complete servo-driven system with Siemens S7 PLC, ESA VT170 HMI, and Nordson ProBlue glue interface. Technical data: • Model: Mariani IMW 330 • Year of manufacture: 2005 • Power supply: 3×415 V, 50 Hz + N + PE • Installed power: 14 kW • Air consumption: 60 Nm³/h • Noise emission: < 85 dB(A) • Control system: Siemens S7-300 PLC + ESA VT170 touchscreen • Gluing system: Hotmelt (Nordson ProBlue compatible) • Pack configuration: 2×3 or 2×6 • Output: approx. 30–60 cartons per minute (depending on pack format) • Central automatic lubrication • Carton size changeover via HMI recipes • Documentation: Operator, technical, and spare parts manuals (original Mariani) Key features: • Automatic carton forming, loading, and sealing • Servo-controlled diverter and multi-lane infeed • Adjustable hotmelt application (top/bottom/lid) • Quick format changeover with HMI recipe selection Tjdpfx Asxtp Axshuof • Central lubrication and safety interlocks • Fault diagnostics and production counter Condition and delivery: • Complete with electrical cabinet and control system • In excellent working condition, ready for operation • Original documentation included • Custom modifications possible on request (format changes, adhesive unit, guarding or integration into production line) • Location: Netherlands • Price: On request

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below Tedsvu Hgbspfx Ahuof 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Year of construction: 2004, condition: used, - Intermittent operation - Material width 45 – 250mm - Punching width 10 – 230mm - Feed length 10 – 600mm - Unwinding, matrix rewinding, and winding D = 500mm - Inlay width 15 – 240mm - Inlay length 15 – 125mm - Speed 2,000 – 4,000 pcs/h - Register control and fixed feed possible - Flatbed die cutter - Manual regulation for longitudinal slitting - Separating and dispensing of non-adhesive RFID material - All material unwinding units with web tension control - 2 inline RFID readers (inspection/rejection of defective inlays) - Die cutting for cross cutting or carrier cross perforation - Accessories included (excluding die-cutting tools) Todpfx Aow Em Ewehuof

Condition: good (used), Year of construction: 2008, Professional packaging machine from a renowned European manufacturer: -Suitable for adhesive tape width up to 50 mm. -Maximum carton dimensions according to manufacturer's specifications approx.: width 500 mm x height 500 mm; unlimited length. Double-sided sealing of the packages at the top and bottom. -Different carton formats are adjusted in height and width using cranks. -Transport speed approx. 20 m / min. Output approx. 800 cartons per hour. Tsdpfotndq Ijx Ahuof -Working height of the machine is infinitely adjustable. The machine can be moved and locked using foot rollers. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams.

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  Capacity: Up to 2,000 bph (operated between 500–1,000 bph) Filling System: Isobaric, counter-pressure Filling Valves: 5 Bottle Formats: 0.33 L and 0.75 L (adjustable) Can Formats: Standard 0.33 L Closure Systems: Integrated can seamer and crown capper Construction: Stainless steel Working Pressure: up to 3 bar CO₂ System: Pre-evacuation for cans, vacuum for bottles Controls: Touchscreen with adjustable parameters Mobility: On wheels with adjustable legs Condition: In use, regularly maintained Scope of Delivery  Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking   Tsdpfx Ahoxn Uf Iousf

Condition: used, tank capacity: 3,685 l, GENERAL Design: suspended Remarks: 4 mounting lugs made of Fe; 1 vessel with insulation (insulation jacket Fe, painted; external diameter approx. 1,780 mm) Speed: 347 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,650 mm Heating/cooling: available Power: 1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Propeller type Support type: Lugs Location: Bremen Technical documentation: Drawing, TÜV papers Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,685 liters Double jacket volume: 65.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: Chemical industry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Base temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: on top cover (DN 500) Outlet: Flange DN80 Remark: light adhesions, metallic discolorations inside MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR Agitator manufacturer: Stelzer Voltage: 500 Volt Agitator mounting: eccentric in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Tjdpfsxqa Tpjx Ahuef Top wall thickness: 7 mm

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Todpfx Aetxcyiehuef Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal We can send you a video link to this system on request.

Condition: used, This listing is for the Sartorius YDP30 Thermo Direct Printer The unit is in full working condition and is ready for immediate use Overview & Compatibility Tjdpfjxhfy Nsx Ahujf Designed to work seamlessly with Sartorius laboratory balances (Practum®, Quintix®, Secura®, MA37, MA160) — it auto-detects the printer and guides users through GLP-compliant print protocols for traceability and accuracy Supports both direct thermal printing (where the paper darkens directly) and thermal transfer printing (which uses a ribbon for more durable, fade-resistant printouts) Certified Scale Print Capabilities Resolution: 203 dpi for clear text and barcodes Scales Galore Max print width: 54 mm (2.13") — fits both standard A4-style lab reports and narrow self-adhesive labels Label options: On-demand printing of standard paper, continuous rolls, or adhesive labels using compatible ribbons

Year of construction: 2024, condition: ready for operation (used), A nearly unused complete factory for the production of battery housing frames is available. It features the following processes: handling, welding, riveting, Rivtac, screwing, gluing, sealing, measuring and testing. 1) Handling & logistic: component handling, feeding, transfer, positioning, discharge. 2) Riveting & Rivtac: stand riveting, Rivtac joining, fastener inspection. 3) Screw processes: pick & place double screwdriver, simultaneous triple screwdriver, final assembly screwing. 4) Arc welding: large block welding process, welding stations, fourfold clamping concept, rotation devices and trunnion fixations, automatic discharge for NOK. 5) Adhesive & sealer application: brushing & dry cleaning, adhesive application, sealer application, camera inspection and discharge for NOK. 6) Adhesive cleaning & surface preparation: dry tape cleaning and manual tape change. 7) Stud welding, positions: 7. 8) Measuring and testing procedures: geometry measurement before milling with NOK scrap, final measurement, seam inspection, leak test, final inspection, cap installation, leak station, laser marking with NOK scrap procedure. 9) Rework area: robot-supported leak test with sniffing method and 2x manual rework stations. The factory was hardly used and only approximately 1000 components were produced with it. Documentation available. An on-site inspection is possible. Tjdpfx Ahjxwn Izeuef

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Tjdpfxew Nadte Ahusf Location: 65439 Flörsheim

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket Tedpfx Ahoxttc Aeuof * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: used, tank capacity: 1,345 l, GENERAL Design: suspended Remarks: 2 support feet made of V2A (support surface reversed; see photos); 1 vessel is equipped with insulation (see photos); some flanges made of Fe Speed: 313 rpm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,900 mm Heating/cooling: available Power: 1.1 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Todpfjxqa S Esx Ahuof Head: bolted lid Agitator: propeller Base: support feet Location: Bremen Technical documentation: drawing Jacketed cylinder tempering: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 1,345 liters Jacket volume: 24.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,370 mm Previous application: pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200°C HEATING / COOLING JACKET Bottom tempering: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: slight adhesions MATERIAL SPECIFICATION Jacket material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.4 mm

Condition: new, Year of construction: 2025, Starter Kit KM Pro for Powder Coating Consisting of Electric Curing Oven KM Pro + ASAP XS Eco In stock and available immediately Tedpfx Ahextf Azeusf Electric Curing Oven KM Pro ✅Heating medium: Electric ✅Heating type: Circulating air ✅Heating capacity: 30 kW (continuously adjustable) ✅Circulation air motor: 1.5 kW up to 250°C ✅Connected load: 380-400 V, 32 kW ✅Insulation: 150mm compressed ✅Working dimensions: 2200mm (L) x 1900mm (W) x 1700mm (H) ✅KM Pro control unit with crystal-clear touch display and intuitive operation ✅Remote maintenance KM Pro optional (additionally for only €2,200.00, controllable via smartphone or PC) ✅Loading via double-wing door ✅2x rack trolleys, half size for simultaneous curing ✅Automatic exhaust via actuator for smoke and temperature extraction ASAP XS Eco Powder Extraction ✅4,000 m³/h extraction capacity ✅2 polyester filter cartridges, each with 20 m² filter area ✅Working dimensions: 2300mm (H) x 1600mm (W) ✅Jet-pulse filter cleaning, manually switchable ✅Collection container with rollers ✅Powder baffle plate ✅Silencer for pleasant working noise levels ✅Mobile, can be rolled ✅Extraction fan 1.1 kW with IE3 motor ✅Sturdy construction made of galvanized sheet metal ✅Ready to connect via 16 A plug Now together for just €35,990.00 net, plus shipping For more information, feel free to contact us. LEASING / HIRE PURCHASE Together with our financing partner, we are happy to offer you leasing and hire purchase options (subject to good credit rating). Contact us for details. KM Industrieservice – The machine builder for your surface technology needs, specializing in powder coating. We manufacture: • Curing technology (electric, gas, oil, infrared, wood chips, hybrid) with certified curing results, available as KM Basic or KM Pro versions • Extraction and filter systems as standalone or cabin solutions in various designs • Pre-treatment systems for wet-chemical cleaning prior to coating, ensuring ideal adhesion conditions (manual, automatic, in all versions) • Blasting technology, manual or automatic, from small parts up to heavy-duty • Transport technology – for efficient parts transport (manual, automatic, lift-lower units, transverse shuttles, combination devices, and much more) • Remote maintenance – Fast and flexible service interventions Our Service Promise: ✅Highly individual consulting, manufacturing, and production tailored for even the most demanding requirements, all from a single source ✅Perfect fit and reliable delivery ✅In-house, German-speaking service technicians ✅Manufacturer expertise – As the OEM, we know your equipment inside out, and you can always count on immediate support. ✅Top-level and rapid spare parts availability ✅Long-term assistance for durable systems A video says more than a thousand words – Visit us on social media: ✅Instagram: km_industrieservice ✅Facebook: KM Industrieservice Would you like an in-depth consultation? We are happy to advise you personally: ✅02153-1377061. We look forward to your inquiry and to finding the right solutions for you!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Robatech Concept B 12/4 Tank capacity 12 litres, suitable for 4 hose connections. This glue unit has been fully tested and is fully operational. Additionally, you can order unused adhesive hoses (remaining from projects) at very competitive prices. Tsdpfx Ahew Rqmbsusf We also have several refurbished glue heads in stock.

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING Tedswmc I Dspfx Ahusf AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Tedpfxjwka Nye Ahuof Availability: short notice

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels Tjdpfxjxtc Ube Ahuef * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Including the following extras: * 2-inch kingpin * One

Condition: used, tank capacity: 2,500 l, GENERAL Features: Crane lugs Design: suspended Notes: Support ring made of Fe; minor dents in the insulation jacket; manway cover partially plated; manway diameter 490 mm Speed: 307 rpm Outer diameter: 1,880 mm Inner diameter: 1,590 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,250 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Base type: ring Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 2,500 liters Double jacket volume: 180.0 liters Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,380 mm Previous use: chemical industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Tjdjxqa Rzepfx Ahujf Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: aluminum EQUIPMENT Manway / Dome: on top head Outlet (alternative entry): 130 mm Note: slight adhesions MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Interference suppressor: Agitator arrangement: centered in top head

Year of construction: 2012, condition: ready for operation (used), A Cevenini roll slitting machine for adhesive tapes and foam adhesive tapes is available. Carrier width range: 0.4mm-280mm, knife diameter: 300mm, knife profile: B, max. mother roll width: 1600mm. Including various accessories such as grinding stones, pressing device, clamping jaws, etc. Documentation available. An on-site inspection is possible. Tsdexvrupjpfx Ahuof

Condition: new, functionality: fully functional, overall weight: 7 kg, SAUER DUO S3 renovation milling machine, brand new Voltage: 230V / 50 Hz Power: 1500 Watts RPM: 2200, head diameter 150 mm. A floor milling machine for: removing adhesives, removing paints, levelling concrete, etc. With proper dust extraction, the machine is suitable for asbestos remediation. We can offer the machine HM Splite with multiple milling heads HM Split. Todpfx Ahexp Supeuef SAUER Trioschleifer DTS 850. Demonstration machine 230 Volts / 50 Hz 750 Watts, weight 2.6 kg. Speed: 1500 - 13,000 RPM. We can supply this machine with a wide range of accessories (see the pictures).

Condition: good (used), Year of construction: 2011, Model: NILPETER MO4 Printing Width: 420 mm Number of Printing Units: 9 total (1 x Flexo + 7 x Offset + 1 x Flexo) Printing Process: Combination – Offset & Flexo Cylinder Gears (Tooth Counts): 200T / 192T / 184T Offset Units: 7 complete units including: – 7 blanket cylinders – 7 plate cylinders Flexo Unit: 1 integrated flexo printing station with cliché cylinder Additional Configuration: 1 lamination station installed after the final unit Gear Sets Included: – 7 blanket cylinders (200T) – 7 plate cylinders (200T) – 1 cliché cylinder (200T) – 7 blanket cylinders (192T) – 5 plate cylinders (192T) – 1 cliché cylinder (192T) – 7 blanket cylinders (184T) – 7 plate cylinders (184T) – 1 cliché cylinder (184T) Magnetic Cylinders: 1 × 184T 1 × 192T 1 × 200T Web Width: up to 420 mm Substrate Range: self-adhesive paper, film, foil Additional Features: UV curing, lamination, sheeting & die-cutting capability Condition: Good, complete with cylinders and accessories Location: Germany Availability: Immediate _____ TOOLING & ACCESSORIES • Full set of offset cylinders and gears (184T / 192T / 200T) • Magnetic cylinders (184T, 192T, 200T) Tsdpfx Asxv A D Ijhuof • Flexo cliché cylinder and lamination station • Complete technical documentation • Additional spare parts and tools available upon request _____ GENERAL CONDITION The press is in very good mechanical and visual condition, complete with all main printing units, gears, magnetic cylinders, and accessories. Ready for demonstration and inspection in Germany.

Condition: used, tank capacity: 10,875 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some areas, the previous operator welded stainless steel plates to the inside of the top flanges (with some of these plates cut open again; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Ring Tedpfsxqa Nwjx Ahuef Location: Bremen Jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,200 mm Last application: Adhesives industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum for jacket / shell side / bar: 1.0 bar Bottom temperature control: Half-pipe coil FEATURES Manway / dome: on top head Discharge: available Discharge (alternative entry): 100 mm Note: light residues, manway cover missing MATERIAL SPECIFICATIONS Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator positioning: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Condition: used, Year of construction: 2007, tank capacity: 29,000 l, GENERAL INFORMATION Design type: vertical Year of manufacture: 2007 Notes: Manhole diameter top head: approx. 700 mm; manhole diameter cylinder: approx. 500 mm; Rotational speed: 40 rpm Outer diameter: 3,200 mm Inner diameter: 2,980 mm Total height: 6,800 mm Heating/cooling: available Power: 75 kW Max. overpressure: 0.6 bar Agitator: beam agitator Base type: feet Location: external storage Technical documentation: drawings, CE marking and declaration of conformity Todpsxqat Nsfx Ahuof Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 29,000 liters Double jacket volume: 4,100.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 3,368 mm Previous use: adhesive production TANK Max. operating temperature tank/°C: 100°C Specific gravity of medium (to/m³): 1.3 (to/m³) Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / dome: on the cylinder, on the top head Outlet (alternative entry): DN 125 mm AGITATOR Agitator manufacturer: PRG Voltage: 400 V Bottom bearing: Agitator arrangement: centered in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 9 mm Top head wall thickness: 7 mm

Condition: used, tank capacity: 225 l, Location: Bremen Condition: used Volume: 225 liters Vacuum: 1.0 bar Max. overpressure: 1.0 bar Tank Max. operating temperature of tank: 95°C Top cover: removable / hinged top cover Construction: vertical Tank Stand type: frame Heating/cooling: available Double jacket volume: 60.0 liters Max. permissible operating overpressure: 4.0 bar Max. permissible operating temperature: 95°C Cylinder temperature control: double jacket Heating/cooling jacket Bottom temperature control: double jacket Insulation: available Insulation Todpfxjxqatvj Ahuof Insulation jacket: hermetically welded Insulation jacket material: stainless steel Inner diameter: 590 mm Outer diameter: 800 mm Total height: 2,400 mm Equipment Manhole/Dome: handhole Name plate: Equipment: lifting lugs Equipment Outlet (alternative entry): 25 mm Note: slight residue/adhesions Comments: 4-legged frame made of V2A; handhole diameter approx. 155 mm Last use: chemical industry Product-contacting material: V4A 1.4571 (AISI316) Material specification Temperature control system material: V2A 1.4301 (AISI304) Agitator Agitator manufacturer: Stelzer Power: 0.75 kW Speed: 156 - 838 rpm Agitator: propeller type Agitator seal: mechanical seal with thermosiphon vessel Agitator Voltage: 220/380 volts Explosion protection: motor is explosion-proof (compliance with local ATEX regulations must be checked) Agitator Current disruptor: Agitator mounting: centrally in the top cover Agitator adjustment: output adjustable by handwheel