Used 2 Colour Press for sale (84,934)

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz Rodpeyxp Twefx Adzscf If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 2000, The Carint central impression flexographic printing press is designed for printing on PE, PP, OPP, PET films, and paper. The machine features 6 printing units (6+0), a geared drive, and is suitable for a wide range of flexible packaging applications. Material width: 1,280 mm Printing width: 1,250 mm Print repeat: Min: 360 mm / Max: 1,040 mm Mechanical speed: Up to 300 m/min UNWINDER AND REWINDER Redpfx Ajzku Nlodzecf The machine is equipped with a non-stop turret unwinder and a non-stop turret rewinder. Maximum reel diameter: 800 mm. Expanding shafts: 3" DRYING SYSTEM Electrical drying system. INK SUPPLY 6 pneumatic ink pumps. ACCESSORIES • Motorized longitudinal register • Chamber doctor blade system • 8 Anilox cylinders • 6 Plate cylinders • Video inspection system • Web guides • Banana rollers • Plate cylinder lifting hoist • 2 electrical hoists • 2 cylinder storage racks with 6 cylinders of various repeat sizes

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Rcsdpfeyu Rw Iex Adzef Abutment height: 150 mm Weight: approx. 450 kg

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Description: Manufacturer: ASTOR Model: 52M Quantity: 2 units Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Rcodpfx Adezgtz Sszof Stable base for screwing onto a table Simple and reliable design Ideal for saddlery, footwear, and upholstery workshops.

Year of construction: 2009, condition: ready for operation (used), A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible. Rsdpfx Adezpyx Ajzscf

Year of construction: 2012, condition: excellent (used), functionality: fully functional, controller model: Simatic Mobile Panel 277 10", number of cylinders: 4, lifting height: 1,500 mm, pressing force: 250 t, operating pressure: 245 bar, main lifting speed: 290 mm/min, pressing speed: 400 mm/s, control type: PLC-controlled, Equipment: 3rd hydraulic function, hydraulics, Here you have the unique opportunity to acquire a thermoforming press from the premium manufacturer FRIMO. The press is in used, very good condition, has no outstanding maintenance requirements, and is available immediately. The press can also be modified and adapted to meet new requirements according to customer specifications. Please feel free to contact us regarding your planned project, and we will prepare a customized offer for you. The press is currently located in Sontra (Germany) and can be inspected by arrangement. The press is currently partially disassembled (platform, hydraulics, attachments, etc.) and can be completely reassembled if required. The press was last used in a multi-stage production line; the other equipment is also largely still available. The image (overview) shows everything schematically; this advertisement primarily concerns the 250t thermoforming press. Rjdpfsztm Ufjx Adzecf If we have piqued your interest, please do not hesitate to contact us at any time.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 408 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 50 mm, number of axes: 3, total height: 1,950 mm, total width: 1,500 mm, overall weight: 850 kg, product length (max.): 2,100 mm, This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details. • Voltage: 400 V • Phase: 3 Ph • Frequency: 50 Hz • Current: 22 A • Power: 7.0 kW • Duty Cycle: S6 40% • CNC Drilling Center c-express 920 classic • Clamping Collet System for CNC Through-Feed Technology • Drilling, Sawing and Milling Operations from Below • Laser "0" Double Reference • Drilling Head: DH15 • 6 Vertical Drilling Spindles • 9 Horizontal Drilling Spindles • 1 Grooving Saw in X Direction • Graphical User Interface • Machine Software License: 1 • CE Conformity • Maximum Workpiece Dimensions (X × Y × Z): 3000 × 920 × 50 mm • Minimum Workpiece Dimensions (X × Y × Z): 280 × 180 × 10 mm • 19" LCD Color Display • Mouse and Keyboard • Packed on Pallet: 2100 × 1500 mm Tools: • HW circular saw blade 100 × 5 / 3.6 × 20 Z24 / FZ • DP end mill D12 / NL23.5 / Z2+2+Q / GL80 / S20 / RL Redszuhctepfx Adzocf • ER32 collet, Ø20 mm • Drill bit Ø5 mm LL (3×) • Drill bit Ø5 mm RL (2×) • Drill bit Ø8 mm LL (4×) • Drill bit Ø8 mm RL (3×) • Through drill bit Ø5 mm LL (1×) • Drill bit Ø15 mm RL (1×) • Drill bit Ø35 mm RL (1×) • End mill Ø8 mm (1×) • End mill Ø10 mm (1×)Upon request, we can also offer suitable extraction systems (currently eligible for funding in Germany) and compressed air solutions

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Rcodpshtd E Aofx Adzof Technical data: Main pressing force from below: Number of press chambers: 2 Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Pressing system: hydraulic Permanent pressure control: included Packaging: separate Loading/unloading: in the longitudinal direction

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Rsdpfx Adozt Iaiezjcf Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 Rodpjzq Tz Tefx Adzecf * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: good (used), Year of construction: 2005, Straight Machine PQC-U: Print Quality Control Unit KPC: Semi Autmatic Plate Change Chromed Impression Cylinder Redpfeyvlg Iex Adzscf Chromed Plate Cylinder Powder Sprayer Automatic Blanket Washing Device Automatic Ink Roller Washing Device Plate Cylinder Cocking Impression Account: 45 Mio.

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Rcsdjzdgnbspfx Adzof Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Redsyu Rztjpfx Adzjcf Abutment height: 150 mm Weight: approx. 400 kg

Condition: new, Year of construction: 2023, pressure 6,2 t chamfer lenght 285 mm mm distance between columns 230 mm dayligth 215 mm throat 70 mm stroke 100 mm Rjdpfx Aszlulcjdzecf working feed 9,8 mm/sec return speed 50 mm/sec quantity of oil 10 l Control DELEM DA 41T total power requirement 0,7 kW weight of the machine ca. 250 kg dimensions 900 x 1300 x 550 mm Demonstration Machine â?¢ Basic C-frame design â?¢ Compact benchtop model â?¢ Ideal for prototypes and small production runs â?¢ Very short setup time â?¢ Functionally simple â?¢ Wide range of applications â?¢ Low noise level â?¢ Low power consumption â?¢ Easy to operate Includes optional equipment: - DELEM DA 41T CNC control

Condition: good (used), Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Rsdpfx Ajzcfdfsdzecf Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

Condition: used, Year of construction: 1998, Hydropneumatic operation Rsdpoyrrddsfx Adzscf Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Rodpfx Adeyrrbvjzjcf Weight: approx. 400 kg

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Redpfjzuzwqex Adzscf Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm Rjdpsyhggrjfx Adzscf • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: used, 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg QM46-2 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg QM46-2 Baujahr / Year 1999 - Serial-No. 959690 Bogenformat / Sheet size min. 140 mm × 89 mm - max. 340 x 460mm Druckgeschwindigekit / Printing Speed max. 10.000sh/h Dicke / Thickness 0.04 mm – 0.3 mm Rcsdpfjyw Ugajx Adzjf Dampening System DDS Autplate Plus Version Streifeneinleger - Strip feeder  Trockenbestäuber / Dry pollinators Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Rcodpfx Adsynalujzsf Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, 2 Farben Offsetdruckmaschine / 2 Color Sheet-Fed Offset Press PM-QM46-2 N+P Redpfx Adsyv A S Uozecf Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Rodpjzca Uxsfx Adzecf

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Rsdpfx Aefim Dwodzocf Number of strokes per minute: min./max.: 250 strokes/min. Ram stroke - max.: 20 mm Usable table area: WxL: 440 x 360 mm

Condition: used, Double-crimping press with 2 benches of cm. 110 x 65 Redpfxezb A N Ns Adzecf