Used Two Colors for sale (14,021)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 15630;15631, color channels: CMYK, number of print heads: 40, counter reading (black): 12,000,000, counter reading (color): 2,000,000, Equipment: auto duplex, documentation/manual, Only 2 (two) million clicks on color meter! 12 Million on black meter. Excelent condition! 30 kHz printing heads, Nodpsz E Uqcofx Akiolh 40 printing heads, all of them in mint condition, no streaking or any demage on heads. It was under full maintenance of Canon Hungary Canon unwinder andd Hunkeler RW6 rewinder included Acelabs AceformChecker Prit Validating System on machine. Best choice for spareparts or donor.

Condition: good (used), AFOS Defroster Model T1000 Defrost Twin Chamber Fully stainless steel Complete with refrigerator unit 400 v / 80 amps Njdpfxsx Ey Ufe Akielh

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When adjusting the height, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort fence T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Fence with lifting device, can be swung away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable fence for edge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table, left 500mm, right 500mm with two insert guide rails. 3-roller feed system HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed plug, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (L x W x H). Weight approx. 1800kg. Nlodpezbm Tfjfx Akish The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this supplier".

Condition: not inspected (used), Large-format printer Manufacturer: EPSON Nedpe Aaq U Tefx Akiolh Type: SureColor T5200 Resolution: 2,880 x 1,440 Maximum format: DIN A0 Maximum print format: 841 x 1,189 mm Features: network-enabled Print function: borderless printing Ink cartridges: individual color cartridges Display type: LCD display Display size: 63 mm Memory size: 256 MB Condition: untested, two color cartridges need to be replaced, therefore no testing possible.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. Nedpozmul Sefx Akislh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. Nljdpfx Aovlpctokieh DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: excellent (used), functionality: fully functional, Velati VbA MISCELATORE LT2000 | Multi-component mixing and feeding line / Filling mixing installation Manufacturer: Velati VbA Model / Type: MISCELATORE LT2000 Serial number: 349/88 Power: 15 + 15 HP (two mixing motor drives) Power supply: 380 V, 50 Hz Internal dimensions of the mixing chamber: 1900 x 1050 x 500 mm Working capacity of the mixer: 2000 liters Overall dimensions of the entire installation: 5000 x 4800 x 3400 mm Set components: - Two-shaft paddle mixer Velati VbA MISCELATORE LT2000 - Screw conveyor (elevator / lifting screw) Screw width: 330 mm Pitch: 290 mm - Outfeed belt conveyor Plastic belt Belt width 500 mm - Control cabinet / distribution panel: Rittal AE 1004 Nsdpfxe Ad Uzxj Akiolh - Gearbox / reducer: Bonfiglioli Riduttori MRA0 50/33 The Velati VbA industrial mixing and feeding line with a capacity of 2000 liters is a comprehensive installation designed for continuous and batch preparation of mixtures in meat processing, delicatessen, and food processing plants. The set presented consists of three integrated modules: a high-capacity, two-shaft paddle mixer (MISCELATORE LT2000), a screw conveyor (lifting screw), and an outfeed belt conveyor with a plastic belt. The heart of the set is the large-size, two-shaft mixer with a 15 + 15 HP drive, which ensures fast, uniform, and gentle mixing of meat fillings, sausages, ready meals, or vegetables without damaging the structure of the raw material. By combining the mixer with a screw elevator and an outfeed belt conveyor, the installation creates an automated process flow: it enables efficient transport of the raw material, accurate mixing, and mechanical, efficient discharge of the finished product and transfer to subsequent stages (e.g., to filling machines, formers, or cooking kettles).

Condition: excellent (used), Year of construction: 2022, operating hours: 1,850 h, functionality: fully functional, machine/vehicle number: 220, total length: 13,000 mm, total width: 5,700 mm, total height: 4,200 mm, overall weight: 37,000 kg, power: 404.52 kW (549.99 HP), TITAN 950 ARJES, in very good condition and with very few hours of use. Equipped with a shredding rotor and a magnetic pulley on the cross conveyor, this shredder completely removes ferrous materials. Nlodpfx Akoz D Dqcoijh

Condition: good (used), Year of construction: 2021, operating hours: 7,000 h, functionality: fully functional, overall weight: 46,000 kg, rotational speed (max.): 32 rpm, rotational speed (min.): 18 rpm, power: 566.33 kW (769.99 HP), Equipment: rotational speed infinitely variable, Lindner Urraco 95 DK – Year of manufacture 2021 – Well-maintained condition For sale is a Lindner Urraco 95 DK from the year 2021 with 7,000 operating hours. Nsdpfx Ao Afl Niokielh The shredder is in a well-maintained and operational condition. The exact condition can be seen in the pictures. The machine is equipped with the DK4 package and therefore has a reinforced gearbox and a reinforced shredder frame. ⸻ Equipment / Scope of supply Optionally available at an extra charge: * Individual rotor configurations for different materials, e.g. waste wood (A1–A4), household and commercial waste, roots, aluminum, and scrap. * Belt magnet for separating ferrous metals. * Rubber track system to protect the ground when used on sensitive surfaces such as asphalt and concrete. All of the mentioned equipment options are optional and can be purchased additionally at an extra charge, depending on your needs. They are not included in the basic price. DK4 package with reinforced gearbox and reinforced shredder frame. ⸻ Technical data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,000 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on the model) Rotor length: approx. 2,500 mm Rotor diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: Track-type, hydraulically driven Application areas: Scrap, commercial waste, bulky waste, mixed waste, wood, recyclable materials ⸻ Condition: Well-maintained machine Fully functional technically Sale is made as inspected on site Additional information / Maintenance history The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work has therefore been carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, incompleteness or changes in the information. The sale is made exclusively subject to prior sale.

Condition: used, Year of construction: 2022, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: GL61180KC, The 3E shredder is currently still in use. It will soon be replaced with a more powerful machine. Nlodpfxjz Rmt Us Akieh Shaft length: 1800mm 2 x 90kW motors The sale of this machine includes 1 new gearbox and 2 used gearboxes. Also included are 1 new motor and 2 used motors. For more information, please visit the 3E Machinery website, where we purchased this machine. This shredder has always been used for shredding car tires.

Condition: good (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, A shredder for waste processing in good condition is for sale. The system is complete (hydraulics, electrical components, and conveyor belt) and includes an additional shredding table. Njdpfsz R Ttvox Akijlh The machine can be inspected at any time.

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker Njdpjzw Tzgjfx Akielh The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Technical specifications: Type: Semi-automatic machine for producing hardcovers Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: used, Year of construction: 2017, operating hours: 1,030 h, functionality: fully functional, machine/vehicle number: 1001, total width: 2,550 mm, overall weight: 19,000 kg, hopper volume: 5,000 l, rotor diameter: 650 mm, rotational speed (max.): 14 rpm, HAMMEL shredder, type VB 650 D, No. 1001, Tier4Final • Year of manufacture: 03/2017 • Currently approximately 1030 operating hours / changing – machine is still in operation › mounted on a robust hooklift frame • Drive system - with Cummins QSB 6.7 Tier4Final diesel engine, approx. 275 hp - Emission levels comply with Euro standards - hydrostatic drive with performance-controlled hydraulic motors • Tool shafts - special, patented tool - speed of tool shafts 14 - 38 rpm - tool shaft length approx. 1,750 mm - tool shaft diameter with tooling approx. 650 mm automatic reversing function and forced reversing • Discharge conveyor - approx. 1,400 mm wide - discharge height approx. 3,400 mm Njdpjz Tc Efefx Akielh • Hopper consisting of - main and tilting hopper, approx. 5 m* total capacity • with hydraulic conveyor height adjustment via hand lever valve • Radio remote control, 6-channel, with emergency stop • Paint color: RAL 3020 red • Total weight with additional equipment approx. 19 t Machine equipment Shaft configuration • 5-piece shaft with 7/7 discs - refurbished 1 counter-cutting bar with comb • refurbished 1 axle with drawbar 1 permanent overband magnet • hydraulic height adjustment via radio remote control MACHINE AVAILABLE FROM FEBRUARY 2027

Condition: like new (used), Year of construction: 2005, operating hours: 20,000 h, warranty duration: 24 months, rotor diameter: 500 mm, rotational speed (max.): 165 rpm, year of last overhaul: 2024, MAQUINA COMPLETAMENTE RECONSTRUIDA // MACHINE FULLY REFURBISHED Longitud de entrada // Intake length: 1250 mm Anchura de entrada // Intake width: 2962 mm Longitud de rotor // Rotor length: 2962 mm diam. rotor // rotor diam.: 500 mm nº de rotores // nº of rotors: 2 off n.º de cuchillas // n. of knives: 2x27 (80x80) velocidad del rotor 1 // rotor 1 speed: 95 rpm velocidad del rotor 2 // rotor 2 speed: 75 rpm potencia motor 1 // main motor 1 power: 75 kW potencia motor 2 // main motor 2 power: 55 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 16000 kg * Máquina completamente reconstruida (rotor y contracuchilla completamente recargado); 1 año de garantía ó 2000h, lo que antes suceda Nljdsg D Ullopfx Akieh * Incluye: - Soporte de máquina - NUEVO - Tolva de alimentación - NUEVO - Cuadro de control eléctrico - NUEVO - Planos de implantación disponibles - Manual de instrucciones & esquemas eléctricos Includes: - Machine fully refurbished (included complete hard facing of rotor); 1 year guarantee or 2000h, whatever happens first - Machine specially designed for shredding of plastic waste. - Electric control pannel - NEW - Steel support for the machine - NEW - Infeed funnel for the machine - NEW - Dimmensional drawings available in Acad for the machine - Operation & maintennance mannuals available

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 1287, Two-head profiling machine, Cheyenne SP2 600, manufactured in 2024. Connection: 3 x 400 V, CE version. Dimensions: approximately 1300 x 1300 x 1600 mm (H), weight: approximately 580 kg. Maximum workpiece width: 600 mm, maximum thickness: 300 mm, minimum length: 300 mm. 2 brushes (maximum diameter 200 mm), 2 pressure rollers per unit, 2 extraction hoods with a diameter of 150 mm per brush. Adjustable feed rate: 3 - 12 m/min, fixed brush speed: 915 rpm, manual brush adjustment with handwheel and mechanical measuring rod. Motor power: 4 kW. Nedsz Ngkkspfx Akiolh

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Mobile shredding plant LINDNER URRACO 4000DS (semitrailer version) Nsdpfjz Hw Nqsx Akislh Diesel engine: 350 hp Discharge height of discharge conveyor: > 4.50 m

Condition: used, Year of construction: 2007, Format: 450 mm Equipment: Creasing tool: A rotatable creasing bar that provides three different groove widths (1.2 mm / 1.5 mm / 1.8 mm) Nodpfx Ao Afn H Djkijlh Perforating tool: A high-quality blade for Zollanvil perforation Zoll (e.g., for vouchers or admission tickets)

Condition: excellent (used), Year of construction: 2013, operating hours: 6,330 h, functionality: fully functional, total length: 8,600 mm, total width: 2,600 mm, overall weight: 38,000 kg, hopper volume: 8 l, rotor diameter: 850 mm, rotational speed (max.): 24 rpm, year of last overhaul: 2013, We offer this very good HAMMEL VB 850 DK two shaft shredder, year of construction 2013. Nledpoz Ik Aysfx Akijh Manufacturer: HAMMEL Model: VB 850 DK Year of manufacture: 2013 Condition: very good Category ID: 2100 Type ID: 2758 Type: two shaft shredder If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Nedpeya Hmiefx Akiolh Paper and cardboard (including paper rolls) White household goods

Condition: used, machine/vehicle number: H2X386V12010, Year of construction: 2019, operating hours: 14,594 h, load capacity: 1,600 kg, lifting height: 3,145 mm, mast type: duplex, overall weight: 3,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,145 mm Load capacity: 1,600 kg MACHINE DETAILS Mast design: Duplex mast with full free lift Nljdpfx Akoz S Ntaeijh Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery idle voltage: 51.13 V Service valid until: 10/2027 UVV (Occupational Safety) valid until: 10/2027 Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,200 kg Operating hours: 14,594 h EQUIPMENT Former Linde full-service unit EVO facelift model Color display Tilt angle display Side shifter Semi-cab Windshield with windshield wiper Roof window LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating High-quality charger, year of manufacture 2026 Additional hydraulics: 3rd valve Additional hydraulics: 4th additional valve for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 188

Condition: used, functionality: fully functional, operating hours: 1,616 h, total length: 584 mm, total height: 355 mm, total width: 330 mm, type of input current: AC, overall weight: 16 kg, Sales Description For sale is a Markforged Mark Two 3D printer, one of the leading professional fiber composite 3D printers for manufacturing high-strength functional parts. The printer is in good condition and has only 1,616 operating hours. Thanks to the ability to reinforce components with carbon fiber, Kevlar® (aramid), fiberglass, or HSHT fiberglass, extremely stable and durable components can be produced. Ideal for professional use in development, prototyping, mechanical engineering, motorsports, or the manufacture of fixtures and tools. The printer processes materials such as Onyx, Nylon White, PLA, and TPU, and offers a build volume of 320 × 132 × 154 mm. The scope of delivery includes numerous accessories and consumables:  Kevlar fiber  Fiber spools Nodpfx Akjzdnyqoiolh  Carbon fiber (already installed)  Dry box  Black PLA spools  New blue PLA spool  Print plate  Fiber load tubes  Fiber Bowden tube  Replacement nozzles  Torque driver  L-key set and other accessories Technical Highlights  Printing process: Fused Filament Fabrication (FFF) with continuous fiber reinforcement  Build volume: 320 × 132 × 154 mm  Materials: Onyx, Nylon White, Precise PLA, TPU 95A  Fiber reinforcement: Carbon fiber, Kevlar® (aramid), fiberglass, HSHT fiberglass  Tensile strength: up to 800 MPa (comparable to aluminum components)  Elastic modulus: up to 60 GPa  Precision print bed: flatness up to 160 μm  2nd generation extruder with material monitoring and out-of-plastic detection  WLAN connectivity (802.11 b/g/n)  Industrial quality for functional prototypes and durable end-use parts The printer is ready for immediate use and is suitable for both companies and ambitious users who want to manufacture high-quality, durable components.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t Nlsdpozdf Rusfx Akish The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: used, Year of construction: 2000, Format: 0x0 Equipment: Automated Plate Change (S-APC) Olivermatic dampening system Washing systems: Automatic blanket and ink roller washing systems Nledpo Adtmtsfx Akieh Stop action: Electronic stop action perfecting 2/0 - 1/1

Condition: used, functionality: unexamined, input voltage: 380 V, The machine (or at least a part of it) is an old coffee pad recycling (CPR-30) machine (see appendix). This shredder and blade assembly was used to tear open paper coffee pads and then separate the pad from the coffee using a vibrating screen located underneath the machine. Perhaps this machine is also suitable for other materials. Nsdpszvfxnofx Akielh Price is per unit.

Condition: refurbished (used), Equipment: documentation/manual, saw blade guard, scorer, Costa Leopard SS2 – multi-blade saw 2-axis multi-blade saw Nedpfx Aks Ad Uwgjielh Shaft diameter: 80 mm Number of saw blades per shaft: 16 Maximum cutting thickness: 145 mm Saw motor power: 92 - 92 kW