Used 2 Colour Press for sale (84,183)

Condition: used, Year of construction: 1998, Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Hnjdpfoyrrddsx Aguok Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Hnsdpfoyrrbvjx Agusk Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Hnsdpfx Ajxaxr Njgujk Very low running hours - 1351 run hours Complete with three filter set

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. • Suitable for: High-precision stamping, blanking, washers, discs, continuous strip processing Additional equipment • Manual decoiler Hnsdpfex E Ea Hjx Aguek • Servo roller feeder: G+K WVS/L 150 • Motorized recoiler

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg Hnodpfx Agsynalueujk

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Hodpfsyuyl Iex Agujnk Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards Hnjdpfx Agjuf Nr Asuok 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: new, Year of construction: 2025, functionality: fully functional, Pressure: 125 t Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Installation height: 500 mm Rapid traverse down: 200 mm/s Hnsdsx Sq Hljpfx Aguek Bending speed: 0–12 mm/s Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Basic configuration: - CNC control Cybelec CybTouch 15 - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant - Upper and lower tool clamping PROMECAM system, mechanical

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, total height: 4,300 mm, ram adjustment: 100 mm, installation height: 500 mm, table height: 1,000 mm, total width: 2,200 mm, table length: 1,400 mm, pressing force: 200 t, control cabinet width: 2,000 mm, stroke length: 160 mm, clearance between the columns: 1,450 mm, working width: 1,100 mm, distance between side stands: 400 mm, overall weight: 27,000 kg, height adjustment type: electric, space requirement height: 4,500 mm, space requirement length: 2,200 mm, space requirement width: 1,800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolyzers. Hnjdpfx Aet Nf Agsgujk hydrogen electrolyzers. The press is also suitable for (smooth) fineblanking, stroke rate 1 - 70 /min. Eccentric loads are also possible without any problems thanks to 4 connecting rod rams. It is also not possible for the press to jam. The press is completely overhauled and supplied with a new Siemens S7 control system.

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Hjdpfoflt Egsx Agujnk Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake Hnedpfxsflt Edo Agujk - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Hjdpfx Agjflt Ebsuonk Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Hodpfx Agoyvd Upsuonk Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Condition: used, System: Used chamber filter press Type: Passavant Application: Sludge dewatering Design: Bridge beam Year of manufacture: 1972 Hnjdpfxjwqyf Ie Agusk Filter plate size: 1200x1200 Number of plates: 59 plus head and end plate Filter plates: PP Filter cloths: optionally available, to be matched to the medium Filter area: approx. 270 m² Press volume: approx. 1700 dm³ Filter pressure: approx. 15 bar Pump technology: optional Purchase or rent: Inspection of the systems by arrangement at our facility.

Condition: used, System: Chamber filter press, used Hodewqyfhjpfx Aguonk Type: REWA Application area: sludge dewatering Design: side rail Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned Hnjdpfx Asx Dnb Uegusk • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 1963, stroke = 250 mm Hnjdpfxjydlxfs Agujk

Condition: used, Technical specifications: Hedpfjyv Atrex Agusnk Max. dimension of glued component: 1600 x 3000 mm 3 vertical presses 2 horizontal presses Hydraulic presses Power supply: 400 V Motor power: 1.5 kW Motor speed: 1450 rpm Overall dimensions: Length: 1200 mm Width: 3500 mm Height: 2500 mm

Condition: new, Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), pressing force: 25 t, stroke length: 480 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, table width: 780 mm, table length: 200 mm, oil tank capacity: 20 l, total length: 10,400 mm, total width: 7,800 mm, total height: 23,000 mm, operating pressure: 230 bar, MULTI-PURPOSE workshop / press Available in both 20 and 25 tons. BAR-MAN 20: 3,450 euros BAR-MAN 25: 3,990 euros Hjdst A Dznepfx Aguonk The BAR-MAN can be used for a wide range of applications. Examples include maintenance work, cutting keyways, pressing bearings in and out, and much more. With this powerful machine, you can tackle almost any task, all while maintaining maximum operator comfort.

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Hnodpfx Asyazdiogujk Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: used, Year of construction: 1992, Technical details: volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar Hjdpfx Agju Nzypjujnk - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition We don't sell spare parts nor have spare parts available! *

Year of construction: 1996, condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Hodpfx Aeq Awg Eegusnk

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure piston compressor with associated pressure vessel and control cabinet Type: QTOX 120/65/35 WM-W Max. final pressure: 66 bar Volume flow: 50m³/h Nominal power: 18.5kW Nominal speed: 1450min Voltage/frequency: 400/50V/Hz Year of construction:2000 Maschinen- und Behälterbau GmbH High pressure tank up to 65bar Type MB 00320-2,10 1000 liters Hjdeki Tzuspfx Aguonk Year of construction:2017

Condition: refurbished (used), functionality: fully functional, Refurbished four-cylinder hydraulic flat press of Italian manufacture. Branded multi-layer press for easy wood veneering. Veneering plate dimensions: 2500 x 1300 mm Plate opening: 400 mm Pressure over full surface: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic cylinders: 4 MYLAR Teflon foil on the plates Prepared for water heating of the plates Option to install a hot water boiler Price: EUR 7,200 ex VAT The overhaul status and readiness of the machine for collection must be checked in advance! Hnodpfxeyi U Rne Aguek In stock in Telnice near Brno, Czech Republic Testing, machine demonstration, and operator training are included as standard.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete Hnsdpfxeyb Sdij Aguok YOM 1991 Made in Germany Good working condition