IVAT welding fume extraction

IVAT AIR-TOWER 18000K

Condition: new, Year of construction: 2025, functionality: fully functional, ⭐️TM-R30 column lift for trucks - electric-hydraulic, wireless⭐️ The TM-R30 lift is a modern, reliable device designed for lifting trucks, trailers, agricultural machinery and other large vehicles. A set of four columns with a total lifting capacity of 30 tons (7.5 tons for each column) ensures efficiency and safety of work in workshops that require professional equipment for lifting heavy vehicles. Technical data: - Total load capacity: 30 T - Load capacity of one column: 7.5 T - Lifting height: 1750 mm (1900 mm) - Lifting / lowering time: 18 mm / s - Power supply: 230 / 380 V (operating voltage: 24 V) - Motor power: 4 x 2.2 kW - Column height: 2250 mm (2470 mm) - Arm length: 402 mm - Tire diameter: 500-1120 mm - Communication system: wireless or with signal cable - Certificates: ISO 9001: 2015, CE ✅ Wireless control and advanced technology TM-R30 is distinguished by a modern, wireless control system that ensures easy and safe operation. The columns communicate with each other via a stable radio connection, and the whole is operated using LCD screens with the ability to monitor the lifting height in real time. Additionally, the ability to switch to single or joint lifting increases work flexibility. Rsdov Uk D Rjpfx Aa Ejl ✅ Innovative design and reliability The TM-R30 lift is a fully electric-hydraulic device. 4 x 2.2 kW motors drive hydraulic pumps, which ensures smooth and quiet lifting. The lift is almost maintenance-free, and its design is resistant to demanding operating conditions. The columns can be easily moved, which allows them to be quickly adapted to different workspaces, and the ability to work on any sufficiently solid, horizontal surface adds versatility. ✅ Safety and certificates The TM-R30 has been designed with the user's safety in mind. Equipped with a safety lock system (Safety Lock System) and an emergency stop button on each column, it provides full control over the load at all times. The device complies with international quality standards - it is ISO 9001 and CE certified, which proves its high quality.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Rsdpfx Aelxyhfea Esl Maintenance doors as swing doors Maintenance easy.

Year of construction: 2022, condition: as good as new (ex-display), Welding rotary table Protec KT 1200 Kg Motor infinitely variable swivel and speed adjustable Motor 0,75 KW with remote control Foot switch Table diameter 1200mm height 1000mm Rjdpfx Aaecrmyfo Eel length 1400mm width 1500mm Speed from 0,05 to 0,5 rpm

Condition: new, Year of construction: 2024, load capacity: 6,000 kg, Equipment: foot remote control, Welding turntable, tank turning device 6000 Kg load capacity with hand and foot remote control Diameter from 160mm to 4000 mm Redpfegfql Aex Aa Ejl Drive rollers diameter 300mm Dimensions: length 1900mm x width 470mm x height 390mm Speed stepless 50 - 2000 mm / min. Motor AC 380 V

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) Redpfsrt H Izex Aa Eel each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Rsdpfx Ajfk Aivea Esl For more information please follow this link:

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock. Rodpfxjwhxiaj Aa Esl

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Rjdpeqcuvwefx Aa Eol Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Rodpfx Asxndynea Eol Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Year of construction: 2017, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, For sale: 1 gas-fired chamber oven with air circulation and bogie hearth Manufacturer: Nolzen Industrieofenbau GmbH & Co. KG Type: KLWg 220/180/650 YEAR OF MANUFACTURE: 2017 for unsupervised operation for three-phase 400Volt three-phase current for temperatures up to max. 700 degrees C. for natural gas "H", liquid gas Number of burners: 8 Total burner output: 720kW Rodpfx Aor Hmg Rea Esl For further technical data see attached PDF. The stove itself was only in operation for 4 years and has made approx. 100 anneals of 23 hours each during this time.