Front-Loading Panel Saws

HOLZMA HPP 380/43/43

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Nodpfxeyla I Re Agnoku Note: Further details regarding machine configuration can be found in the attached document.

Condition: used, machine/vehicle number: 007361, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Nkodpfxjx A Tibj Agnju Total number of drilling spindles: 19 Total number of tool changer positions: 3

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Max. panel length: 4250 mm Nsdpfx Ageyg Edmsnoku Main saw blade projection: 95 mm

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Njdpfjwuck Isx Agnoku Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Nodpfevvkqgjx Agnoku

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, cutting length (max.): 4,300 mm, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R Nedpfx Aoxpu Rgjgneku TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz MACHINE DETAILS Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm EQUIPMENT Rotation drive 1 loading station and 1 unloading station

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Nkodsv N D E Rjpfx Agnsu Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min Nkedoxxlqvjpfx Agneu The machine is in very good condition.

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (program pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping Jaw System Combi profile rail element, 2-track: 9 pieces Clamping jaws: 7 pieces Spacing: 75/275/475/1,050/1,850/2,650/3,450 mm Nkjdpfxox Nf E Rj Agnou Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Air cushion table nozzle manifold: 70 x 70 mm Feed and Program Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed backward: constant 130 m/min Program pusher speed forward: 80 m/min Program pusher speed backward: 80 m/min

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM (2100 x 4200 mm) is a dynamic and precise milling plotter based on components from global manufacturers, suitable for the toughest tasks, which works great in industrial production. Constant quality control and components used in the machine construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Sectioning table with four independent vacuum sections, made of rigid and durable HPL boards, Each section has holes to which negative pressure from the vacuum pump is supplied through a system of pipes, The main holes in the vacuum table have plugs that allow you to attach different formats of materials, Nkjdpovupu Usfx Agnsu 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . Adapted to automatic tool changing, which shortens machining time due to the lack of downtime associated with manual cutter change. 3.Drive Energy-saving high-end drives Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) controlled by the NK-105 G3 digital controller , they ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power via high-quality planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The movement of the gate along the X and Y axes is carried out by means of HIWIN guide rails and helical gear wheels, which guarantee many years of trouble-free operation and are made of high-quality hardened and tempered steel. 4. Construction The construction of the sliding gate is made of cast iron, which achieves incredible rigidity and absorbs vibrations generated during processing very well. 5. 8-tool magazine + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 collets The set includes holders: ISO30 and sleeves for mounting tools in the following dimensions: 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs.; 5-6mm - 4 pcs.; 7-8mm - 2 pcs.; 9-10mm - 2 pcs. 6. Vacuum pump and suction foot (optional) 4 independent vacuum sections. The pneumatically operated extraction foot is located at the spindle and allows for the connection of any chip extraction system, maintaining the cleanliness of the processing, safety and at the same time maintaining the precision of the work. 7. Software, INDUSTRIAL CONTROL : Control NK-105 G3 The machine supports the latest version of CAD/CAM software. OPTIONALLY The latest UCanCAM V12 software Technical parameters Working Field 2100x4200mm Z-axis 300mm Design Arm - cast iron / table - welded steel Drives 1500W Leadshine servo drives Table T-shaped / hybrid Spindle power 9kW Spindle Air cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin trolleys Material fixing vacuum, hybrid Vacuum pump vacuum 2x7.5 kW (option) Software UCanCAM V12 (option) Dimensions 5070x2870x1900mm Weight 3350 kg