Edgebander

Biesse Stream 5.5 A

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Kedpfxowvq Hgj Adhond Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Kedpst Hagnofx Adhend Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Knjdpfx Aor Ip Sdodhod Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: excellent (used), Year of construction: 2018, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Kodpfx Aewlbxledhond Automatic piece return system with Winner 4A bridge unloading

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness: 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized, adjustable infeed fence Pre-milling unit for processing before glue application station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-down devices GLU-JET automatic gluing unit. Cartridge + PUR bonding. Thin-film technology Adhesive height adjustment / contact nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatic rollers. NC servo axis End trimming unit for coils and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° bevel Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1, 3; R2 (2x) Bevel milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling top and bottom longitudinal edges and copy milling of the front and rear vertical end edges. Working height 60 mm. Radius R1, 3; R2 (2x); bevel 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); 45° bevel Nesting package Surface scraper unit with pre and post sensor Demand-controlled, oscillating buffing unit for final cleaning and edge polishing with 2 textile wheels Spraying equipment at infeed and outfeed, as well as antistatic agent at the pressure unit Infeed area with electronically controlled separating agent spraying device Pressure unit with electronically controlled antistatic agent spraying device Outfeed area with electronically controlled cleaning agent spraying device including cleaning agent Kjdpjxnmu Ijfx Adhjnd Automatic chain lubrication Barcode scanner MACHINE IS FACTORY SERVICED AND IN TOP CONDITION Year of manufacture: 2021 / Leasing options available Machine is connected and ready for demonstration at the exhibition center Available from stock Lieboch

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Knodpov Szt Defx Adhjd Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) Kjdpoxducrjfx Adhsnd - Available from end of November/beginning of December 2025 Please feel free to contact us if you have any questions.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,020 h, functionality: fully functional, For sale: Ksdpfjwtiq Ssx Adhend Nesting machine from Holzher with very few operating hours and top equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4980 kg Operating hours: 1020 Processing length X: 3100 mm Processing length Y: 2200 mm Vector speed: 110 m/min Equipment: Milling unit: 12 kW, air-cooled, 1000–24000 rpm Drilling unit (XL drilling head): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear: e.g. Lamello P-System Workpiece support: High-Flow nesting table with continuous vacuum area, 16-zone vacuum controlled by software Safety device: light barrier Workpiece clamping: 2 × 140 m³/h vacuum pumps, low-maintenance dry-running, additional 250 m³/h dry-running vacuum pump Tool changer: 10-position pick-up changer integrated in the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect DirectCut: line laser in X/Y-direction, incl. software Software: CAMPUS software machine license included, aCADemy CAD/CAM module and CabinetControl Base, “Warehouse” software module, Production software module, BetterNest free-form nesting

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters Knedjv H D S Sepfx Adhsd glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: new, Year of construction: 2020, operating hours: 1 h, SWISS KRONO Kft. offers the CNC drilling and milling machine MW2131KS Masterwood. As an attachment we are attaching the description of the machines as well as further pictures and information in a shared folder. Knodpfxerxubwe Adhed SWISS KRONO Kft. bietet die CNC-Bohr- und Fräsmaschine MW2131KS von Masterwood an. Als Anhang fügen wir die Beschreibung der Maschinen sowie weitere Bilder bei und Informationen in einem freigegebenen Ordner.