Ergotech Compact 800-300

DEMAG

Condition: used, Year of construction: 1994, operating hours: 36,170 h, machine/vehicle number: 50557900, power: 260 kW (353.50 HP), operating pressure: 9 bar, DEMAG air compressor including PARKER HIROSS air dryer! TECHNICAL DETAILS Godpfx Amey Iapnsusit Air pressure: 9 bar Air flow rate: 28 m³/min Motor rated power: 260 kW MACHINE DETAILS Electrical voltage: 400 V Electrical frequency: 50 Hz Max. operating temperature: 65 °C Refrigerant: 407C 7.5 kg Operating hours: 36,170 h EQUIPMENT Air dryer PARKER HIROSS POLESTAR SMART Type: PST460 Serial number: 398037030001 Year of manufacture: 2011 Motor power: 6.26 kW Weight: 525 kg

Condition: excellent (used), Boy 80M Gjdpfx Aomt Hh Ejmueit Year 1998 Closing 80 tons Scrow 36 mm Spray weighted 132 g spar distance 41x 35,8

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Giodpfx Aswd Hhcomuot Electrical data: 400 V; 50 Hz, total current = 18 Amps Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Condition: ready for operation (used), Column Jib Crane, Swing Crane, 80 kg Crane, Used Machine Gedpjv R Du Uefx Amujit Load Capacity: 125 kg Column Height: 3800 mm Jib Length / Reach: 1650 mm Chain Hoist: Demag PMV5-V2F6 Load Capacity: 80 kg Electrical Data: 400 V; 0.3 kW; 1.5 A

Condition: good (used), Year of construction: 2004, Peripheral devices MArke: Tool - Temp Type : TT - 157E Available 14x pieces Giedpfx Ameh Hbpwsuot

Condition: ready for operation (used), Column crane, jib crane, 80 kg crane, used machine Load capacity: 125/80 kg Column height: 3200 mm Jib arm length / outreach: 1700 mm Chain hoist: Demag PMV5-V2F6 Gisdpowfrgasfx Amujt Electrical data: 400 V; 0.05 kW; 1.5 A

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Giodpfox Sqi Hsx Amuot Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: used, Double Girder Overhead Crane 50T DEMAG Manufacturer DEMAG Type Double girder overhead crane Industrial Applications Heavy-duty lifting in sectors such as steel manufacturing, shipbuilding, heavy industrial workshops, logistics hubs, or port installations. Main Technical Specifications - Lifting capacity: 50 tons - Span width: 28 meters - Structure: Double girder - Lifting system manufacturer: DEMAG - Mounting: Rail or beam-mounted - Operation: Radio remote control or operator cabin depending on installation Gedpfx Amoxfh I Deuoit - Use: Indoor or outdoor depending on setup - Reinforced frame for extreme load conditions 🧩 Machine Usage The DEMAG 50T double girder overhead crane is engineered for heavy lifting operations in highly demanding industrial environments. Its 28-meter span width allows for safe and precise handling of large and heavy parts, enhancing workflows in production, maintenance, or storage facilities. ⚙️ Features / Differentiators This model stands out for its exceptional 50-ton lifting capacity, 28-meter span, reinforced double girder structure, and DEMAG’s advanced lifting technology, offering robustness, reliability, and stability for extreme-duty applications. Perfect for facilities requiring continuous high-performance operation.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/ Gijdpfxjx D Hnms Amujt

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Gijdpfey Rmfbjx Amuet

Condition: used, Year of construction: 1998, operating hours: 4,500 h, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Godpfx Amewi Uzhsuoit terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: Gisdpfx Amoyg Eu Sjuet 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Giedpfoy N R U Rex Amujt Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Gedpfx Aeub Umqomusit Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion Gijdpfjy N R Uqox Amujt 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190