Overhead crane Demag 5000kg 1978

Demag

Condition: used, Year of construction: 2022, overall weight: 300 kg, load capacity: 125 kg, Used pillar-mounted slewing crane from DEMAG, type KBK. The crane has a load capacity of 125 kg, an outreach of approximately 2,900 mm, and an overall height of approximately 4,000 mm. The lower edge of the jib is at approximately 3,500 mm, and the highest hook position is at approximately 3,250 mm. Heds Agxf Dspfx Akisw The system is equipped with a Demag DC-PRO 1-125 1/1 H5 V8/2 electric chain hoist, manufactured in 2022, with a load capacity of 125 kg and a lifting height of 5.0 m. The chain hoist has two lifting speeds of 2.0 and 8.0 m/min, FEM class 4m / M7, and a power rating of 0.18 kW. In addition, the system includes a mechanical Rieder box handling gripper with a load capacity of 45 kg and a GROHMANN ENGINEERING MP02 handling gripper with a permissible load of 45 kg. Condition: used, stored in disassembled condition.

Condition: used, Year of construction: 2012, machine/vehicle number: DCM-Pro 1-125 1/1 H2,8 V16/4, overall weight: 240 kg, load capacity: 125 kg, Used Demag slewing jib from the KBK/KBK-AL system with KBK I 3M-1 jib profile. The existing jib has an outreach of approximately 3,000 mm and is designed for manual slewing. A crane column is not part of this system; the jib with slewing bearing mount is included. The system is equipped with a Demag DCM-Pro 1-125 1/1 H2.8 V16/4 electric chain hoist, manufactured in 2012, with a lifting capacity of 125 kg and a lifting height of 2.8 m. The hoist features lifting speeds of 4.0 and 16.0 m/min and is FEM class 4m / ISO class M7. Condition: used, stored disassembled. Hode Agxd Ajpfx Akisw

Condition: used, total height: 1,200 mm, total length: 16,640 mm, total width: 3,510 mm, Colour: Yellow Empty weight: 3.000 kg Price: On request - Serial number: 13/6 KF2 - Lifting capacity [kg]: 3000 - Span [mm]: 16600 - Girder: Single - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 16640mm x 3515mm x 1200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodpfx Akezn H N Seisw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Hedpfxj Agk Drj Akiew You can find this and many other items on our platform.

Condition: used, Year of construction: 1998, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. You can find this and many other items on our platform. Hodo Agkd Eopfx Akisw

Condition: good (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, monorail trolley -Manufacturer: Demag, running gear chassis -Type: unfortunately without a type designation -Beam width: up to 155 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 250/195/H180 mm -Weight: 9.5 kg Hsdpfx Ao Agfxvjkisw

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 Hjdpfx Asptlblskiew with impeller for crane rail 2 pieces available, price per piece

Condition: ready for operation (used), Load capacity: 1000 kg Lifting height: 4000 mm Lifting speed: 8 m/min Drive: 1.5 kW Hsdpfx As Af Ih Sskiow

Condition: excellent (used), Year of construction: 2001, 1,0 used injection molding machine with robot, safety fence, and conveyor belt. Manufacturer: DEMAG Type: ERGOTECH100/420-430System Year of manufacture: 2001 Clamping force: 100 tons Hedps Afbx Tjfx Akiew Tie bar spacing: 420 x 420 mm Screw diameter: 35 mm Maximum injection volume: 168 cm³ Injection part weight: 150 g/shot Control system: NC4 Equipment: - Robot, Wittmann, Type: W711-0174, Year of manufacture: 2009 - Safety fence - Conveyor belt - 2 x core pull - Blow valve - Highly wear-resistant bimetallic screw - Dual-pump technology for parallel movements

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. Hode Afbz Ujpfx Akisw It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar