Edge banding machine

BIESSE STREAM B1

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Nledez Ekh Dspfx Ac Ajg Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: Year of construction: 2007 Total Load: 2 x 33,500 kg Load per tray: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Type 2, 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system approx.: 14.19 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Distances can be realized in steps of 25 mm by arranging the support profile, a prerequisite for high compression storage - Automatic full tray extraction table Price: On request, via email only Nlodswnankepfx Ac Asg Price: excl. VAT, including transport and installation Delivery time: in stock Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: used, machine/vehicle number: 008483, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr Njdpfxsyxmx Ro Ac Aelg

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Nlodpfx Ajx Dipmec Ajg Position 3: Single Edgebanders BIESSE-STREAM B1 9.0

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps Nlsdpfx Acoilqvrs Asg - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: used, machine/vehicle number: 008249, Type of edging: Thin edge, Thick edge Nlodpfozbrl Tox Ac Aeg Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008247, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Nlsdpfjzbrn Uex Ac Aeg Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES Nedpfx Aoy S E E Nec Aslg 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading

Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Nedpfx Acezqz Rij Aolg Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) Nledpfszuhd Rox Ac Ajg • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device Nlsdpfjylp Slsx Ac Asg enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 77503, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC Nodpoydidrofx Ac Aslg - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 1000004052, functionality: fully functional, Equipment: type plate available, For sale edgebanding machine Biesse Stream B1 8.5 with return table Nlsdou Suh Sspfx Ac Aeg Edgebanding machine in continuous use - edgebanding in PUR and AIR FORCE technology feed rate 1-25 mb/min wrapping methods - AIR FORCE - PUR - EVA maximum height of the elements being glued - 40 mm maximum width of the elements on the return table - 1300 mm line composition - 2 milling heads height 44mm - EVA / PUR overlay unit - AIR FORCE - drills - pre-profile cutters - rounders - groove saw - profile cyclers - flat cyclines - polishers magazine for 12 rolls of edge banding in case of questions please contact us.

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm Nljdpey U Naisfx Ac Asg (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Nsdpfsxw T Tpsx Ac Aelg Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking