Single Edgebanders

BIESSE STREAM B1 10.5 SOFT

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Godpfevxi Ddjx Aaxebl Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: excellent (used), Altendorf F45 Panel Saw Sliding table length: 3200 mm Cutting width to the right: 1300 mm Scoring unit Max cutting height: 120 mm Electric adjustment of saw blade tilt up to 45° Electric lifting and lowering of the worktable Main motor power: 5.5 kW Scoring motor: 0.75 kW Gbodpsxc Et Sofx Aaxol Saw blade speed variable via belt: 3000/4000/5000 rpm Max saw blade diameter: 400 mm CE certificate

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 120 mm Gjdpoya Hh Tsfx Aaxebl

Condition: ready for operation (used), Year of construction: 2019, This SCM Olimpic K560 edgebander was manufactured in 2019. It features a 7" touch screen display with Touch 7 electronic control, supports edging thickness from 0.4 to 3 mm, and handles panel thicknesses from 8 to 60 mm. The machine offers a feed speed of 12-14 m/min and includes a hot air edge banding system. Contact us for more information. • Machine Condition: Good condition • 7" touch screen display (16:9) with Touch 7 electronic control • Edging Thickness: 0.4 – 3 mm • Panel Thickness: 8 – 60 mm • Minimum Panel Length: 140 mm Gedpfx Aasyabq Aoxobl • Minimum Panel Width: 100 mm • Feed Speed: 12 – 14 m/min • Hot Air Edge Banding System

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Gbjdpfxjxwaz Hs Aaxol

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Gjdpfenzhxqjx Aaxebl Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: excellent (used), Working center with edgebanding unit in very good condition. Gsdpfx Aaeylcgpexsbl Technical data will be updated soon.

Condition: new, functionality: fully functional, input voltage: 400 V, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, rotational speed (max.): 6,000 rpm, overall weight: 710 kg, Equipment: CE marking, saw blade guard, Rod guideways – a solution previously found only in top-tier machines, now available as standard Slide table made of aluminum equipped with hardened guideways ensures smooth and precise movement Table extension and widening as standard – ideal for supporting large sheet formats Godpfeyt I Arox Aaxsbl Robust support table enables processing of heavy and large panels without the need for additional support Powerful drive motor guarantees maximum cutting performance, even during intensive continuous operation Easy angle reading set directly on the handwheel – comfort and precision in adjustment Scoring unit with independent motor included as standard Extendable telescopic stop (up to 3100 mm), mountable at the front or rear of the support table – flexibility and convenient handling Stable saw unit ensures precise, clean cuts without vibration Machine body with reinforced, stable design made of steel and grey cast iron combination – ensures durability, rigidity, and precise operation even under heavy load. Parallel fence with a robust, round 40 mm guideway – the tilting option makes material loading easier Workspace – minimum required floor area is 5 × 6 m Technical specifications Table size – length: 935 mm Table size – width: 620 mm Sliding table length – panel/roller: 3200 mm Sliding table width – panel/roller: 370 mm Sliding table, carriage type: Panel Edge trimming length / table movement: 3200 mm Blade size: 315 x 30 mm Max. cutting height 90°: 90 mm Max. cutting height 45°: 65 mm Cutting width with guide: 1295 mm Working height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Extension table: 1210 x 860 mm Main saw rotation speed: 4000 / 6000 rpm Scoring saw rotation speed: 8000 rpm Scoring saw size: 120 x 20 mm Extraction port Ø: 100 mm Motor power: 5.5 kW Motor power S1 100%: 4 kW Scoring unit motor power: 0.75 kW Voltage: 400 V Dimensions – width: 3445 mm Dimensions – depth: 3560 mm Dimensions – height: 1570 mm Weight approx.: 710 kg

Condition: good (used), Pillar jib crane, Demag / J.D. Neuhaus, 125 kg with pneumatic chain hoist – used - : Ex works price: now only €950 instead of €1,500 (net)! Manufacturer: Demag Chain hoist manufacturer: J.D. Neuhaus Gsdpfx Aovn Ri Heaxsbl Model: unknown or to be advised Year of manufacture: unknown or to be advised Load capacity: 125 kg Column height and jib length to be provided Condition: good Available: approx. from mid-January to mid-February 2025 Location: Munich. Later warehouse Frankenberg

Condition: reconditioned (used), functionality: fully functional, IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade The IMA adapter unit is a refurbished interchangeable unit designed for flush trimming operations and equipped with a flat scraper blade. Featuring the article number 10 237 069 and an HSK 63 F clamping system, this unit is ideal for precise and secure machining tasks. The unit’s rotation is synchronized with the drive rotation, and it includes a 57 mm opening. Specifically designed for use with IMA machines, it supports tools with chamfer milling cutters. Included in the package is a flat scraper blade. The bolt dimensions are 16/18.1 mm. The unit can reach a maximum speed of 9000 revolutions per minute and has a maximum probing depth of 1.5 mm. Following a comprehensive refurbishment, which includes inspection, replacement of bearings, and new pneumatic hoses, the unit offers maximum safety, precision, and a nearly new condition. Used adapter units are taken from operational systems and are fully functional. Any age-related wear or significant precision limitations are clearly noted. Technical Description • Product: IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade • Article Number: 10 237 069 • Clamping System: HSK 63 F • Condition: Refurbished • Rotation: Synchronized with drive rotation • Opening: 57 mm • Support Bolt: For IMA machines • Tools: Compatible with chamfer milling cutters • Flat Scraper Blade: Included • Bolt Dimensions: 16/18.1 mm • Maximum Speed: 9000 RPM • Maximum Probing Depth: 1.5 mm • Special Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Nearly new condition Note: Used adapter units are fully functional, extracted from operational systems. Explicit notice is provided for excessive wear or significant precision reductions due to aging. Gbjdpeudl Idofx Aaxel