Edge banding machine FULL 25m/min AirTec

HOMAG KAL370 AMBITION 2474

Year of construction: 2024, condition: new, Return System Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation. - Compatible with edgebanders from all manufacturers - Allows single-operator control of the edgebander - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 day - Turning device for small parts - With conveyor belt L 4500 x W 800 mm Single-track roller rail RTS Compact control, optional control box Iiodpfjw Nadmox Aa Iec Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Machine height: 4,950 mm Machine width: 4,380 mm Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A Iedpfx Aaoy R U Nzs Isic

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION Iedpfxjy D A Swj Aa Ieic BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Operating Units: 7 nr Iisdpfx Aew Tivmja Iec

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Ijdpfx Aast Hal De Ieic Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Iisdsytufgopfx Aa Iec Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Max cutting height at 90 degrees 140 mm Max cutting height at 45 degrees 97 mm Blade rotation speed rpm 3000/4000/5000 Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Max. panel length: 3800 mm Isdpfxoygtbts Aa Ieic Main saw blade projection: 55 mm No of Grippers: 4

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-EDGETEQ S-390 - LOOPTEQ O-300 Iijdpfxox Hpkle Aa Ijc Position 2: Panel Return Systems HOMAG-EDGETEQ S-390 - LOOPTEQ O-300

Condition: used, Year of construction: 2020, functionality: fully functional, Compact edgebanding machine of the EDGETEQ series for the small handicraft business with possibility of automatisation of the units. Basic equipment (2020): Control easyTouch Joint milling unit Gluing unit + 1 spare glue pot Cutting saw unit, double motor, pneu. adjustable Milling unit with manual adjust on flush, fibre, radius Form milling unit/Edgerounding unit Profile scraper, pneu. adjustable Flat scraper Buffing unit Iodpfx Aajw Tcpmj Ieic Technical data (2020): Machine length [mm]: 4.153 Workpiece width workpiece thickness 8 - 22 [mm]: 70 workpiece thickness 23 - 50 [mm]: 120 workpiece thickness 41 - 60 [mm]: 150 Workpiece thickness [mm]: 8 - 50 (opt. 8 - 60) Edge thickness [mm]: 0,4 - 3 Feed [m/min]: 11

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Max. panel length: 3800 mm Iiodpfx Aajy Edp He Ijc Main saw blade projection: 115 mm No of Grippers: 11