Used wide belt sanders 1300-1499mm working width for sale (141)

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Fpjdjwpm I Tspfx Andoi Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Fpsdpfx Asx Rpghendoi Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including new feed belt Equipment and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration Fodpfjwka T Sjx Andspi - With air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating cleaning brush on the outfeed side of the machine - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt alignment, ensuring uniform belt wear - With roller table at the infeed - With digital display unit for the motorized workpiece thickness setting - With additional veneer sanding pad - Including 2x spare sanding pads - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach

Condition: used, functionality: fully functional, Stemac COMET-1 combination wide belt sanding machine with sanding belts, working width max. 1300mm, workpiece thickness max. 160mm, workpiece thickness min. 3mm, as per images and inspection, self-dismantling Color: green Condition: used Payment method: prepayment by bank transfer Location of goods: carpentry workshop/hall 2 Shipping: Self-collection only - No shipping is offered for this item! Fedezh Naaopfx Andjpi

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine with 3 belts model DMC TECHNOSAND TC 1350 RRP second hand machine CE standard : YES machine with vacuum unit for table universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data: max. working width mm.1350 max. working height mm.150 min. working height mm.3 dimensions of abrasive belts mm.1380 x 2620 automatic centering composition machine ( 3 units , 3 independent motors ) : 1st unit : rubber roller diameter mm.240 - shore 85 . motor power Kw 18,5 Fsdpfx Ajyrrr Uendopi automatic blowers for cleaning abrasive belts 2nd unit : rubber roller diameter mm.240 - shore 45 . motor 2 speeds power Kw 12 / 15 automatic blowers for cleaning abrasive belts 3rd unit : electronic segmented pad n.34 sectors . motor 2 speeds power Kw 8,8 / 11 automatic blowers for cleaning abrasive belts brake with automatic intervention input roller conveyor output roller conveyor weight kg 3850 volt. 380/50

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,171 h, functionality: fully functional, grinding width: 1,300 mm, grinding height: 150 mm, Auction of a Boere grinding system consisting of Elite BKKS 1300 & Elite TKKS 1100! The system was overhauled by Boere in 2019! TECHNICAL DETAILS Maximum grinding height: 150 mm Maximum grinding width: 1,300 mm First motor power: 45 kW Second motor power: 30 kW Fjdpoy Tuvysfx Andjpi Third motor power: 18.5 kW Voltage: 380 V Current consumption: 172 Amperes MACHINE DETAILS First unit motor power: 45 kW Second unit motor power: 30 kW Third unit motor power: 18.5 kW Voltage: 380 V Current consumption: 172 A Operating hours: 12,171 h

Condition: used, machine/vehicle number: 008399, Max. machining width: 1350 mm Working Table: Fixed pass height Fodpfx Asy I Tm Hsndjpi No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height Vacuum feed belt: yes Fpodpfewvq E Aex Andsi No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 007614, Max. machining width: 1300 mm Working Table: adjustable Vacuum feed belt: yes Fpsdox A Tatspfx Andei No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Fpjdpewqdbmofx Andji

Condition: used, machine/vehicle number: 008400, Max. machining width: 1350 mm Working Table: Fixed pass height Fpodpfx Anoywafbsdji No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Min. machining thickness: 3 mm Fjdpfx Asy Nktmendjpi Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: used, machine/vehicle number: 007613, Max. machining width: 1300 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr Fedpsx A Tagefx Andepi

Condition: like new (used), Year of construction: 2013, operating hours: 250 h, Wide-belt sanding machine Bütfering Type: SWT 315/C Optimat Year of manufacture: 2013 Working width: 1350 mm Feed rate: 2.5 – 13 m/min, adjustable via frequency converter 1 combination unit with steel contact roller, with three options: - infinitely variable, frequency-controlled cutting speed 2-18 m/s, - calibration sanding with profiled contact roller - veneer and lacquer sanding - one electro-pneumatic segmented pressure bar with 25 mm segmentation - protected storage area on the machine for storing additional sanding pads - adjustable sanding belt blowing device, 5-stage adjustable, application-optimized cleaning results with low compressed air consumption Technical data: Working width: 1350 mm Sanding belt width: 1350 mm – 1380 mm Belt change side: left Workpiece thickness: 3 – 160 mm Operating voltage: 400 V / 50 Hz Drive motors: Unit: 20 kW Total connected load: approx. 23 kW Extraction nozzle: 1 x Dm 180 mm (unit) Extraction volume: approx. 1,830 m³/h BL 1 (1350 MM) BELT LENGTH 2150 MM Sanding belt length: 2150 mm UPGRADE TO MPS 1 Design of the segmented pressure bar as an electromagnetic segmented pressure bar MPS with program-controlled, current-controlled adjustment of the sanding pressure of each individual sanding segment, with 2 buttons per actuator in a 25 mm grid VAKIX 1/2 (1350 MM) VACUUM INTEGRATED (T3) High-performance fan for connection to a prepared vacuum clamping device with a 3 kW fan, nozzle diameter: 160 mm Fodpfx Aozb Ikxsndjpi Extraction volume: 940 m³/h FBM (1350 MM) FINISHING BRUSH Driven finishing brush on the outfeed side of the machine Nozzle diameter: 140 mm Extraction volume: 1100 m³/h ATA 2 (1350 MM) SUPPORT TABLE, FOLDABLE Support table approx. 900 mm long with an integrated roller at the outfeed (foldable) Machine weight: 2800 kg

Condition: new, Working width 1350 mm Fodpformucxex Andepi Number of sanding units 2 st. Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Fpodpfx Ajhtuvrsndji Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Fpjdpfod E Ixzsx Andei • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, working width: 1,300 mm, overall weight: 4,700 kg, height adjustment type: electric, Wide-belt sanding machine Manufacturer: Viet Type: S3 223 TM Year of manufacture: 2006 (CE) Well-maintained calibrating and fine-sanding machine from a small carpentry/manufacturing workshop, suitable for sanding solid wood, veneer, and lacquered surfaces. Working width: 1300 mm Constant table height, motorized height adjustment of the machine’s upper part (the machine is also suitable for inline operation). Fpsdpfxozd Ayls Andei Automatic workpiece detection, thickness measurement, and infeed protection. 1x cross-sanding unit, sanding belt dimensions: 150 x 5520 mm 1x combination unit with calibrating roller and electronic segmented sanding shoe, segment pitch: 25 mm 1x cleaning brush for removing dust from workpieces 1x ionizer to prevent static charging Feed rate infinitely adjustable Vacuum transport for small, short, or slippery workpieces (e.g., lacquered parts) Operating voltage: 400 V, 50 Hz, 3 phases Dimensions: approx. 2500 x 2850 x 2280 mm (L x W x H) Weight: approx. 4700 kg

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: C03/136, The machine is available immediately. Fpedpfezi Avwex Andoi

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: Fodpfjy T Ip Tox Andopi - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 1996, operating hours: 12,171 h, Colour: Grey BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 Fpjdpfxjwnh Eqo Andei First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: No - Bottom sander: - CE certificate present: No - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Sanding pad present: No - Top sander: - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Structuring brush present: No - Sanding pad present: No - Voltage [V]: 380 - Current consumption [A]: 172 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, 1. Combi aggregat with steel roller and electronic segmented pad working width 1350 mm, motor 15 kw, sandingbelt size 2620 x 1350 mm use full for sanding of Solid wood, veneer, laquer available from march 2026 Fpjdoym Rdrspfx Andoi

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM Fjdpfx Anjym Rl Nsdopi total 30 kw - total kg ca. 1900

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, COSTA wide belt grinder, two-roller model, 1350 mm roller width. The machine features a contact roller and a finishing polishing platen. Fpodpfx Aey Tx Exjndji

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Fodpfoypwarox Andepi Workpiece thickness max. ca. 150 mm engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.