Used tool milling machines - univ.conv. 0-399mm X-axis travel for sale (131)

Condition: used, Year of construction: 1987, FRIEDRICH DECKEL PRECISION MILLING MACHINE MODEL: FP4M YEAR: 1987 approx. Gedpfx Acezv Eg Soijkb HEIDENHAIN DIGITAL READ OUT CLEAN

Condition: excellent (used), Year of construction: 1987, operating hours: 800 h, Deckel milling machine FP 5 A Contour, in excellent condition, with numerous accessories. It has not been in operation for the last 20 years. Gkjdoz Afdwepfx Acisb

Condition: used, Year of construction: 1984, x-travel 300 mm Gjdpfx Acszz S Dueiskb y-travel 160 mm z-travel 340 mm digital readout 3 Achsen HEIDENHAIN spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min quill stroke 60 mm table-size 600 x 210 mm feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min power capacity 1,6 - 2,0 kW table load 200 kg voltage 400 V weight of the machine ca. 800 kg dimensions of the machine ca. 1,15 x 1,15 x 1,65 m electric cabinet 0,60 x 0,35 x 0,90 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light

Condition: used, Year of construction: 1998, STIMIN Oradea FUS-22-2M Universal Tool Milling Machine Universal Tool Milling Machine STIMIN Oradea Type/Model: FUS-22-2M Condition: Used Year of manufacture: 1998 Technical data: Travel, X-axis: 300 - 320 mm Travel, Y-axis: 240 - 270 mm Travel, Z-axis: 300 - 310 mm Tool holder: SK 40 / ISO 40 Spindle speed: 45 - 2,240 rpm (in 18 steps) Quill stroke: 60 mm (manually adjustable) Gkjdpfx Aszxhndjciob Clamping surface: 670 x 320 mm Max. table load: approx. 75 - 150 kg (depending on table design) Feeds (X/Y/Z): 12.5 - 630 mm/min Rapid traverse: approx. 1,200 mm/min Spindle motor power: 1.5 kW - 2.0 kW Total connected load: approx. 2.5 – 3.0 kW (400 V / 50 Hz) Space requirement (L x W x H): approx. 1,200 x 1,100 x 1,620 mm Inquiry item: Transportation costs will be provided in an individual offer.

Condition: new, Technical Data: Fixed angle table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working spindle: Tool holder, horizontal and vertical: ISO 40 Power of the main drive motor / 100% duty cycle: 2.2 kW Vertical milling head: Speed range, stepped: (12) 50 - 2000 rpm Drill quill, stroke: 100 mm Swivel range: +/- 90° Travel distances: X-axis, automatic/manual: 385/400 mm Y-axis, automatic/manual: 185/200 mm Z-axis, automatic/manual: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: continuously adjustable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle runout max. 0.005 mm, incl. test report according to DIN 8615 (roller bearings SKF®/NSK®) - Vertical milling head can be swiveled for horizontal milling (without disassembly) - All critical parts of the machine, e.g. machine frame, table, milling head, housing, etc., are made of stress-relieved MEEHANITE® quality cast iron (FC 30) and are extensively ribbed to provide the machine with maximum stability and working accuracy. All guide rails are coated with TURCITE®-B - All machined surfaces in the working area, such as guide rails, table surfaces, T-slots, etc., are hardened and precision-ground. - The powerful drive transmits the power of the main motor to the gearbox via belts. - All axes have their own DC servo motors. These enable sensitive, stepless adjustment of the feed speed. Standard equipment: - DC servo motors for all axes X/Y/Z, incl. electromagnetic brake - Fixed box table - Original Ganter Norm® safety handwheels - Chip collection tray - Backlash-free HIWIN® precision ball screws in all axes X/Y/Z - Gearbox for main spindle - Safety device according to CE or better: - Spindle guard with several micro-switches, adjustable in several steps (enclosure available as an option) Gkodped R S Ndjfx Aciob - Two emergency stop pushbuttons (1 x machine frame, 1 x control panel) - Mechanical Ganter Norm® safety handwheels in all axes - Electromagnetic spindle brake (for immediate spindle stop) - Electrical overload protection for all axes - Electrical equipment SIEMENS®, BALLUFF® - Braking system prevents the table from dropping - Three reducing sleeves SK 40 to MK 1, 2, 3 - Collet chuck with holder according to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Draw-in thread spindle - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Lamellar stainless steel cover for the Z-axis guide rail in the working area - Machine light - Coolant system integrated in the machine base - Test report according to DIN 8615 - Operating tool - Machine according to CE - Operating manual, parts list, incl. electrical wiring diagrams, etc.

Condition: excellent (used), Deckel FP 4 MK Deckel FP 4 MK machining center with Heidenhain TNC 113 control, manufactured in 1990. Fully overhauled by FPS in 2021. Excellent condition, CE compliant!! The machine comes from the prototype construction department of Castwerk Technologies. Technical data: Year of manufacture: 1990 Fully overhauled by FPS in 2021 Digital display: 3-axis active digital display HEIDENHAIN TNC 113 Travel in X-axis: 500 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping, DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Tilting table Table clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and equipment: Heidenhain TNC 113 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating instructions for the control and programming examples Handwheels Gedjzy U E Espfx Aciskb Coolant system About the machine: Offered is a Deckel FP 4 MK machining center with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Deckel on site while it is powered on. You can find more milling machines from well-known manufacturers on our website.

Condition: good (used), – ISO40 – 50–2500 RPM – Table 600 × 220 mm – Automatic feed – Rapid traverse – Digital position display – Swiveling milling head – Protective cover Gkodpfxozxmc Tj Acijb – Emergency stop – Tool – Lighting – 400V

Condition: good (used), x-travel 300 mm y-travel 160 mm z-travel 360 mm Gksdpfx Acow U Shhoijb Total power requirement 1 kW Machine weight approx. 0.8 t various engraving kits

Condition: good (used), functionality: fully functional, Internal article number: 26054 Universal milling machine Deckel FP1 + Heidenhain digital display Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Power consumption: 1.9 kW Number of spindle speeds: 16 Godpfx Acjzx T Agoiokb Speed range: 40-2000 rpm Tool holder: SK40 The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running, in our heated warehouse covering an area of over 500 m².

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm dimensions of machine L x W x H 1,35 x 1,05 x 1,63 m total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, Gkedpfxswngkro Acijb DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant

Condition: used, Macmon M 100 E – Universal milling machine Gkodszzymqepfx Aciob -Travel ranges X / Y / Z: 310x340x170 mm -Spindle speed range: 50 - 2500 rpm -Automatic feeds and rapid traverses in all 3 axes -Tool holder: ISO 40 -Swiveling vertical head -Tilting table: 600x220 mm -Total power consumption: 2.5 kW -Documentation Dimensions: L x W x H: 1.5 x 0.7 x 1.5 meters / Weight: 900 kg Errors and omissions excepted.

Condition: used, Year of construction: 1992, Universal tool milling machine Manufacturer: MACMON Model: M 100 E Year of manufacture: 1992 - workshop tested Machine no.: 1714 Geometric inspection with test report Accessories: - 3-axis digital display K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Operating manual Gjdjzxz Nhepfx Aciskb Used, as is, no warranty The machine is technically in the condition corresponding to the year it was manufactured.

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone SA40 DECKEL Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Gjdpjzy Rfujfx Aciokb Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone CM4 DECKEL Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Gksdpfxozy Rfhj Acijb Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Deckel FP1 milling machine with Heidenhain digital control in very good condition. Technical specifications: * Speed: 40 - 2000 rpm * Feed rate, continuously variable in 3 axes Gkjdpfxozr Hdws Acijb * Rapid traverse in 3 axes * Spindle brake * Table travel X/Y/Z: 300/160/340 mm * Vertical quill * Clamping system SK40/M16 * Weight approx. 800 kg Accessories and equipment: 3-axis Heidenhain digital read-out Coolant system Operating manual, spare parts list

Condition: good (used), Deckel FP1 milling machine with 3-axis Heidenhain digital display, fixed angular table, and SK 40 spindle mount. Accessories: counter supports, various collets. In good, operational condition. Can be demonstrated under power by arrangement. Gsdpfxszy Hnlo Aciokb

Condition: excellent (used), Used Deckel FP 1 Aktiv tool milling machine. The machine is in good technical condition and ready for operation. It has a robust construction and the necessary functions for performing precise milling operations. Godpfxjzy Rwwe Aciokb The machine is equipped with manual and automatic feeds, as well as automatic feeds controlled by a simple NC system. Net price: 23,000 + VAT Spindle taper: 40 Travel: X: 300 Y: 160 Z: 340 Spindle speed: 63-2000 rpm Extendable quill

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Godpfx Asxfkm Ascijkb Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Gedpfx Aeuvih Hsciskb Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg Gsdpjzr Hrzofx Aciokb dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Gkodpezrt Rkefx Aciob Coolant equipment

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg Gsdpfjyg I Nfjx Aciskb

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Gedpfx Acezwuc Esiokb

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise Gkjdpfx Acoz Aa Idoiob - Chip tray Milling cutters and tool holders can also be included upon request. Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen. Godpszx Ep Sjfx Acijkb