Used other waste management & recycling machinery for sale (81)

Year of construction: 2002, condition: like new (used), L x W x H: approx. 12,1 x 3,0 x 3,25 m Volume: 55 cbm capacity: approx. 150 m³/h 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t., Gsdpfellvpzsx Aayouk

Year of construction: 2019, condition: ready for operation (used), A GKM tumbling screen machine including a bolt screen changer with backflush function is available. Screen area: 2.6m², diameter: 1900mm, grain size: 1µm-20µm, screening capacity: 1kg-50000kg/h, bulk density range: 20-10000g/l, separation range: 20µm-20 mm, screen decks: 4, speed: 180rpm, height: approx. 1750mm, weight: approx. 1500kg. Documentation available. On-site viewing is possible. Godpfx Aexxl N Eoaysuk

Condition: good (used), Used Thetford International T3 waste compactor. Gujdpfxohvi Ahs Aayok

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Gujdpfx Aou Tg I Dsayek Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Year of construction: 2025, condition: new, maximum load weight: 800 kg, Applications & Customer Benefits: Our container scales with tilting hopper provide precise, high-accuracy gravitational dosing for waste balers, recycling lines, automotive manufacturing, and bulk material handling. They ensure consistent measurement, boost process efficiency, and handle diverse materials such as sheet metal, cans, broken glass, and other recyclables. Key Features: • High-precision weighing with 3 Siemens load cells • Weighing capacity up to 800 kg • Integrated machine calibration system • Optional supporting structure for flexible installation • Customizable color to match customer requirements Gusdpfsw Rlkzsx Aaysk Tech Highlights: Qmax 800 kg · Siemens load cells (3×) · Built-in calibration system · Optional support frame · Custom color

Condition: used, Auction item. Tires/Plastic recycling line was in working condition. Line includes: -rubber granulator, Grizzly M-80, year - 1990; -main shredder, Satrin ZMK-40, year - 1992; -four shaft shredder, SMK-40, year- 1993; -rasper shredder, Eldan - 1200, year - 2008; -magnet-separator, year - 2007; -magnetic conveyor, year - 2010; Gsdpfjx Ez Adox Aayeuk -conveyor, year - 1990; -conveyor, year - 2011; -self-made cutter, year - 2016. Used 2,5 years ago. At this time it is taken apart and standing outside, visible in photos and video. There is more photos and video from time when it was being used.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, overall weight: 5,000 kg, cutting force: 40 t, input voltage: 400 V, number of blades: 1, power: 18.5 kW (25.15 HP), roll length: 2,600 mm, roll diameter: 1,500 mm, noise level: 85 dB, Roll Slitting Machine BOA HRSM 40T 1500 x 2600. This machine is perfectly suited for cutting large rolls of paper/cardboard or even plastic into pieces. The machine is sold in a refurbished condition. It is currently being overhauled and will be provided with a new coat of paint. The machine is supplied with an infeed conveyor and outfeed table. The transport belt is 3,000 mm long and 2,000 mm wide. Technical specifications roll slitter: Maximum roll diameter: 1,500 mm Maximum roll width: 2,600 mm Cutting force: 40 tons Gusdpfx Aajxbddaoysk Drive: 18.5 kW Cutting speed: approx. 4.5 cm/sec The machine can be inspected at our facility in Almelo.

Condition: ready for operation (used), A single-shaft shredder Lindner is available. Power: 160kW, working width: 2525mm, rotor speed: 100rpm, knife system: Mono-Fix, hopper opening X/Y: 3200mm/2400mm, volume: 5.6m³, filling height: 2600mm. Machine dimensions X/Y/Z: approx. 4750mm/2500mm/3400mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible. Gsdpjxvruijfx Aaysuk

Condition: new, Year of construction: 2025, functionality: fully functional, The Mercedes of cable peeling machines! The PR3 Evolution is produced entirely in our factory near Ulm. All purchased parts come from well-known manufacturers such as Siemens (electrical), Rittal (switch cabinet), KEB (gear motor) and Nachi (ball bearings). A machine truly MADE IN GERMANY! Robust, reliable and safe. The PR3 Evolution complies with the EC Machinery Directive 2006/42/EC Annex II A Technical data: Guodougt Dxopfx Aaysk Motor power 4kW / 380 V Cutting speed 44m / min Working range 1.5 mm2 - Ø 90 mm weight approx. 700 kg Dimensions W 1000 x L 1800 x H 1520 mm Paint finish Ral 7037 / 7035 Subject to technical modifications 40 years of experience and over 500 machines sold worldwide speak for themselves.

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Gjdpfxou Thx Re Aayeuk Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2025, condition: new, total length: 2,000 mm, total width: 1,600 mm, total height: 2,700 mm, Applications & Customer Benefits: Gedpsw Rn Ebefx Aaysuk Our industrial control cabins deliver safe, ergonomic, and high-visibility work spaces for operators in heavy loading, production machinery, and industrial material-handling environments. They improve productivity, reduce operator fatigue, and ensure reliable operation in manufacturing, construction, and logistics applications. Key Features: • Transparent safety walls for full 360° visibility • Ergonomic operator station with adjustable seat, steering wheel & pedals • Air conditioning + non-slip flooring for comfort & safety • Available as standalone cabins or with support substructure • Compact, easy-to-install design for diverse industrial setups Tech Highlights: L 2.0 m · W 1.6 m · H 2.7 m · Usable area 3.1 m²

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. Godpfxsxta D Ts Aaysuk This module is part of our rental fleet.

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg. Gedpfx Aajp I I U Doyeuk

Year of construction: 2020, condition: ready for operation (used), Four identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Guodpfx Asugmwlsayek

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, Plant consisting of granulator, sorting table for the separation of free Gusdpfeghgizex Aayek and copper granules, suction system and control cabinet. Each as transportable elements pre-assembled on base plates. Advantages of the compact plant: low overall height, low space requirement, easy-to-clean and easy-to-maintain arrangement of components, short assembly time and, last but not least, the favorable price.

Condition: used, Year of construction: 2023, operating hours: 1,000 h, Self-propelled compost turner for the treatment of organic waste such as green waste, bio waste or microbiologically contaminated soils. JT630, semi-autonomous - windrow width up to 6.30 m - windrow height up to 2.9 m - radio-controlled with semi-autonomous functions - up to 25% fuel savings - Easy to transport and quickly ready for use Guedpeizku Eefx Aaysk

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,192 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, number of blades: 70, type of input current: AC, WEIMA FineCut 2500-800 shredder Machine in good working order, used in the production of alternative fuel. Currently out of use, ready for loading. Gedpfx Aaewh Rcfjysuk

Condition: used, Year of construction: 2022, operating hours: 289 h, functionality: fully functional, machine/vehicle number: B0201, total width: 2,450 mm, total length: 6,050 mm, total height: 2,700 mm, empty load weight: 9,600 kg, Our FEED VIBRO features a combination of feed hopper, leveling roller, and dosing slide, ensuring consistent material feed. Thanks to the integrated drum magnetic separator with selectable strength, magnetic particles can be sorted. If pure dosing without magnetic separation is required, the magnet system can be deactivated. Gsdpfx Aaoxrtt Soyeuk This module is part of our rental fleet.

Year of construction: 2021, condition: new, The container scale from WeDi GmbH is used to record the degree of filling of roll-off containers. It consists of 2 drive-on ramps 1000 mm x 400 mm x 160 mm made of steel plates 10 mm thick, incl. end stop with stiffening plates and struts, as well as lateral centering rail and fixing holes. 1 piece weighing beam 100 mm x 100 mm, length 2.300 mm, design as U-profile, 10 mm thick, with holes for fixing the load cells. 1 piece weighing beam 100 mm x 100 mm x 1.400 mm length, design as U-profile, 10 mm thickness, with holes for the fixing of the load cells, incl. support plate made of 10 mm steel, stiffening plates made of 10 mm steel plates and 20 mm x 20 mm square steel for the lateral guidance of the weighing beam. For weight recording serves 1 pcs. load cell kit BKSB 15000 weighing range 15000 kg, readability 2 kg with 4 x load cells K30S 5000 with distance plates, 4 load feet, 1 clamp and trim box JBB-04 and 10 m scale cable to display electronics. As weighing electronics serves a scale electronics BWI, illuminated 50 mm large display, dimension 250 x 160 x 60 mm. In high-quality, flat plastic housing, user-friendly operation. Basic functions: Tare, Zero, Large/Net. The container scale is programmed after assembly by us to zero = empty cat 3 container empty weight. The power supply is 220 Volt. Gedpfx Aegyph Asayeuk Price: 5.620 € plus VAT.

Condition: used, functionality: fully functional, operation weight: 14,300 kg, Year of construction: 2016, operating hours: 4,800 h, RENTAL The machine offered is for rental only!!! Prices: Daily rate: €780.00 Weekly rate: €2,800.00 Gjdswtq Ifspfx Aaysuk Prices excl. VAT.

Condition: new, In every calculation of the economy and public life, waste transports are an essential factor. Here, it is less the weight but more the volume that is important. The constantly rising transport costs of these wastes are increasingly an economic problem. Particularly important in the sales sector is the disposal of the large quantities of styrofoam or packaging films. The VOLUMEN-ZERKLEINER ensures a volume reduction of up to 80 percent at this point. Bottles of all types and sizes, e.g. champagne bottles, can be crushed without any problems without a depressing device. The unpacking of expired foodstuffs is also possible. Furthermore, reject products such as medicines, data carriers or counterfeit products can be rendered unusable. Food scraps and food waste, even bones, can be shredded with the VR60, collected and converted into electricity and heat in biogas plants. Think also, for example, of a deposit bottle machine. The PET bottles are pressed and kept under lock and key until they are taken away because of the barcode present. By using the VOLUME SHREDDER, one could make the barcodes of the PET bottles unrecognizable and thus achieve a huge volume reduction. Shredded bottles could now be collected in a large container and would therefore not have to be collected daily from the collection points. The vertically moving, wear-free knives of the shredder ensure a quiet and clog-free working process. ALL ADVANTAGES AT A GLANCE Rotation-free shredder No material build-up due to non-rotating knives Automatic feeding by the movement of the knives Automatically reversing knives in V-shape prevent jamming or sticking Quick component change due to modular system Intelligent control by compact logic system (PLC) One-button operation Ejection of the material optionally also possible via conveyor belt Shredder module can also be integrated into existing plants Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL Dimensions: 90 cm x 70 cm x 85 cm Weight: approx. 190 kg Power consumption: 3 kW Gujdpfx Ajghgc Hoayek Connected load: 400 V three-phase alternating current

Condition: new, machine/vehicle number: 10463, The AR series are low-speed rotors. They are available with 2, 4, 6 or 8 worm shafts. The machines are designed so that each screw unit is independent and mounted separately in the chassis. Godpfx Ajghgipjaysuk Screw shredders are designed for shredding friable materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to interfering materials such as glass, iron parts, stones, etc. The AR series is ideally suited for use as a bale breaker for e.g. PET bottle bales.

Condition: new, The ZSH chipper series is specially designed for forestry, horticultural and municipal operations. Mainly these chippers are used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. Gsdpfsghgi Eox Aayjuk The wood chips produced are suitable for combustion in wood chip heating systems with screw conveyors or also as a preliminary stage in pellet production. The machines are robust, reliable, easy to operate, powerful and produce wood chips of consistent quality and size. Other Low-cost solution for the production of wood chips l Compact design l User-friendly l Low energy consumption

Condition: used, machine/vehicle number: 9394, Year of manufacture: 2015 Technical data: Gsdpoghgpgofx Aayjuk Main dimensions length/height/width 1430/1730/780 mm Discharge opening diameter 102 mm Number of knives and blades 3+1+9 Drive: 22 kW Total weight of the machine approx. 400 kg Possible sieve holes Ø 4-25 mm

Condition: used, machine/vehicle number: 12195, Inlet: 600 x 600 mm Godpfx Aajhvkdfjyjuk Drive: 2 x 37 kW