Dowel Boring machine with 21 spindles, 2 hold-down devices, 2 stops at 1.6m for line drilling, 2 side stops, over 100 various drill bits, hinge module and other spare parts. Machine has been serviced and is in a good working condition. Please get in touch for more information.
N0ojre3
as good as new (ex-display)
Machine is in perfect working condition.
Purpose of sell is that we are about to buy CNC
Bskwkdom
Pankoke & Kochsiek drawer drill, vertical multi-spindle automat, notching.
Bxfq3rtfad
Technical data:
Number of spindles: 27
Distance between first and last drill bit: 832 mm
Distance between centers of individual spindles: 32 mm
Bxihermlfq
Drilling depth adjustment: 0-80 mm
Number of pneumatic clamps: 3
Working pressure: 6 - 8 bar
Quick-connect drills
Rotating the headstock pneumatically
Engine power: 1.8 kW
Producer: Vitap
Overall dimensions
Length: 1260 mm
Width: 930 mm
Height: 1330 mm
MULTI-SPINDLE DRILLING MACHINE SCM
27 spindles
left/right spindles
spindle distance 32mm
drilling vertically or horizontally at an angle of 45
3 pneumatic clamps
Machine connectors included
machine tested
Pjb0d
very good condition
380V power supply
CATALOG NUMBER M0261
TECHNICAL DATA
Bagtkzfeyj
number of spindles 21
distance between the first and last drill 640mm
the distance between centers of individual spindles 32mm
max. workpiece size 50 x 915 x 3000mm
max. drilling depth 65mm
number of pneumatic clamps 2
height of the working table of the 860mm drill
max. height of the clamps over the table 70mm
working pressure 6-7bar
air consumption 10l / cycle
engine power 1.5kW
noise level 76.1dB
revolutions 2800 / min
dimensions dł / szer / wys...
Code: 0013
Brand: VITAP
Model: ALFA 21
Multi spindle boring machine with 21 spindles
Technical data:
N° 21 spindles with threaded connection
Bvzksxumgp
Center distance between spindles mm 32
Max drilling depth mm 80
Table size mm 860 x 500
Max workpiece size mm 800 x 3000 - Motor Hp 2,5
Overall dimensions: mm 950 x 800 x 1140 h - Weight kg 300
Multi-spindle drilling machine Maggi Boring System 21
Drilling vertically - horizontally - at an angle
21 spindles
Ezcbnfz
Distance between spindles 32mm
Maximum drilling depth 65mm
2 pneumatic clamps
Motor 1.5kw
2800 rpm
Weight about 280kg
CE certificate
Good working condition.
Cimclqqno
Can arrange transport.
Multi spindle drilling machine
with tiltable drilling beam
1 drilling beam tiltable with 19 drills in 32 mm distance
Bvkiidvc3b
drilling beam width 600 mm
throughfeed width max. 700 mm
drill lift 140 mm
2 pneumatic hold downs from top
with fences
tiling movement supported by gas pressure spring
operation by foot switch
including some drills
AUTOMATIC BORING machine SCM TOP 21
second hand machine
working conditions : Excellent
n.21 spindles
motor power Hp 2,5 ( Kw 1,8)
titltable head by electric movement
Bvfvalxqf9
vertical or horizontal boring
volt. 380/50
CATALOG NUMBER M0252
PRODUCT FEATURES
The main features of the machine:
- Single-head drilling machine for drilling in the range of 0 - 90 °
- Pivoting angle of the head adjusted pneumatically
- Possibility to set lateral supports with an accuracy of 0.1 mm
- Safety holders allow quick adjustment of panels without adjustment
- Spindles adapted for quick couplers
- Patented pneumatic clamps of the material
- MDF work table
- Quick and accurate adjustment
- Precise drilling
- Italian production
...
Code: 0345
Brand: MAGGI
Model: BORING SYSTEM 21 - CE Standard
Automatic multiple boring machine with 21 spindles for furniture, kitchens, bathroom furniture, cupboards, custom-made furnishings - CE standard - MOTOR V. 220 SINGLE-PHASE
Complete with graduated rule with 4 positionable stops
N° 21 spindles with quick coupling
Centre distance between spindles mm 32
Table dimension mm 870 x 365
Max. dimensions of the workpiece mm 800 x 3000
Centre distance between first and last drill mm 640
S...
Brand: Ayen
Model: SKB 50
Machine no: 8211894
Adjustable vertical to horisontal with pneumatic.
Drill box swivel with spindles on 2 sides, which means quick adjustment between different drill sets.
Tec. info:
Pcw9p
Number of spindles: 50
cc: 32 mm
Distance cc between first and last spindle: 770 mm
Turnable drillbox
Working table width: 1135 mm
Motor: 2,2 kW, 50 Hz, 3-fas
Air consumption: 4,6 L/T
Weight: 560 kg
Stock no: 2000476
# 1299, drill automat with magazine, 3 piece drill motors with each 2 2 spindles and 25 mm grid, milling motor for floor groove and chain drive after general repairs and new electric and new pneumatic
Ee7ta303w
EXPERT CNC 100 GT
It is a high-performance automatic drilling center for furniture components. The machine is dedicated especially for large production in small batches.
Bn3lz2yce7
MAIN ADVANTAGES:
• High performance and flexibility.
• Time to move the heads and work tables is practically zero.
• The open system guarantees flexible cooperation with the client's software.
• 8 automatic processing heads equipped with 124 independent spindles to meet all production needs.
SPECIFICATION:
Element ...
CUTTING and BORING machine type BALESTRINI IF . automatic
second hand machine
automatically cuts and bores all type of parts of chairs and furniture components .
composed by :
- circular saw diam.mm.400
motor power hp 3
- boring unit ( boring head with 5 mandrins )
motor power Hp 3
3huudizad
max. working stroke of boring unit mm. 700
net weight kgs.500
volt. 380 / 50
CATALOG NO. S0337
PRODUCT FEATURES
Drilling machine high-precision drilling.
It has a stable work table made of cast iron.
Pneumatic head tilting angle in the range from 90 ° to 0 °.
Stable crosscut side and pneumatic clamps.
2 scales przykładnicy 1500 mm each with two stops
Variable speed drilling
ADVANTAGES
- drilling horizontal / vertical / angle
- Multi-
machine - new
- CE certificate
- robust
- professional
TECHNICAL DATA
worktable dimensions
880x425mm
number of spindles 21
sp...
Max/min panel dimensions X-Y-Z : 3050x900x60 / 200x80x10 mm
Drilling/grooving working area : 40/40/10 m/min
Vertical spindles : 8 ( 5X - 3Y)
Horizontal spindles : 6 (2+2X-2Y)
Blade, diameter/thickness : 125/6 mm
Bwi2o3ajjx
Spindles/blade rotating speed : 4200/5500 rpm
Electrospindle rorating speed : 18000 rpm
Power : 20,7kW (with router).
-ON STOCK-
Brand: Morbidelli
Model: UNIKA 29
Machine no: AN1/000030
Bubkff2uyd
Tec. info:
29 spindles with cc 32 mm
Max boring depth: 70 mm
Distance cc between first and last spindle: 896 mm
Worktable width: 1315 mm
Motor: 2-6 kW, 50 Hz, 380 V, 3-phase
Stock no: 2000422
Multi-spindle groin drilling machine
Number of drilling spindles, clamping devices, etc. depending on customer requirements
spindles can be controlled individually at your speed.
We will be happy to provide you with an offer tailored to your requirements.
D92px7
NEXT series drilling machines are intended for companies expecting high efficiency. It takes approximately 5 seconds to drill to completion, which significantly accelerates the production process. The machine is equipped with 2 horizontal aggregates (left and right), 4 vertical aggregates and 4 rear aggregates. The machine has a wide possibility of personalization.
TECHNICAL SPECIFICATION:
Horizontal units: 2 x 1.5 kW
Vertical units: 4 x 1.5 kW
Rear servo units: 4 x 1.5 kW
Guiding of the heads: ...
BORING machine with 21 spindles type MORBIDELLI M 21
second hand
electric movement of boring head 0° / 90°
with serie of tools
technical data:
Bi7sccmxjn
n.21 spindles
Center distance between spindles mm 32
Center distance between first/last spindle of the drill head mm.640
Max. stroke of boring unit mm. 140
motor Hp 2,5
Operating pressure atm 6-8
Weight kg.600
volt. 380/50
Catalog number S0337
- new machine, in stock
- warranty, CE certificate
- dimensions of the working table 880 x 425 mm
- number of spindles 21
- spacing between spindles 32 mm
- distance between the first and last spindle 640 mm
- spindle revolutions, rpm 2850 rpm
- engine power 1.1 (1.5) kW (HP)
- max. pressure 6 bar
Dimensions without guide:
- length 1320 mm
- height 1220 mm
- 1400 mm width without parallel guide
- required area 3500 x 3500 mm
- weight 275 kg
Bknxgvi3iu
* Multi-spindle drilli...
29 spindles
C0pavix
left/right spindles
spindles span 32mm
vertical or horizontal drilling
pneumatic setting of drilling beam
pneumatic clamps
pedal control
Machine type Bohrmatic, in good condition, inspected at the workshop, semi-automatic, with air pressure cylinder for holding item, number of motors 3, drills vertically, drills horizontally, number of drill heads 3, number of drill spindles 3x21. with quickly chuck
Yuywa0wnw
Rilesa Model: Omnia 2200
Thickness: 10 - 40 mm.
Width: 20 - 250 mm.
Length: 160 - 2200 mm.
Capacity :
without cross drilling: Up to 20 pc./ min.
Capacity :
with cross drilling Up to 18 pc./ min.
Capacity :
Drilling from back Up to 16 pc./ min.
Design/ constructions:
The machine is built on at a strong standard frame of closed pipe sections where pneumatic tubes and electric wires are run. Working up parts, which have importance for precision, has been planned with a router.
...
Number of spindles 21
Spindle speed 2800 rpm at 50 Hz
The distance between the spindles 32 mm
Btqlsle2lp
The distance between the extreme spindles 640 mm
Max. drilling depth 65 mm
Max. workpiece thickness 70 mm
Motor power 2 hp (1.5 kW)
Net weight 250 kg
I sell the multiple boring machine Detel M-29, year 2006.
Vtrvy3
Available immediately.
CATALOG NUMBER 6059
TECHNICAL DATA
- number of horizontal spindles 2 × 20 pieces
- number of vertical spindles 1 × 20 pieces
- spacing of extreme spindles 610mm
- spacing between spindles 32mm
- stroke of the feed cylinder 60mm
- max. length of the workpiece: 3400 mm
- adjustment of horizontal spindles up / down, front / back
- right / left adjustment of vertical spindles
- possibility of working on each drilling apparatus separately
C3wwixis
- right drill - left, threaded (screwed)
- 3 pneumat...
3 drilling sections - 1 horizontal (right side) and 2 vertical (from the bottom)
Bvbqndsjrb
2 drilling units in each section
the possibility of any disconnection of each section / unit
2 vertical clamps
Comec drill crosscut saw
Bjauqnpu
FIMOV 2000 2UT 4UF CA2
Boring machine GRIGGIO G 65 / 5T
Produces really high quality production. Well maintained.
Bkjrvalxy
All the units of the machine are in good working condition. There are no loose parts or irregular noises. Machine produces high quality and good looking production.
Machine is ready to be loaded.
Machine was used in warm and dry warehouse.
Equipment:
- 2 vertical units, with separate motors having 21 spindle
- 1 horizontal unit with 21 spindle
- 3 m aluminum ruler with 5 pneumatic clamps
- mec...
MULTI SPRING DRILLER zangheri made in Italy
29 spindles
C2y3o28o
left/right spindles
spindle distance 32mm
drilling vertically or horizontally
3 pneumatic clamps
Connectors and drill bits visible on the machine are included
machine checked, ready to work, powerful drill
380V power supply
29 spindles
max material width 1300mm
left/right spindles
spindles span 32mm
electric regulation of drillinig unit
setter of drilling depth
4 pneumatic clamps
O38jp
two motors 2,2kW
pneumatic movement of drilling unit
CATALOG NUMBER 6059
TECHNICAL DATA
- number of horizontal spindles 2 × 20 pieces
- number of vertical spindles 1 × 20 pieces
- spacing of extreme spindles 610mm
- spacing between spindles 32mm
- stroke of the feed cylinder 60mm
- max. length of the workpiece: 3400 mm
- adjustment of horizontal spindles up / down, front / back
- right / left adjustment of vertical spindles
- possibility of working on each drilling apparatus separately
- right drill - left, threaded (screwed)
- 3 pneumatic clamps...
Machine prepared for the fixing of the vertical boring groups from the bottom
- Plc and Touch screen for the diagnostic and the machine cycles .
- Working table of 2800 mms.
- Nr. 2 horizontal boring heads with 21 spindles each prepared for quick chucks;
- Nr. 2 motors of HP 2 (kw 1,5 ) each;
- The right one is movable with the possibility to pass over the vertical boring groups
and fitted on prismatic guide with ball bushes and electronic digital indicator;
- Work...
CNC vertical drilling center for processing wooden boards. The BH17 working unit consists of 10 independent vertical drilling spindles, 6 horizontal drilling spindles and
from one grooving unit equipped with a saw.
Application in industry and crafts - carpentry workshops, furniture production, etc.
Manufacturer / Brand: BIESSE S.p.A. Italy.
Technical parameters:
Own weight (kg): 1300;
Btw7tlzymh
Air pressure (bar): 7;
Total power (kW): 10;
Power supply: 380V 3 ~ 50Hz;
Minimum dimensio...
Number of spindles 21 pcs
Spindle distance 32 mm
Motor 2 HP (1.5 Kw)
Pneumatic tilt unit with the push of a button.
Btz0r8brie
SCM model B17 multi-spindle drilling machine
- vertical and horizontal drilling
Havrop
- 17 drill bits every 32 mm
- 2 pneumatic clamps
29 spindles
max material width 1680mm
Btgeex0030
left/right spindles
spindles span 32mm
electric regulation drilling unit
drilling depth setter
4 pneumatic clapms
two motors 2,2kW
pneumatic movement of drilling head
CATALOG NUMBER 6059
TECHNICAL DATA
- number of horizontal spindles 2 × 20 pieces
- number of vertical spindles 1 × 20 pieces
- spacing of extreme spindles 610mm
- spacing between spindles 32mm
- stroke of the feed cylinder 60mm
- max. length of the workpiece: 3400 mm
- adjustment of horizontal spindles up / down, front / back
- right / left adjustment of vertical spindles
- possibility of working on each drilling apparatus separately
Enbz3msl0
- right drill - left, threaded (screwed)
- 3 pneuma...
Equipped with :
- One boring unit 21 spindles;
- QUICK CHANGE SPINDLES;
- Pneumatic cylinder for horizontal/vertical positioning of the boring group
(45 degreed and any intermediate angles);
- Front/top caliper to obtain the same boring measure between horizontal and vertical
position;
- Tilting side stops adjustable by metric scale and nonius and magnifying lens on each
stop;
- 2 safety clamps inclined 4 degrees;
- Height regulation of th...
SECOND-HAND ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO - CE RULES
Bg0vyyfclz
Type: MZ73031A
Number of spindles 3
Distance between first and last spindle 50 mm
Adjustable drilling speed
D2gspt7
Height of the working table 820 mm
Table dimensions 735×440 mm
Number of clamps 2
Motor power 1,5 kW 400 V
Motor r.p.m. 2800 r.p.m
Working air pressure 6-8 bar
Weight 75 kg
Transporting dimensions 900x700x1500 mm
The machine is equipped with 3 drilling units (2 upper, 1 lower) and two milling units (1 upper, 1 lower). The machine has the ability to drill 2 elements at the same time (mirror reflection). All heads can work simultaneously, which allows you to significantly reduce processing time.
On request, it is possible to calculate the duration of processing a given element.
TECHNICAL SPECIFICATION:
Minimum workpiece length (X): 250 mm
Maximum piece length (X): 3000 mm
Minimum element width (Y): 50 mm
M...
29 spindles
left/right spindles
spindles span 32mm
horizontal or vertical drilling
setting of depth of drilling
Cisu3xd
pneumtatic movement of drilling head
