Used mounting technology for sale (151)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours Hodpszlx E Tofx Al Tsnp MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Year of construction: 2006, condition: good (used), functionality: fully functional, Machine width: approx. 1.90 m with track/transport path approx. 1.25 m without track/transport path Machine depth: approx. 1.35 m incl. main switch approx. 1.20 m without main switch Machine height: approx. 2.00 m with superstructures/signal light approx. 1.50 m without superstructures Hnsdjzl R R Iepfx Al Top Note: The dimensions are measured manually and may differ from official manufacturer specifications. 2. Work area / component placement area Work area in the component placement area: approx. 600 × 600 mm Note: This is the measured mechanical area in the machine room or in the component placement area. The maximum processable printed circuit board size may differ from this and must be confirmed separately via machine data and software settings.

Year of construction: 2014, condition: used, curb weight 2.500 kg Max. load weight 2.500 kg Hedpszkbp Sofx Al Tjnp total wight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - 1x Quick-Point mounting plate for the machine - 20x centering vises (77mm steel version) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2017, condition: ready for operation (used), Offered for sale is a Mycronic SMT placement machine. Max. placement capacity: 16000components/h, IPC net throughput: 13800components/h, placement system: HYDRA, placement tools: 8, max. component dimensions X/Y/Z: 56mm/56mm/15mm, max. component weight: 140g, min. PCB size X/Y: 70mm/50mm, max. PCB size with T3 X/Y: 443mm/508mm, min./max. PCB thickness: 0.4mm/6mm, max. PCB weight with T3: 5kg, feeder capacity with T3: 112 × 8mm feeder positions, conveyor height range: 880mm-975mm, operating hours: approx. 6871h, placement time: approx. 2983h. Machine dimensions X/Y/Z: approx. 2690mm/2229mm/1446mm, weight: approx. 1400kg. Inspection possible by appointment. Hnedpfx Ajzl U Nnjl Top

Condition: good (used), Year of construction: 2018, Asys TRM 03 Conveyor Belt Hsdpfx Aozivt Njl Tjnp Work table With excavation station With lighting

Condition: good (used), Year of construction: 2017, Asys LSB 03 inline loader (bareboard loader) Year of manufacture: 2017 Good condition SMEMA interface Hodpozivq Isfx Al Tenp

Condition: new, 1 lot Eaton distribution cabinet and accessories Hsdpfx Aow U Suhsl Tsnp - CI48-200 78896 32 pieces - CI43-150 95506 17 pieces - IM4-CI48 093200 4 pieces - FL4-4 19609 8 pieces - 3 pallets, shipping possible at extra cost

Year of construction: 2004, condition: used, functionality: unexamined, ASYS Rommel PCB Transport System – Items 1x LAG 55 WA Magazine Loader 2x TRM 01-S (1x OK, 1x spare part) 1x LAG 55 WA 470 Magazine Loader 1x LBE 55 WA 470 Magazine Unloader 2x FPS 30 Transport and Buffer Module - All devices are untested; however, where a power connector was present, at least the display was switched on and booted. Hedpezktx Eefx Al Tenp - For an additional charge, we can arrange shipping or assist with it.

Condition: new, functionality: fully functional, machine/vehicle number: 005119, Year of construction: 2016, Equipment: documentation/manual, Swivel arm – spare part – König Loader KA SL260 Complete new threaded spindle 25x25 KA-SL V4 with mounting parts for a loader/loading system for the lifting movement of the swivel arm – automation of the production machine (e.g. Reishauer) Koenig Automation AG – Switzerland, article 005119 New and unused, with assembly instructions – procured as a spare part for a swivel arm loader/loading system – automated loading system for a Reishauer RZ 260. Price negotiable. Our asking price is €790 net ex works, plus packaging costs. Hnodpjx Tqhljfx Al Tep 1 set of Y-axis guides, new, unused – our asking price is €395 net ex works, plus packaging costs. All technical specifications are subject to typographical errors/mistakes. We only sell to countries within the European Union.

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Hedpfxsw U Dpqj Al Tsnp Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder 1x 8/12mm 8-lane feeder

Year of construction: 2005, condition: ready for operation (used), A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible. Hnedpfx Ajzka I Hsl Tep

Year of construction: 2011, condition: good (used), For sale is our Asys ARS 01 conveyor belt (with scanner). Condition: very good. ARS 01 Year of manufacture: 2011 Serial number: 040354. Hnodpfozlxc Ssx Al Tep

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Hodpfxey R Dc Dj Al Tonp Ask for additional information!

Year of construction: 2017, condition: ready for operation (used), A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible. Hjdpfszidkvjx Al Tjnp

Condition: used, Year of construction: 2023, functionality: fully functional, Good maintenance history and working conditon! Hedpfx Alszkr N Aj Tsnp Ask for specification and pricing!

Condition: good (used), functionality: fully functional, For sale is a high-quality FELSOMAT FlexBox for automated workpiece handling in serial production. The system is designed for the automatic loading and unloading of CNC turning, milling, grinding, or gear cutting machines. It features servo-driven handling with a pneumatic gripper and an additional linear transfer axis, enabling the implementation of multiple processing stations or larger travel distances. The system comes from an industrial production environment and is ideally suited for special machine builders, automation specialists, or as a basis for retrofit projects. Equipment: FELSOMAT FlexBox Fully enclosed safety enclosure Automatic linear handling Servo-driven axes Pneumatic workpiece gripper Additional linear transfer axis Workpiece storage Control panel Safety monitoring Control cabinet integrated Hnedpfx Alszivaps Tjp Extraction connection Completely wired Typical applications: CNC turning machines CNC machining centers Grinding machines Gear cutting machines Measuring stations Assembly automation Manufacturing cells Technical data (typical) Feature Specification Manufacturer FELSOMAT Model FlexBox Design Automation cell Axes Servo linear system Gripper pneumatic Workpiece handling automatic Voltage supply 400 V Safety cabin present Additional axis Linear transfer Scope of supply FELSOMAT FlexBox Servo handling Linear transfer axis Gripper system Control panel Control cabinet Safety cabin Condition The system is in good optical condition. The handling system, linear axis, and safety devices are all fully functional. The machine is being sold due to the closure of the operating facility. An inspection can be arranged at any time by appointment.

Condition: used, Year of construction: 2017, functionality: fully functional, Working condition. Hnsdpjzkg D Iofx Al Top Ask for additional information!

Year of construction: 1998, condition: ready for operation (used), A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible. Hodpfx Aozhw Thjl Tjnp

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available Hnjdpfx Alozhwvpe Top We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Hnjdpfoxuh Ddsx Al Tjp

Year of construction: 2006, condition: good (used), For sale is our Teradyne Spectrum 9. Type: TSE 8862 Year of manufacture: 2006 Condition: fully functional (without monitor and keyboard) Equipment: 1 FIB/DeltaScan board 1 VP board 1 VP Expander board 1 VXI-MXI-2 1 High voltage PRISM board Hedpfxszh Txte Al Tsnp 10 CC2a master and expander boards Maintenance documentation and CE declaration available.

Year of construction: 2010, condition: good (used), Our Asys buffer system is for sale. Type: FPS 30 B Hnodpfx Ajyylqzsl Top Year of manufacture: 2008 Condition: good Available immediately

Condition: good (used), 2 pieces available unit price !!! various accessories Hnjdpfx Aljq I Sf Uo Top

Year of construction: 2008, condition: good (used), Our Rommel Scanstation is available for sale. Model: WL 1000 ID-X Year: 2008 Condition: good Immediately available Hnedpoyyk T Ujfx Al Tsp

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, A gantry system for automated loading or transport of heavy parts is for sale. This gantry system can be used for various loading applications (milling machines, lathes, paint lines, welding units, etc.). X travel – 11.6 meters, Y travel – 2.38 meters, Z travel – 2.5 meters. All axes are driven by SEW servo motors. Hnodpjwdnb Dsfx Al Top Servo-driven single gripper for parts up to 500 kg. Control cabinet – PLC control – Siemens S7-1500 and SEW drives. The gantry system can be inspected by appointment in Overath.