Mitre saw with Beck ES-F3

Graule ZS 170 N

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Radial arm saw graule ZS 170N Fpjdpsz Nk Eljfx Aivjn For cutting ALU,PVC and wood -cross-cut and mitre circular saws for straight cross-cuts and mitre cuts left and right -stable grey cast iron construction -precise ball bearing guide of the tool slide on hardened and ground steel shafts -manual saw feed fast mitre adjustment up to 25° -readjustable fixed stops at 90° and 45° -lower saw blade protection can be connected to extraction system Motor : 400 V / 3.0 kW Lenght of cut: 410 mm Depth of cut : 170 mm Sawblade diameter : 420 mm The saw is equiped with pneumatical clamping, lubricating unit adn hydraulic saw feed brake. Machine is ready for operation saw blade sharpened. We can ship the machine to your address via shipping company DSV ( On demand)

Condition: new, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 004P023-RF-A2 Fodof Ddzqepfx Aivspn 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1, 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2- M929 M1256 664P118-056-017-R-A2- M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF and other types, as one package

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above Fpjdpfx Aioxabztevjn consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Fpodpfezu Azdex Aivon Crosscut fence for cutting angled pieces Machine stand

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Fpodpjdy Hm Dofx Aivjn Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Fjdpfx Aieu R Sypjvjpn Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: used, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Horizontal miter angle range: 45°-90°-25° Vertical miter angle range: 60° - 90° - 30° Swivel adjustment with crank: yes Roller conveyor / support table: no Fpedoiixxnspfx Aivsn Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Dust extraction port: 100mm Machine length: Machine width: Weight: 110 kg

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level. Fpedpfxsh Ek Dae Aiven

Condition: new, Year of construction: 2024, machine/vehicle number: 2024/121/47, functionality: fully functional, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Fedpfotwz Tljx Aivjpn Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Fsdpfx Aovwf Rdsivopn

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm Fpsdpfeiu Smbex Aivjn distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motorTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Fpsdpfx Aisvwf N Tevjn

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade bore: 40 mm, Equipment: documentation/manual, scrap and mitre circular saws Model: ZS 170N Motor: 400 V / 2.0 kW Speed: 3500 rpm Cutting length: 410 mm (at 90°) Cutting height: 170 mm (at 90°) Mitre range horizontal: 45°-90°-25° Fpsdpoypwhpsfx Aivsn Mitre range vertical: 90°-45° (left) Saw blade diameter: 420 mm Extraction nozzle: 100 mm Weight: 120 kg

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Closing force: 250 tons Year of manufacture: 1987 Fodpfxsfp U Hvo Aivopn Injection weight: 470 g Tie bar spacing: 63 x 56