Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm Dolikjwc Nvgsz N Tsut The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1 h, Functionality: fully functional, machine/vehicle number: 43051, warranty duration: 10 months, type of input current: AC, input voltage: 230 V, measuring range X-axis: 65 mm, measuring range Y-axis: 55 mm, V-CAD 60 2D Optical Measuring Device - Dr. Schneider Messtechnik Special Price: €6,900 This device was purchased for a project in June 2024 and is now available for sale. It is completely new and is stored in its own secure storage room. Special Price - Pick up on-site in 56133 Fachbach. Manufacturer's warranty until May 2025! Precision sapphire glass support for positioning the measuring objects. Measuring range: 65.5 x 55 Glass surface: 85 x 70 mm Support surface: 200 x 130 mm Workpiece weight: max. 5 kg Telecentric diode transmitted light illumination Switchable LED incident light illumination Measurement and evaluation software "SAPHIR QD" Windows-based user interface MMi = Multiple identical measurements MMd = Multiple different measurements Learning programming Graphical display CAD file Calculations / evaluations Reports / output / interface Digitization and BestFit 2D version Language for documents and software: German Voltage 220 V 5810000320 High-resolution camera 5 megapixels 3160003770 4-stage Zoom lens 5910000265 Microsoft Windows 10 IoT Enterprise 2019 5810000398 All-in-one PC, pre-installed and ready for use including measurement software Duolikz Nsuggi Is Tet Intuitive measurement made easy You've never achieved your measurement results so quickly and easily. Choose the single-field system of the V-CAD 60 (this covers a measuring range of up to 65 x 55 mm, without any table movement) or the larger version with a moving table (V-CAD 300), which offers a measuring volume of up to 300 x 200 mm and can also be used in fully automatic CNC operation. A wide variety of options for your 2D measurements are available. Decades of experience in building high-precision multi-sensor measuring machines have been incorporated into the development and construction of the V-CAD series. You can rely on it – Made by Schneider Messtechnik – Made in Germany – SIMPLY PRECISE!

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: GLOD001468IA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 1,000 mm, warranty duration: 12 months, total height: 35,130 mm, total width: 18,980 mm, total length: 29,050 mm, overall weight: 2,868 kg, input voltage: 24 V, A rare opportunity to acquire an almost brand new, Hexagon Global Lite12-15-10mm. With a 1200mm x 1500mm x 1000mm measuring range. This machine is a 2024 model year and presented in immaculate condition. It comes with a Tip Changer rack, 5 degree Hexagon Probehead and with both tactile and the X1 scanning probe. Powered by the powerful DC800 controller and with the running the latest version of CAD++ this machine is one not to be missed. Includes 12 months warranty but is only available to the UK. Please not the price quoted only allows for Euro or Dollars but we only accept GBP £84,995.00+vat Dujlikzeqxtaxe N Tjt

Condition: reconditioned (used), Year of construction: 2025, operating hours: 20 h, Functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, 3D coordinate measuring machine Mahr MS2VT used multi-sensor CMM with motor zoom and active vibration damping Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Dolijdz Er Rjkz N Teut • Measuring range single sensor: 200x200x200mm • Dimensions: 900x750x950mm Bcym337udm • Weight: about 170kg • Accuracy: E2 = 2.4 + L/150 [?m] • Refurbished 2024 • incl. USB camera with fixed focal length • incl. LED ring light • including calibration standard • incl. 2-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 ​​evaluation software (12 months free SW update) Manufacturer's icon image (sister device)

Condition: excellent (used), Functionality: fully functional, Agilent Technologies Inc. Exerciser Module, N5344A Model: N5344A Condition: Used Deljwifkyoikz N Tout Specifications: RDX General: Transparently monitors DigRF v4 bus activity Compatible with: N5345A High-Performance Soft Probe N5346A High-Performance Flying Lead Probe Supports DigRF v4 bus specifications Supports speeds up to 3 Gb/s, with single or multi-lane configuration Full protocol decoding capabilities

Condition: used, Functionality: fully functional, In this offer you purchase a used mobile coordinate measuring system ‘Keyence WM-3500’ Object of sale: 1 x Keyence WM-3500 with the following equipment: incl. camera tripod incl. laptop with measuring software incl. WM-B1 measurement battery incl. battery charger WM-BC1 incl. transport case Condition: This is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Dusljv Id Uvjikz N Tet For further information you can of course contact us personally.

Condition: excellent (used), Zwick Roell Type: Z100 TEW Technical Data Dsliswcqrpokz N Tjut Item No.: 1004501 Test force Fmax: 100 kN Test Chamber Test chamber height: Total height: 1934 mm Height of lower test chamber, without fixtures: 1755 mm Height of upper test chamber, without fixtures (additional crosshead required): 1800 mm Test chamber width: 640 mm Load frame Load frame height: Height without support profiles: 2169 mm Height with support profiles: 2284 ... 3094 mm Load frame width: Width without support profiles: 960 mm Width with support profiles: 1136 mm Width with support profiles and machine electronics: 1329 mm Load frame depth: Depth: 140 mm Depth without Stand profiles, with drive base: 584 mm Depth with stand profiles: 781 mm Weight: with machine electronics without stand profiles, approx.: 470 kg optional stand profiles (one pair), approx.: 34 kg with typical fixtures, approx.: 570 kg Installation area: pure footprint: 0.01 m2 Load frame footprint: 0.867 m2 Specific floor load: based on typical fixtures: 559 kN/m2 with 50% safety: 839 kN/m2 Ceiling load: based on typical fixtures: 6 kN/m2 with 50% safety: 9 kN/m2 Paint finish: RAL 7021 and RAL 7038 Ambient temperature: +10 ... +35 °C Relative humidity (non-condensing): 20 ... 90% Average sound pressure level At vmax measured at a distance of 1 m from the front of the machine: 66 dB(A) Drive Crosshead speed vmin ... vmax 0.0001 ... 1500 mm/min Crosshead return speed, max.: 2500 mm/min Deviation from the set drive speed, max.: 0.05% of vact Drive travel resolution: 0.484471 nm Positioning repeatability (without direction reversal): ±2.0 μm Controller: adaptive Remote control testControl II Safety device Force transducer 100 kN Type: Xforce K Hydraulic power unit Height: 584 mm Width: 502 mm Depth: 817 mm Hydraulic specimen holder Max. test force (Fmax): 70 kN Max. clamping force (at 300 bar): 110 kN The hydraulic specimen grips are designed for tensile, compression, and alternating load tests (static, tensile, pulsating) and are suitable for the following applications: Application Area - Specimen Material: Ferrous and non-ferrous metals, structural sheets, sintered metal materials, hard metals, metal-ceramic composites, hard and reinforced plastics, composite materials, similar materials - Specimen Shape: Flat specimens, round specimens (strips and shoulder specimens), especially small specimens with short clamping lengths - Loading Type: Tensile, compression, alternating load MakroXtens Extensometer Drag Force: ≤ 0.05 N Clamping Force of the Sensor, Manually Adjustable: 0.1 ... 2 N Resolution in conjunction with: 300 mm lever arm length: 0.006 μm 450 mm lever arm length: 0.009 μm 600 mm lever arm length: 0.012 μm Maximum initial gauge length: up to 100 mm Maximum sample width: 60 mm Maximum sample thickness/diameter: 30 mm Dimensions: Height: 375 mm Width: 167 mm Depth: 375 mm Test software: testXpert 3 v1.2 Year of manufacture: 2018 Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: 133114, 1000L climate chamber Delikzewif N Nj N Teut Temperature range -70°C to +180°C Humidity control 10-98%

Year of construction: 2025, Condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. Duslikz Njd R Dpme Tet This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Djlsdyah Soikz N Tsut Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, Functionality: fully functional, Rohde & Schwarz Universal Protocol Tester, 1138 4000 82, CRTU RU Model: 1138400082 Type: CRTURU Condition: Used Dujlikzewifhfs N Tet

Condition: excellent (used), Year of construction: 2020, We don't get to use it in production, therefore the sale. Duolorq A Sxsikz N Tjt

Condition: excellent (used), Vötsch Type: VC 7034 Climatic Test Chamber with Humidity and Air-Cooled Touch Panel Powerful 32-bit Control, Monitoring, and Regulation System Technical Description: Characteristics for Temperature Tests: Temperature Range -70°C to +180°C Temperature Deviation in Steady State according to IEC 60068-3-5, depending on the test chamber temperature temporally ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature Rate of Change according to IEC 60068-3-5 Heating: approx. 3 K/min. Cooling: approx. 2 K/min. Heat compensation max. approx. 1000W Characteristics for climatic tests: Temperature range +10°C to +95°C Temperature deviation in steady state according to IEC 60068-3-5 depending on the test room temperature temporally ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Distance between measuring points and wall: 100 mm Humidity range 10% to 98% RH Duolijwck Dlskz N Tet Dew point range -3°C to +94°C Humidity deviation in steady state, depending on the climatic value temporally ±1.0% RH to ±3.0% RH Heat compensation 400W at 25°C to 90°C Humidity up to max. 90% RH F. is maintained Data for installation and operation: Test chamber: Width 580 mm, Depth 765 mm, Height 750 mm Housing (installation dimensions): Width 865 mm, Depth 1595 mm, Height 1780 mm Penetrations 1 50 mm diameter penetration installed on the left 1 125 mm diameter penetration installed on the right Test chamber volume: approx. 335 liters Refrigerant R-452a + R23 Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 5.9 kW Nominal current approx. 12.0 A (neutral conductor loaded) Fuse protection 16 A slow-blow, on-site Weight approx. 500 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2017, Condition: good (used), Functionality: fully functional, machine/vehicle number: 173054, A used climate cabinet from CTS is for sale. Duslikz Njvrffqj Tst Inspection and test run possible in advance.

Year of construction: 2025, Condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Doliked R Dp Eez N Tsut Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe Dslodyc Uajikz N Teut · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 589-8106C, Equipment: type plate available, 1 used Leitz coordinate measuring machine, complete, including measuring table, control PC, various mounts and probes, without transport locks!! The system is located in the measuring room of a development laboratory. Temperature 20.8 +-0.1°C. It is connected and running, but is no longer in use. Delivery date approximately 6 weeks, after clarification. The buyer can remove the upper section to reduce the height. (Leitz service recommended!) The buyer must organize transport and provide transport locks. Machine weight approx. 6,700 kg, L x W/W x H: 2395 mm x 2013 mm x 3026 mm ----- Please state your offer price. Sale only within the EU, Switzerland, Turkey, and the United Kingdom ----- For technical data, see handout. Duslowihfmoikz N Tst Without packaging; any warranty claims are excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical specifications, the completeness of accessories and tools, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Dslikz Nsvb E Uqo Tout Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2024, Condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm working chamber depth: 66 mm total height: 1036 mm Weight: approx.48 Kg travel resolution: 0,01 mm Duolikz Nsd R Dqbs Tot test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: refurbished (used), Year of construction: 2015, operating hours: 250 h, In the client's order: Duelikz Nody Hlho Tot 3D coordinate measuring machine Hexagon Optiv 432 used multi-sensor CMM with camera, push button • Measuring range single sensor: 400x300x200mm • Dimensions: 1232x910x1663mm Mufjyo • Weight: about 940kg • Max. Workpiece weight: glass plate approx. 30kg • Accuracy: MPEE = 2.9 + L / 100 [? M] • built in 2014 • Software: Vision3D with option on Opticheck3D • incl. Camera with CNC zoom • incl. 6-fold button changer • Including switching push-buttons HP-TM • incl. LED ring light • incl. Calibration standard • incl. 2-monitor operation • incl. New Windows 7 Ultimate evaluation station • incl. Opticheck3D 4.5 evaluation software (12 months free software update) SYMBOL IMAGE OF THE MANUFACTURER (All rights reserved by Hexagon Metrology)

Year of construction: 2025, Condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Duelikzsd R Dpus N Tst Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, Functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 200 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished Mahr Multiscope 662 (factory acceptance before delivery) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Includes the latest software update für windows 10 (Windows 11 and OptiCheck2025 optionally available) free lifetime software hotline, and user support. Optional delivery with factory service or shipping, worldwide. Online or on-site demonstrations available with customer parts, and application consulting by accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and extensive acceptance documentation. Individual training and educational programs also available as online courses. Rental, hire purchase, or financing directly through Profitech without a financial institution. Measuring device customizable to customer needs. Multisensor measuring device equipped with a camera, laser, and Renishaw probing system. Measuring range for all sensors: 600x600x200mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base) Max. load capacity: Glass plate 40kg Accuracy: U1=2.4 + L/150; U2=3.2 + L/125; U3=3.9 + L/100 (L= measuring length in mm) Max. travel speed: 250mm/s Including 2-step zoom camera Including laser Including LED ring light Including Renishaw TP200 probing system Including frame grabber (Eagle) Including Windows 10 Including new Optichek 3D 5.0 evaluation software Including Renishaw TP200 probing system Dujlikz Nju Dw T Ue Tst During optional commissioning and calibration, the measuring device can be programmed for customer-specific parts so that you can immediately run your measurement programs even before any required training.

Condition: refurbished (used), Year of construction: 2025, operating hours: 30 h, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 240 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 multisensor measuring device equipped with camera and Renishaw probing system Fully operational with factory acceptance prior to delivery! Measuring range: 400x200x200mm Maximum workpiece weight (glass plate): 15KG Measuring device weight: 800KG Control cabinet weight: 90 KG External dimensions: 800x1000x2000mm Maximum travel speed: 150mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L=measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCL. latest software update of OptiCheck3D for Windows 10 (Windows 11 and OptiCheck3D 2025 upgrade optionally available), free lifetime software hotline, and user support. Optional: Delivery with factory service or shipping, worldwide. Optional: On-site commissioning & calibration. Delikodyl Dcjz N Tjut Online or on-site demos with customer parts, application consulting by accredited Profitech measuring laboratories during project planning. Available comprehensive service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and extensive acceptance documentation. Individual training programs, also available as online courses. Rental-lease purchase or financing directly through Profitech without a financial institution possible. Measuring device customizable to customer needs. Reference number: 01814-1-ms400 (Please always quote in inquiries)

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, Functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, table load: 20 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, High-precision optical measuring device with active vibration damping for use close to production. Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! Factory-refurbished premium multisensor measuring center with guarantee and warranty rebuilt 2024. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agent, worldwide. Online - optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: - delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rent-hire purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements Measuring range of individual sensor: 250x200x200mm Measuring range of all sensors: 250x200x200mm Factory overhaul (Mahr Competence Center): 2024 New Windows 10 evaluation station Software: OptiCheck3D Version 4.5 Ultimate Maximum workpiece weight (glass plate): 15kg Scale resolution: 0.1μm Maximum speed: 150mm/s Dimensions: 800x700x1980mm Weight of measuring device: 450kg Weight of control: 90kg Duslikzjdzzqwj N Tst High-precision CMOS camera for digital measurements Renishaw TP20 touch probe system with SF insert module Accuracy according to VDI/VDE 2617 Sheet6, ISO 10360-2: U1=1.9 + L/200; U2=2.4 + L/150 ####Symbolic image of the manufacturer####

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with camera, laser and Renishaw probe system. Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Measuring range of all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: about 800kg max. loading weight: glass plate 30kg Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s including camera Duolijdy Uvmekz N Tst including lasers including LED ring light incl. new frame grabber (Eagle) including 2-monitor operation incl. CNC control and PC including new Optichek 3D 5.0 evaluation software