Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Dsb Esvb Hanjt Efnout Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2018, Functionality: fully functional, - Specially configured automatic contour measuring device - Mahr Surf LD130 base unit with automatic probe change - Height-adjustable frame - X/Y travel table with clamping device available Dob Et Ejwictlsfnout All clamping devices, probes, measuring programs, etc., were specifically procured for a specific product and can be modified with the manufacturer's assistance. Pickup at our Haldensleben location Immediately available

Condition: used, PELI 1400 ja ja Dujb Et Esfc T U Ujfnot +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Scanworks V5 laser scanner with interface to Hexagon Cimcore/Romer measuring arms. We used to operate it with a Romer V7 measuring arm and no longer need it. Scanworks V5.7 64-bit point cloud acquisition software is included. Dujb Et Eswfgpcjfnst Complete package with controller, laser, calibration sphere, cables, certificates, and software. Ideal as a replacement for existing systems to ensure reliability.

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, measuring range X-axis: 3,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 60 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total width: 800 mm, total length: 3,800 mm, repeat accuracy: 0.1 mm, Equipment: documentation/manual, type plate available, Gantry measuring table with 3 axes - manual, demonstration model, fully functional, like new. Manual measurement of width/length/angle of flat workpieces such as wood panels, insulation boards, sheet metal, carcass components, fronts, window elements, and much more. This device is particularly suitable for manual quality assurance in trade and industry. Robust, durable, and precise – ideal for workshops, production, and testing departments. Drilling distances, drilling depths from the side and from above, grooves, recesses, rebate positions, rebate depth, and much more. Dujb Eewhgphjt Efnjt Welded frame - powder-coated - RAL 3001 Vertical base frame, approx. 15° Anodized aluminum component support Extra large measuring range: X-axis measuring / length 0-3000 mm Y-axis measuring / width 0-1500 mm Z-axis measuring / width 0-60 mm Precise profile rail guide with recirculating ball bearing technology. Manual clamping element via lever for each axis. Various measuring tips. Intuitive EasyMeasure operating software with free measuring mode and guided operating sequence. Magnetic incremental displacement measuring system. 10.1-inch touch panel PC. Retractable intermediate level for ergonomic work with small components. Individually activated suction cups for securing components and thus ensuring safe measurements. Vibration-damped feet. Resolution 1/0.1/0.01 mm freely programmable. System accuracy +/- 0.2 mm. Includes factory calibration certificate and 12-month warranty.

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Measuring range: X=500mm, Y=500mm, Z=500mm Length measurement error E0 in µm E0/E40 in µm MPE according to ISO 10360-2:2009 2.4 + L/300 at 18°C - 22°C C99 control unit with control panel Equipment: VAST XXT sensor 3-way probe changer magazine 2 probe change plates Calibration sphere with certificate Machine folder, device documentation, operating manual Various probes HP workstation and monitor SiPos preparation for automation possible Dujb Etjvdtvuj Efnjt Additional accessories Software: CMMOS and USoft-Solid ultra Presetting, measuring with/against CAD data, curves, and freeform surfaces Upgrade to Calypso with additional options possible Transport, commissioning, and calibration possible Immediately available

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 11 K/min. Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Hot chamber temperature range: +50°C to +220°C. Cold chamber temperature range: -80°C to +70°C. Test chamber dimensions: Width: 470 mm. Depth 650mm Height 410mm External dimensions: Width 930mm Depth 2115mm Height 1970+mm Plug-in diameter 67mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 10 kW Rated current 25 A Refrigerant R404A / R23 Weight: 1000 kg For your safety, the following information is provided as a buyer! Dujb Etewb Dqio Efnst The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg Dob Ejwbd Twjt Efnout

Condition: refurbished (used), Year of construction: 2025, operating hours: 15 h, Functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2024. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Dujbsu Dw S Rj Et Efnjt Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.

Condition: excellent (used), Year of construction: 1999, Control: CNC-controlled and manually controlled PC P 2000 MMX-PCI Desktop ATX color screen 15", keyboard CNC-Turbo roughness for WINDOWS TECHNICAL DATA Hard stone test plate (DIN 876) length x width 1200 x 500 mm Accuracy grade 2 Flatness 16,6 µm Weight 250 kg Linear feeder Waveline 60 Basic Probe length 60 mm Resolution 0.014 µm Measuring column Wavelift 400 CNC Travel 400 mm Positioning repeatability ˂ 10 µm Device dimension W x D x H 1.8 x 0.8 x 2.2 m Weight 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller blinds  Hard stone plate 1200 x 500 mm  ISEL-feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wawelift 400 CNC  Tilting unit KEG 60 at the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurements  Instrument table  Emergency stop button on the instrument table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for mounting the hard stone plate  Documentation Dusbepq Rnus Et Efnjt

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, total width: 1,350 mm, total length: 2,800 mm, total height: 2,000 mm, type of input current: DC, input voltage: 230 V, workpiece weight (max.): 50 kg, ambient temperature (max.): 70 °C, measuring range X-axis: 2,250 mm, measuring range Y-axis: 1,125 mm, warranty duration: 12 months, 2-axis manual measuring table, demonstration model, fully functional, like new. Manual measurement of flat workpieces such as wood panels, insulation boards, sheet metal, etc. Welding frame - powder-coated - RAL 5010 Base frame manually adjustable via hand crank (screw jack): horizontal - vertical approx. 30° Component support: screen-printed plate, optionally with Mink brushes for sensitive components X measuring axis / length 0 - 2250 mm Y measuring axis / width 0 - 1125 mm Profiled rail guide, stainless steel with recirculating ball bearing technology. Manual clamping element via lever on each axis. Geometry measuring stop 30x90 mm. Magnetic displacement measuring system, incremental, battery-operated. LCD display, battery life 4 years. Resolution 1/0.1/0.01 mm freely programmable. Dueb Etewhfrze Efnet System accuracy +/- 0.1 mm. Includes factory calibration certificate and 12-month warranty.

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, Zeiss CNC coordinate measuring machine Prismo MP5 Year of manufacture: 8/1999 Last calibration: 9/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Features, Equipment: C98 control system with control panel Dueb Esufgbnjt Efnot RDS sensor system with RST 5-way probe change magazine RST 5x probe system Reference probe Probe accessories Calibration sphere Computer with monitor Calypso Basic 5.4 software Loading system Further accessories and options available Complete retrofit of C99 and Calypso possible Available at short notice

Condition: excellent (used), Vötsch Type: VT 7034 Test chamber capacity: 335 liters Capacity for temperature tests Temperature range: -70 to +180°C Temperature deviation (temporal) K ±0.1 to ±0.5 Dob Etswbpvwo Efneut Temperature deviation (spatial) K ±0.5 to ±2.0 Rate of change: Cooling: 1.3 K/min According to IEC: Heating: 3 K/min Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 5.9 kW, Rated current: 12 A Side feedthrough: 5.5 cm / 12.5 cm Cabinet is air-cooled Refrigerant: R 404A and R 23 For your safety, the following information is provided as a buyer! The following procedures are performed on the chambers we offer in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, type of input current: AC, input voltage: 240 V, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Dob Eewgm East Efneut Features: o Loading ports for 6 and 8 inch wafers o Internal handler, robot, and prealigner o 1x, 2x, 5x, 10x, 20x lenses o Internal barcode reader o Black/white inspection camera o Color review camera o Front-site and cluster-site computers (WIN7) o Software version 3.9.4.18

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, Functionality: fully functional, machine/vehicle number: 1C0Q000107, type of input current: AC, The offer includes the following: IM-8020 measuring head IM-8000 control unit Djbjwhuhrj Et Efneut

Condition: excellent (used), Year of construction: 1998, Control: CNC-controlled and manually controlled PC P 2000 MMX-PCI Desktop ATX color screen 15", keyboard CNC-Turbo roughness for WINDOWS TECHNICAL DATA Hard stone test plate (DIN 876) length x width 1200 x 500 mm Accuracy grade 2 Flatness 16,6 µm Weight 250 kg Linear feeder Waveline 60 Basic Probe length 60 mm Dusb Eopq R T Sst Efnet Resolution 0.014 µm Measuring column Wavelift 400 CNC Travel 400 mm Positioning repeatability ˂ 10 µm Device dimension W x D x H 1.8 x 0.8 x 2.2 m Weight 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller blinds  hard stone plate 1200 x 500 mm  ISEL-feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wawelift 400 CNC  Tilting unit KEG 60 at the measuring column, manual to the Waveline  Installation kit for roughness measurement  Probe and holder for roughness measurement  Device table  Emergency stop button on the instrument table  Maintenance unit for compressed air preparation  Air damping elements for mounting the hard stone plate  Documentation

Condition: used, Unit 1 Type: Systemlaborabzug Model No.: 14916 Date of Manufacture: 11/2010 Voltage: 230V Frequency: 50 Hz Power: 2.5 kW CE certified Unit 2 Type: Systemlaborabzug Model No.: 18316 Date of Manufacture: 04/2013 Voltage: 220-230V Frequency: 50/60 Hz Power Consumption: 3.7 kVA Weight: 280 kg Duob Et Efewd Nbrsnot Made in Germany CE certified

Condition: used, Year of construction: 2016, Functionality: fully functional, Equipment: type plate available, A Keyence coordinate measuring system is for sale. The following components are included: - XM-1500 control unit - XM-S1200 adjustable measuring stage Dsb Et Eowf A N Sefnsut - 2x SM-P1000 measuring probes - XM-M1200 monitor - Calibration unit - Connecting cables - Carrying case & original packaging - Manufacturer's certificates The measuring machine is functional and immediately available. The technical specifications can be found in the attached data sheet. The operating instructions are included in digital form. It will be shipped securely packaged in the original carton.

Condition: excellent (used), Espec Type: EWSH282-4CW Temperature and Climatic Test Chamber Water-cooled Temperature range: -65°C to 150°C Temperature fluctuation: ±1°C Temperature gradient: ±2°C Temperature change rate Heating: approx. 2.5K/min Cooling: approx. 2.5K/min Humidity range: 20 to 95°C RH Humidity fluctuation: ±5% RH Humidity gradient: ±5% RH Duob Et Efskl Axtjnet Dimensions External dimensions: Width 2324 mm, Depth 4006 mm, Height 2889 mm Internal dimensions: Width 1829 mm, Depth 1829 mm, Height 2388 mm Voltage: 8.0 m³ Weight: approx. 3,600 kg Power supply: 400V, 3PH, 50HZ (+5% / 10%) Controller: Espec SCP-220 Refrigerants: R-404a and R-508b Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: like new (used), Functionality: fully functional, Geosig Accelerometer with recorder GeoSIG GMS plus Recorder model no GMSplus-IP67 Debsq S Uz Ue Et Efnout Geosig Accelerometer/sensor Model AC73 Type HHV Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is new/unused. In addition to this new unit, there is a stock of approximately 100 used sensors and 100 used recorders available.

Year of construction: 2016, Condition: excellent (used), Electrical pressure force tranducer 722DS-300kN or 722DS-1MN with load button, compression plate and 10cm fixed cable with connector Measuring range 0...300kN or 0...1MN Max. dynamic load up to 225kN or to 750kN Sensitivity 2mV / V Dob Ejfm Elpst Efnout Total error ᐸ± 0.15% F.S. Dimensions according to data sheet 722DS-300kN_1MN

Condition: used, Glasses Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety controller: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: adjustable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/pivoting membrane holder with 3 removable cascade rings for filter membranes with a diameter of 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; Length: 5 inches System pressure: maximum 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41°C Tank volume: approx. 12.8 liters Tank can be filled via a manual 3-way ball valve Recirculation and reuse of the rinsing medium Permissible ambient temperature: +15…+25°C Noise emissions are below 70 dB (A) Flow-cap top with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis fluid thanks to a sliding guard Collecting tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass keypad and stylus with the 12" option COMFORT touch panel 32 different test programs, each with 30 rinsing steps Functions: Spraying, rinsing, ultrasound Basin 750 x 600 x 500 (W x D x H) mm with a usable volume of approximately 5 l for ultrasound (with hemisphere Ø300) Hinged safety screen with three movable panels for manual access (protects employees from splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. A 2.5 mm diameter nozzle is included. Insertion opening for components: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic application for components up to 3 kg Product support grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Power supply (machine): 230 VAC 10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Back-up fuse: 16 A (max.) Supply cable: at least 3 x 1.5 mm² Control voltage: 24 VDC3) Deb Etjwaypfo Efnsut External dimensions: H x W x D 1922 x 800 x 893 mm Weight: 324 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: refurbished (used), Overhauled tensile testing machine model Erichsen 472-500N Force Range: 0-500N Traverse resolution: 0.01mm Test speed: 0.5-500mm/min Truss stroke: 800mm Installation space width: 205mm Dimensions (HxWxD): 1035 x 340 x 320mm Weight: ca.40kg incl. 200N force transducer Force transducer model 713-200N Measuring Range: 0-200N (Optionally, other force transducers possible) incl. new machine control system Controller board with USB port for PC control via Windows incl. software package PM-Soft-Smart PC control and evaluation software for testing machines, executable on PCs with WINDOWS 10 or 11. The modern and powerful test software enables test sequences and evaluations in accordance with the relevant test standards, as well as the self-design of test templates and evaluations with the integrated test template editor and the protocol generator. Duobjndca Ro Et Efnet Hint: The software offered requires a PC with Windows 10 or 11 and a USB interface. Incl. factory calibration of the force transducer in tension and compression direction with calibration certificate

Condition: excellent (used), CTS Type: TSS-70/130 CTS Temperature Shock Test Chamber, Water-Cooled Type Series TSS-70/130 Test Chamber Volume: 130 liters Dob Et Eowaanuofnsut Test Chamber Dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External Dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Temperature Working Range: Temperature Range in °C: Hot Chamber +50/+220°C Cold Chamber -10/-70°C IC Temperature Transfer Time < 15 min in kg 10.0 Car Changeover Time in sec. < 10 Max. Test Weight in kg 50 Temperature Constancy, Time in K ± 1 Electrical Connection 400 V +6% -10%, 3/N, 50 Hz Connected load in kW approx. 16.6 Condenser: Water-cooled chiller Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Fill-in diameter in mm 125 Refrigerant: R404A/R23 Weight: 950 kg For your safety, please note the following information! The following procedures are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT³ 4150/S Vötsch temperature test chamber Duob Et Eoinuhgofnot Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.