Used material testing for sale (472)

Condition: used, Pore finder, pore finder, surface tester Hfjdpeb Uhtqefx Aaled -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

Condition: used, Pore finder, pore finder, surface tester Hfsdpfxob Riagj Aalsd -portable high-voltage pore detector -to locate: pores, cracks and other imperfections -Dimensions: 365/220/H260 mm -Weight: 7.5 kg

Condition: used, Measurement data acquisition device, test device, communication system, data acquisition system -DSM: Nanoserver 96M1566L -suitable for: mobile applications -Input: 8-30 V DC, 15 A Hodpjff Nmbjfx Aaljfd -Dimensions: 245/220/H120 mm -Weight: 2.8 kg

Condition: used, Inductive conductivity transmitter -Type: 2 AMLid-184 -Sensor immersion depth: 1115 mm Hodpfxob Uhtge Aalefd -Total length: 1337 mm -Weight: 3 kg

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Hjdjxruklepfx Aaljfd

Year of construction: 2016, condition: ready for operation (used), An almost new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed from 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed from 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: less than 50h. The machine shows no wear on the conveyor belt or the radiation protection curtains. Documentation available. On-site inspection is possible. Hfsdevzr Aujpfx Aalod

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Hsdpfxexvdfme Aaljfd

Year of construction: 2019, condition: ready for operation (used), A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000. Hsdpot Daq Uofx Aalofd

Year of construction: 2018, condition: ready for operation (used), A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available. Hfodot Dpn Aepfx Aaljd

Year of construction: 2017, condition: ready for operation (used), A portable surface roughness measuring device Mitutoyo including a granite plate is available. Measurement range X: 17.5mm, measurement range Z: -200µm-160µm, Z resolution: 0.002µm, measuring speed: 0.5mm/s, return speed: 1mm/s, granite measuring table dimensions X/Y/Z: 400mm/250mm/70mm. Documentation available. An on-site inspection is possible. Hodpfxjya Hx Ss Aalofd

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Hfjdoxhntlopfx Aaljd

Year of construction: 2015, condition: ready for operation (used), An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Hfodexnp Scspfx Aaled

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Hfedpexrukrefx Aalsd

Condition: ready for operation (used), An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible. Hsdexrukxepfx Aalefd

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base Hodpfxsxtfqxs Aalsfd • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Year of construction: 2018, operating hours: 1,448 h, condition: excellent (used), Advanced X-ray inspection with the perfect balance of high performance detection sensitivity and low operating costs Advanced X-ray detection that strikes the balance between optimal sensitivity and economic operation. Suitable for a wide range of products, this X-ray inspection system can be adapted to virtually any application. -GA (Genetic Algorithm) image processing optimises detection for individual customer requirements -Integrated air conditioning system -User-friendly 17” touch screen control Hfjdpfx Ajynzaaoalsd Technical data in attached leaflet

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: Hfodsvbwziepfx Aalod • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.

Year of construction: 2025, condition: used, Universal Testing Machine PM10 Hfedpfx Aajyc U Ugslod Force: 10 kN Crosshead stroke: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick tests' without the need for a PC. For tests requiring data storage and curve recording, the basic software provides full control and evaluation capabilities. It allows you to generate various test sequences and create test reports. In addition, you have the option to further process the raw data in your own programs. Options: - Delivery and commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: good (used), Hardness tester functional Hsdpfxeydlf Sj Aaljfd

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Material Testing Machine Type RME 250 kN • Load frame and drive by Schenk Trebel, year of manufacture 1985, overall height approx. 3.3 m. Crosshead travel approx. 2 m • Modernisation around late 2003: Equipped with “testControl” control electronics by ZwickRoell • Upgrade in 2010: Universal extensometer system MultiXtens by ZwickRoell, with swivelling device and two pairs of measuring heads (see photo) and a new testControl module • Info: The testControl module operates with the current "testXpert III" software by ZwickRoell (one license for testXpert III version 1.51 is included in the price) • Temperature chamber retractable into the test area of the machine (see photo), year 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C, coolable with liquid nitrogen down to approx. -40°C • Load cells: 250 kN and 50 kN (currently installed, see photo); additionally: 5 kN, 1 kN, and 500 N (see photo) • 2 wedge-type specimen holders (see photo) Condition of the machine The machine was used for tests in recent years up to early 2026. The 50 kN load cell and the crosshead travel sensor were used (both sensors: last calibration on 06.05.2024 including standard inspection work). A defect in the servo amplifier for the drive (component within the testControl module) has, since around autumn 2025, led to frequent connection losses to the software and to drive shutdowns until hardware and software are restarted. The servo amplifier or the entire testControl module must be replaced (cost details can be requested from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since then. Hodsyhb Rlopfx Aalefd The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping devices shown installed in the machine in the images will be removed and retained by the vendor.

Condition: excellent (used), Espec Model: PL-2KPH Hfodpfx Aaex Iu I Selsd ESPEC PL-2 KPH Climate Chambers, Air-Cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependence on temperature range and humidity fluctuations: ± 2.5% RH over time, ± 3.0% RH Internal dimensions (WxHxD): 500 × 750 × 600 mm External dimensions (WxHxD): 910 × 1590 × 973 mm Microprocessor control with 10 pre-set international test standards and 20 freely programmable memory slots, as well as built-in timer with programmable start/stop automation and error code display. Programming via touch screen. Alarm display (audible and visual). Device protection against overtemperature: Overtemperature protection with two switching contacts Illumination of testing chamber Operating hours counter Test chamber volume: 225 liters Net weight: 300 kg Electrical connection: 400 V 3/N 50 Hz, Plug: CEE 16 A, max. current: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Buyer information for your security: The following procedures are carried out in advance on the chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: excellent (used), Heraeus Hodpfsvyd Adsx Aalsfd Type: HA 2472 BS Cleanroom workbench for installation and operation in laboratories Interior dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Condition: used Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Climats Type: EXCAL 1413-HA Air-cooled climate control cabinet EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD memory, Windows 7 and 2 USB ports. This means it is state-of-the-art. Technical data: Test room dimensions: width 550 mm x depth 500 mm x height 500 mm Housing dimensions: width 820 mm x depth 1375 mm x height 1730 mm Window 350 x 380 Volume: 138 liters Flow-through installed in basic equipment R1: 80 mm ∅ L1: 80 mm ∅ Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.8 K Temperature change rate Heating 15 K/min Cooling 10 K/min Data for climate tests: Temperature range + 10 to +90 °C Humidity range 10 to 98 %r.h. Data for operation: 3/N/Ph+T 400V±10% 50 Hz Rated power 9.8 KVA Refrigerant R-404A / R-23 Weight: 430 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Hfodpfxev Dt T Tj Aalsd Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C Hedpfx Aswfddwoalefd External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Hjdjwfdniepfx Aaljfd External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.