Used manipulators for sale (36)

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Gsdpfx Asylzurscijbt Winding diameter: 40 mm, laying width: 150 mm Max. wire diameter: 1.0 mm HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 2260081, load capacity: 400 kg, Hello, Gbjdpfjwcpl Uox Acist I have this fully pneumatic DELMEC remote arm, which can lift and move up to 400 kg with one hand. The machine has been used very little; it's a showroom model. The machine is complete and in perfect working order. It can be sold as is, delivered, and even installed (to be determined together).

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no Gbedpfx Acjyta R Ujiet – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 332113-01-01, overall weight: 172 kg, maximum load weight: 70 kg, Equipment: CE marking, Manipulator for furniture racks. Device facilitating the lifting of finished cabinet furniture components. Gbedpjxz Dw Tefx Aciet

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Gbsdsurlcrjpfx Acijt Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: used, We offer for sale manipulators (new) as well as used single axes, accessories, and wiring. Gbjdoyc Rv Topfx Aciet Delivery term: EXW Trstena Minimum order value: €5,000

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, Gbsdpofz Dmmjfx Acist as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h Gbsdofz Dqmopfx Aciot • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically Gbedpfxofy T Are Aciet This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed Gedpfx Aev Rpx Ssciobt X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Gjdpomu Agpefx Acijbt Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation.