Used manipulators for sale (36)

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Gbedpfx Acszz Agmsiot Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: like new (used), functionality: fully functional, Arm lifting capacity 120 kg, length 600 cm Vacuum suction cup, lifting capacity 120 kg MANUT, year 2006 Godpjzz N H Tefx Aciebt Siemens pump motor power 3 kW Base length 365 cm

Condition: like new (used), functionality: fully functional, arm lifting capacity 120 kg, length 370 + 240 cm air suction cup lifting capacity 120 kg MANUT Siemens pump motor power 3 kW Gbsdpezz N Iwefx Acist base length 365 cm

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: F16/56XTA1/A/01, overall weight: 1,120 kg, load capacity: 100 kg, input voltage: 400 V, type of input current: three-phase, Stäubli TX200 industrial robot including CS8CHP controller and Stäubli teach pendant – manufactured in 2016. We are offering a used Stäubli TX200 industrial robot for sale, including the original Stäubli CS8CHP controller. Technical specifications: Manufacturer: Stäubli Model: TX200 Controller: CS8CHP Year of manufacture: 2016 Payload: 100 kg Condition: Used Scope of delivery: Stäubli TX200 robot Original Stäubli CS8CHP controller Stäubli teach pendant Connection cable Operating manuals Scope of delivery as shown in the photos Godpfszli Huex Acijbt The robot comes from an industrial research and development environment and has been carefully maintained. The system was in operation until it was dismantled. Inspection is possible by appointment. We will gladly send you further photos or technical information upon request.

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 1750851, load capacity: 100 kg, Dalmec manipulator with vacuum generator and column. Removed from an unused production line, in perfect condition. Tested, fully functional, practically new. Working range: 2,530 mm Vertical lift: approx. 1,700 mm Load capacity: max. 100 kg Gedpsxxbczofx Acijbt Manipulator weight: 450 kg + column Our company can arrange professional transport and commissioning if required. Please feel free to call us for more details. (English is preferred). The indicated price is for 1 unit. Only 1 unit remaining!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale is a high-quality, customer-specific robotic handling system from Wehling Anlagen- und Maschinenbau GmbH, manufactured in 2018. The system was originally developed for the automated processing of wooden pallets and large-format sheet materials and combines two work processes in one system: * automatic destacking of nested wooden pallets * automatic sorting and restacking of large-format sheets according to quality classes The core of the system is a powerful 6-axis Kawasaki BT200L industrial robot with an automatic tool changer. The system is ideally suited for applications in the wood, construction materials, sheet materials, and logistics industries, or as a basis for individual automation projects. Technical equipment: Manufacturer: Wehling Anlagen- und Maschinenbau GmbH Year of manufacture: 2018 Project No.: P113104 Kawasaki 6-axis industrial robot BT200L Robot payload: 200 kg Large working radius Siemens TP700 Comfort touch panel PLC control Main switch cabinet Automatic tool changer Pallet gripper Sheet suction gripper 4 pallet stations Automatic pallet recognition Paper dispenser for interleaving sheets Safety fence Safety light curtains Pneumatic system Possible applications: Pallet handling Pallet destacking Pallet turning Sheet sorting Gsdpfjziwprox Acijbt Order picking Material handling Automation of manufacturing processes Robotics projects Retrofitting of existing production systems Scope of delivery: Complete robotic system Kawasaki BT200L Robot controller Switch cabinet Siemens HMI Pallet gripper Sheet gripper Tool changer station Pallet stations Paper dispenser Safety fence Safety light curtains Documentation Operating manual Condition The system is in operation. The scope of delivery corresponds to the existing components. An inspection is possible by appointment. Special features: Special machine construction "Made in Germany" High-quality Kawasaki industrial robot Extensive documentation available Ideal basis for retrofit or automation projects Technical data: Feature Value Manufacturer Wehling Anlagen- und Maschinenbau GmbH Type Combined system pallet destacker / sheet sorting Year of manufacture 2018 Project P113104 Robot Kawasaki BT200L Payload 200 kg Control Siemens TP700 HMI / PLC Gripper Pallet gripper + sheet suction gripper Safety equipment Light curtains, protective fence

Condition: excellent (used), Year of construction: 2022, operating hours: 1,619 h, functionality: fully functional, machine/vehicle number: PEC 50 2158273, total height: 3,000 mm, total width: 1,000 mm, total length: 1,000 mm, type of input current: three-phase, input voltage: 400 V, Arm-mounted manipulator with a gripper for cylindrical parts. Gjdpow Hwq Tjfx Acisbt

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 2260081, load capacity: 400 kg, Hello, I have this fully pneumatic DELMEC remote arm, which can lift and move up to 400 kg with one hand. Gbodpfx Acswcpl Usiot The machine has been used very little; it's a showroom model. The machine is complete and in perfect working order. It can be sold as is, delivered, and even installed (to be determined together).

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 332113-01-01, overall weight: 172 kg, maximum load weight: 70 kg, Equipment: CE marking, Manipulator for furniture racks. Device facilitating the lifting of finished cabinet furniture components. Gbedpfxjxz Dw Ts Aciet

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Gjdpfsmu Agpox Aciobt Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation.

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Mounting: Ceiling Ceiling guide length: approx. 15 meters Availability: 2 units Load capacity: Manipulator 1 – 30 kg Manipulator 2 – 35 kg Number of axes: 4 Gripper: Pneumatic parts gripper (per manipulator) Gbodpfx Aowvi Upecijt For suspension on the rail

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Gedpfx Acsx R A Nveisbt Model : MAN Year: 2017 Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Maximum load : 30 kg Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Gbedpfxsyta R Uj Acijt Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Condition: ready for operation (used), Year of construction: 2021, A barely used allround PCB handling station RG Elektro-Technologie for loading purposes is available. Application possibility: before AOI/after AOI/combined, PCB transport height range: 930mm-970mm, min. PCB dimensions X/Y: 80mm/50mm, max. magazine dimensions X/Y/Z: 360mm/360mm/570mm, machine dimensions X/Y/Z: approx. 1200mm/1700mm/1800mm, weight: approx. 250kg, control: Siemens S7-1200. Documentation available. An on-site inspection is possible. The image is an example. Gbedpfsy Ndf Nsx Acijt

Condition: new, Year of construction: 2020, Skid Conveyor Technology Gjdpfx Acsznh T Seiebt Eisenmann 6-meter SKID roller conveyor

Condition: good (used), Year of construction: 2017, functionality: unexamined, We offer this well-maintained Förster Welding Systems 4225 railing welding fixture, year 2017. Manufacturer: Förster Welding Systems Model: 4225 Year of manufacture: 2017 Condition: good Category ID: 96 Type ID: 2257 Machine type: railing welding fixture Gbedpfx Acsy N A U Aeist If you have any questions or need more information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, A conveyor belt is available for buffering and transferring PCBs between processing systems. Transport height: 870mm-970mm, max. transport width: 460mm, min. PCB dimensions X/Y: 70mm/50mm, max. PCB dimensions X/Y: 460mm/460mm, PCB thickness: 0.5mm-4.5mm, max. PCB weight: 3kg. Machine dimensions X/Y/Z: approx. 1590mm/800mm/925mm, weight: approx. 170kg. Documentation available. On-site inspection is possible. Godpfx Aewwvvvscijbt

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Winding diameter: 40 mm, laying width: 150 mm Max. wire diameter: 1.0 mm Gedsylzurspfx Acisbt HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: used, machine/vehicle number: 85252. und 85122, Coil winding machine Aumann WG 85253 Winding diameter 160 mm, laying width 550 mm Wire guide DF 50 No. 85099 defective Coil winding machine Aumann PW 85122 Gbjdpfeylztujx Acist Winding diameter 100 mm, laying width 200 mm Wire guide DF 70 No. 85115

Condition: used, machine/vehicle number: 423. 1245102, 4-strand flyer with reversing beam Wire diameter: 0.05 to 1.0 mm 2-strand flyer with reversing beam Gbsdpfx Aeylzlksciot Winding diameter: 90 mm, traverse width: 120 mm Max. wire diameter: 1.0 mm

Condition: used, We offer for sale manipulators (new) as well as used single axes, accessories, and wiring. Delivery term: EXW Trstena Godpfx Acoyc Rv Toijbt Minimum order value: €5,000

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Gjdpfxeu H R Iwj Acijbt Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min Gsdpov Rpx Ssfx Aciebt • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Gjdpov Hdk Ijfx Aciobt Number of axis: 6 Payload: 5 kg

Condition: ready for operation (used), A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible. Gsdpfxswixzxo Aciobt