Used laser cutting machines for sale (392)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Gedpfx Aozu Avzociekb Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Maxphotonics, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Why still bother with the cut quality of fine plasma systems? Why still waste valuable space in your workshop with a rotary table? Why still spend thousands of euros each year on expensive plasma wear parts? In addition to the obvious advantages of modern fiber laser technology regarding precision and virtually burr-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is much easier to operate than plasma cutting systems. And the best part is that we, Schmidt & partners Cutting, support your system from our two service centers throughout its entire service life. We are a reliable partner in the cutting world, providing perfect consulting, installation, training, maintenance, and repair services. We support you with our know-how and experience, including cutting parameters for special materials. We also gladly assist you with the implementation of this technology in your company, particularly with regard to the specific occupational safety aspects of laser technology. Gedpjzkuu Iefx Aciekb kaitec FIBER Pro HGLQ 3015 Cutting area 1,500 x 3,000 mm Max. sheet thickness 35 mm (depending on the laser source power) Laser systems 2kW / 3kW / 4kW / 6kW / 12kW Maxphotonics series (in cooperation with AK Industry GmbH, the certified service partner in Germany) CE certified, risk assessment completed Do you not yet have a suitable filter system? We will gladly select the appropriate filter system to meet your needs. We look forward to hearing from you!

Condition: used, Year of construction: 2021, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 2,000 W, pipe length (max.): 6,000 mm, working length: 6,000 mm, input voltage: 400 V, type of cooling: water, overall weight: 8,000 kg, HSG TH65 tube and profile cutting laser. The machine is designed for processing various types of metal materials, including structural steel, stainless steel, and aluminum. It enables the cutting of tubes and profiles. The device is equipped with an automatic material feeding system, a laser cutting head, and control software. The machine can be inspected at our production facility. Cutting tests can be arranged upon prior agreement. Gedoxu Ewhjpfx Aciekb

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 174688 € 3301.6 € 3 kW Manueller Tisch 16 mm 8 mm 8 mm 5 mm 8 mm 3060 x 1530 mm 3060 mm 1530 mm 140 mm 3048 x 1524 mm 160 kg/m² 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Aircondition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW Mild steelS235 20 25 Stainless steel(304) 10 15 Aluminium (5083) 12 20 Copper 6 10 Gkodpex U Elhefx Acijb Brass(CuZn39 Pb3) 10 12 OPTIONS: Suction unit with filter Shuttle table

Condition: like new (used), Manufacturer: FANUC Corporation Model: FF4000i-A Machine type: Fiber laser Laser power: 4 kW Laser technology: Fiber laser Manufacture date: June 2016 Power supply: 200 V / 220 V Gsdpfx Acsyt Db Doiskb Frequency: 50 / 60 Hz Rated power: 28 kVA Rated current: 16 A Short-circuit current: 5 kA Country of Manufacture: Japan Accessories: Transformer FANUC LX80L-0003-0611 Transformer power: 30 kVA Primary voltage transformer: 400 V ±5 % Secondary voltage transformer: 200 V Transformer frequency: 50 / 60 Hz Transformer weight: 125 kg Standard: EN61558-2-13 Scope of delivery: Laser source, transformer, two fiber optic cables Location: Fulda The laser has only been used as a demonstration unit at a trade fair in 2018, therefore very few operating hours.

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Gkodpfxeyut Dks Aciob Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, functionality: unexamined, If you need more details, feel free to write. Gkedewp Dfcspfx Aciob

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Maxphotonics, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, Why keep struggling with the cut quality of fine plasma systems? Why waste valuable space in your workshop with a shuttle table? Why continue spending thousands of euros every year on expensive plasma consumables? Gkjdpfxsy Smf Re Acieb Beyond the obvious advantages of modern fiber laser technology—particularly in terms of precision and almost burr-free laser cut quality—laser cutting is also incredibly economical. At the same time, operating a laser cutting machine is significantly easier compared to conventional plasma cutting systems. Best of all: At Schmidt & Partners Cutting, we provide comprehensive support for your system throughout its entire service life—from our two service locations. As a reliable partner in the cutting industry, we offer first-class advice, installation, training, maintenance, and repairs. Additionally, our experience and expertise is at your disposal for assistance with cutting parameters for special materials. We also gladly support you in planning and implementing the required occupational safety measures relating to laser technology within your company. PENTA LASER MINI BULL Cutting area: 1,500 x 3,000 mm Laser systems available from 2 kW to 60 kW CE-certified, with risk assessment Don't have a suitable filtration system yet? We will also design a custom filtration solution tailored to your requirements. We look forward to hearing from you!

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,172 h, laser type: CO₂ laser, laser power: 2,500 W, Equipment: cooling unit, DG Tech – Authorized BLM Group Inspection Center DG Tech was established as a spin-off of DGService to specifically cater to the market for used BLM Group machines. Leveraging our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Gkjdpfxjxqdg To Aciob LT722D Round tube: min 12 mm, max 140 mm – Square/rectangular tube: max 120×120 mm – Bar weight: max 15 Kg/m – Rear beam loader: 6500 mm – Unloader: 4500 mm

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - Ingress Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. Godpfophpi Ejx Aciskb RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,000 kg, total length: 8,500 mm, total width: 3,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal safety housing with radiation-shielded doors and windows. Environmentally friendly and safe for operators. Working Platform High-low parallel platform: Front end: Laser cutting. Rear end: Loading and unloading. No mutual interference → increased work efficiency. Gjdpfx Acjy R I Nbjiokb Machine Structure 10 kW bed structure: Segmented dust extraction with time-division control. Enhanced heat dissipation, resistant to thermal effects. Industrial auxiliary equipment: air conditioner, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision Guarantee: Bed machined by large gantry milling machine. Industrial-grade guide rails, gears, and ball screws. Fully servo-controlled, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Market-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components Laser cutting head BOCI BLT442 Laser source MAX 12 kW, CE certified Chiller HANLI 12 kW Guide rails TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Camera (2 units) Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlets: nitrogen, oxygen, air Lubrication system: automatic oil supply Accessories 30 protective lenses, 30 nozzles, tool kit. Optional: ARS-30HP-XF-1,6 MPA air compressor, 7.5 kW dust collector.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6kW mit CE, laser power: 12,000 W, sheet thickness (max.): 80 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, table length: 6,000 mm, table width: 2,500 mm, working length: 6,000 mm, working width: 2,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 13,500 kg, total length: 14,500 mm, total width: 4,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser cutting machine 6025, 30 kW – Overview Safety & Protection Fully enclosed metal enclosure with radiation-shielding doors and windows. Environmentally friendly and safe for operators. Work platform High and low, parallel platform: Front end: Laser cutting. Rear end: Loading and unloading. No mutual interference → increased work efficiency. Machine structure 30 kW bed structure: Time-shared, segmented dust extraction. Excellent heat dissipation, resistant to thermal influences. Industrial accessories: Air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life. Gkedpfx Aozb Uinscisb Precision guarantee: Bed processed by a large gantry milling machine. Industrial guide rails, gears, screw supports. Complete servo control, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Market-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core components Laser cutting head BOCI BLT442 Laser source MAX 30 kW, CE Water cooler HANLI 20 kW Guide rail TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Camera 3 pieces Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlet Nitrogen, oxygen, air Lubrication system Automatic oil supply system Accessories 30 protective lenses, 30 nozzles, tool kit. Optional: Air compressor ARS-30HP-XF-1.6 MPa, dust collector 11.5 kW.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Godpfozncm Hsx Acijkb Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PH3015: (6 kW) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. Gkodpfxsix Nn Uj Acieb - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS Model-S1530 Working area: 3.060*1.530 mm Laser power: 3 kW OR 6 kW Strokes on axele X/Y/Z: 1.500 / 3.000 / 100 mm Motors power on axes X/Y/Z: 0.85kW / 1.3 kW(x 2 dual motors) / 0.4 kW Maximum loading table: 800 kgs Positioning accuracy: ±0.03 mm Gksdpfjxfrgksx Acieb Repeatability accuracy: ±0.02 mm Maximum speed: 80 m/min Maximum acceleration: 0.8G Exhaust system: Included (with 1,5 kW fan) Machine size (L*W*H): 4.950*2.280*2.130 mm Total weight: 4.550 kgs Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2025, laser hours: 1 h, laser power: 12,000 W, power: 12 kW (16.32 HP), Description AORE PG3015: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 3015 mm table width 1550 mm laser head ( BOCI ) autofocus laser capacity Kw 12 overall dimensions 8.250 x 2.880 x 2.320 mm weight of the machine ca. 8.700 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Boci autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 45 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 375 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (12 second max for changing) Gkodpfovgrl Hjx Aciob - automatic change, max load on tables 1.440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 120 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, Year of construction: 2026, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Gkedpfx Asuruyaecijb High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: good (used), Arm length: 2x1800mm Gkjdpfx Acetxpgvoiob

Condition: ready for operation (used), Year of construction: 2019, This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. • 3 kW IPG fiber laser source • 2.5D cutting • Pipe capacity: up to 170 mm • Tube capacity: up to 120 x 120 cm • Minimum size: 20 mm • Inlet length: 6.5 m • Outlet length: 4.5 m, extended to 6 m Gkjdpfox D Ir Tox Aciob Additional equipment • Exhaust system • Spatter guard (spoon that extends 1 meter into the pipe to catch spatter) • Bundle loader at the rear for serial work • Chain loader at the front for small jobs

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been very well maintained, regularly cleaned, and serviced. It is in like-new condition! Godpfsy Tvzkjx Aciekb TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Sheet metal thickness max.: 15 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Automation level: Automatic Chuck type: Electric Input voltage: 380 V Input current type: Three-phase Laser operating hours: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation/Manual Safety light curtain Rotary table Extraction system

Condition: new, Year of construction: 2025, laser power: 3,000 W, table length: 3050 mm table width: 1530 mm laser head: ( SWISS RAYTOOLS ) autofocus laser capacity: 3kW overall dimensions: 5000 x 2250 x 2000 mm weight of the machine ca.: 3.300 kg Furnishing: - Max-photonics Laser source 3kW - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 18,5" screen, keyboard, control panel - central Lubrication system Cutting capacities: - normal steel:10 mm - stainless steel: 5 mm - aluminium: 5 mm - brass: 4 mm - copper: 3 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel: 1500 mm - Y-axis travel : 3000 mm Gkedpfx Aoix Nkbjcijb - Z-axis travel: 120 mm - Axis speed max X / Y: 80 m/min - Positioning accuracy:: +/- 0.05 m - Reputability accuracy :+/- 0.03 mm - Acceleration max. :0.8 G - automatic change, max load on tables: 500 kg. assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - part trolly under work table for collecting small parts - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 80 m/min. - Accelerations up to 0.8 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 20 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PG3015: ( 3 Kw) 40 sold in 10 month. We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 5.400 kg Furnishing: - Max-photonics Laser source 3 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 9 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) Gedpfx Aslkgd Ijciskb including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, Used Trumpf 5axis laser for sale / 3d laser for sale Used Trumpf 5axis laser for sale / 3d laser for sale Trumpf TLC Cut 5 Year 2006 Fully serviced twice a year by Trumpf Uk Last service January 2019 New vacuum pump fitted – 28/05/19 Hours: Beam on: 14,922 hours Laser on: 59,480 hours 3.2kw Fully serviced. Gksdpofuah Njfx Acijb Jigs / cutting beds included. Delivery and installation can be arranged.

Condition: used, Used Trumpf fiber laser for sale Used Trumpf fiber laser for sale Trumpf Trulaser 5030 Fiber 5kw flat bed industrial cnc laser for sale Year 2014 Laser Power 5000w / 5kw Working Range 3000 x 1500 x 115mm Control Siemens Sinumerik 840D Max. Mild Steel 25mm Max. Stainless Steel 20mm Max. Aluminium 15mm Space Requirement 12000 x 5200 x 2000mm Machine Weight 14,500kg Gsdpfx Acjfuah Eoiskb TRUMPF TruLaser 5030 5kW BrightLine Fiber – L56 / L68

Condition: new, functionality: fully functional, Year of construction: 2026, Work area: 3,015 mm (sheet metal + tube) Laser power: 6,000 W – Chuangxin Clamping head: Ruika 240 Laser head: Baichu Control system: Baichu Servo / linear guide: Inovance / Penac Rack / gearbox: YYC / Motoli Chiller: Special Domain HTL Series (HTL3015 / HTL4020 / HTL6020 / HTL6025 / HTL8025 / DHTL12025) WE HAVE MORE TYPES OF LASERS, EVEN LASER BOX ROOM NEW – DS Series Fiber Laser Cutting Machine | Available in 6 models | Immediate delivery from stock Condition: new, Year of manufacture: 2025, Functionality: fully functional TECHNICAL SPECIFICATIONS: Max. processing sheet: 3,000 x 1,500 mm (DS3015) up to 12,000 x 2,500 mm (DS12025) X-axis stroke: 1,530 mm (DS3015) – 2,530 mm (DS12025) Y-axis stroke: 3,030 mm (DS3015) – 12,030 mm (DS12025) Z-axis stroke: ≤150 mm (smaller models) / ≤200 mm (DS8025, DS12025) Max. XY speed: 120 m/min Max. XY acceleration: 1.2 g (DS3015) – 2.5 g (DS12025) X/Y positioning accuracy: ±0.03 mm (DS3015/DS4020) / ±0.05 mm (larger models) X/Y re-positioning accuracy: ±0.02 mm (all models) AVAILABLE LASER POWER OPTIONS: 1 kW / 1.5 kW / 2 kW / 3 kW / 4 kW / 6 kW / 8 kW / 12 kW / 15 kW / 20 kW MACHINE FEATURES: Welded steel frame with high-temperature aging treatment for long-term rigidity Gantry dual-drive structure for stable high-speed motion Aviation-grade aluminum beam and Z-axis High-precision rack and bilateral gear system Concave-convex follow-up cutting head for adaptive surface tracking Universal steel ball support table Multiple limit protection: induction limit, hard limit, origin limit AVAILABLE OPTIONS: Gkodpjymc Ucofx Acisb Dust collector: 4 filters (5.5 kW) / 6 filters (7.5 kW) / 8 filters (11 kW) Stabilizer: SWF-30KVA up to SBW-150KVA INCLUDED SERVICES: 12-month warranty Spare parts availability Technical support and commissioning assistance CE documentation available upon request Sold by HawkTech s.r.o. – certified industrial machinery dealer, Czech Republic. Delivery to CZ, SK and EU. Price on request.