Order this product directly from L. Den Hartog Machines and ToolsThis connection cable is suitable for the LED lighting 8W for workshop modules. Packing dimensions Packing length (mm) 150 Packing width (mm) 10 Packing height (mm) 10 Packing weight (kg) 0.1
Bpsyyh8c0s
Order this product directly from L. Den Hartog Machines and ToolsExtension block 3 fold 5 meter cable 3x1.5 mm + RA and hinged covers neoprene
Vl0i7ng
Order this product directly from L. Den Hartog Machines and ToolsFluxon cable reel 30m 3G 2.5 mm Very robust extension cable with 4 sockets including thermal protection. Specifications: cable = H07RN-F length = 30m number of wires = 3 conductor cross-section = 2.5 mm2 IP44 Product dimensions Product length (mm) 310.0 Product width (mm) 240.0 Product height (mm) 390.0 Product weight (kg) 9.2 Packaging dimensions Packaging length (mm) 300 Packaging width (mm) 210 Packaging height (mm) 430 Packagi...
Order this product directly from L. Den Hartog Machines and ToolsFluxon cable reel 30m 3G 1.5mm Very robust extension cable with 4 sockets including thermal protection. Specifications: length = 30m number of wires = 3 conductor cross-section = 1.5mm2 IP44 Product dimensions Product weight (kg) 7.7 Packaging dimensions Packaging length (mm) 300 Packaging width (mm) 210 Packaging height (mm) 430 Packaging weight (kg) 7.8
L20zs7k
Order this product directly from L. Den Hartog Machines and ToolsSleepkabel 5 Ton Strong nylon tow belt with a strong hook with safety flap on both sides. Maximum 5 Ton. Length approx. 4.5 metres.
Ii7nuva7
Order this product directly from L. Den Hartog Machines and Tools
Bprvcqvrw2
Order this product directly from L. Den Hartog Machines and ToolsNeoprene extension cord 20 meters Rugged extension cord with 3x1.5 mm cable with protective earth. Equipped with plug and lockable socket
Irss0ff9
Order this product directly from L. Den Hartog Machines en GereedschappenExtension cable 20 meters orange orange extension cable for indoor use. Maximum load 2500 tbsp thickness 2x1.0 mm. Type of cableH05VV.
Vtuhz3
Order this product directly from L. Den Hartog Machines and ToolsFilled with various cable lugs and cable connectors for wire thicknesses from 0.5mm to 6mm. Contents: 22-18ga Cable connectors MPD 1.25-156, Male, red (20 pcs.) 16-14ga Cable connectors MPD 2-195, Male, blue (15 pcs.) 12-10ga Cable connectors MPD 5.5-195, Male, yellow (10 pcs.) 22-18ga Cable connectors FRD 1.25-156, Female, red (15 pcs.)) 16-14ga Cable connectors FRD 2-195, Female, blue (15 pcs) 12-10ga Cable connectors FRD 5.5-19...
3
100 $
Starting bid not including VAT
Another 5 days
Another 5 days
Modern Machine Tool Company, cut off tubing machine, model 2LD, with Allen Bradley Communication display, has dry type transformer, .500 KVA, primary voltage of 24480, secondary of 12240, also includes (1) Modern Machine Tool Company, model 2LD, bar stock feeder table, approx. 30' length x 80" width, unit comes with manual, single spindle lathe type, S/N 2LD2341, in working condition, winning bidder responsible for proper removal and disconnect of unit.
Ewcanhp
Online Auction: Wednesday, Januar...
Temperating machine , Make Tool Temp, Type TT-162E, Floorspace 0,8x0,3 M, Total height 0,9 M, Weight 120 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Rkab9ya7
diameter 90 mm
workpiece length beliebig mm
work piece width beliebig mm
Bürstendurchmesser 250 mm
Bürstenbreite 60 mm
voltage 380 V
frequency 50 Hz
power capacity 3 kW
weight of the machine ca. 0,1 t
dimensions of the machine ca. 1,0 x 0,6 x 1,2 m
M8zbld
This machine is well suited for burring of fore-parts
and side walls,
mounted on machine cupboard,
with accessory parts for short work pieces and plate edges,
Straight Tube Cutoff System for 7,5mm x 0,5mm tubing
we used it to cut CuNi90/10 and Stainless Steel Tubing
technically ok ... works perfectly and ran smoothly for 20 years!
cuts and straightens tubes from the roll(coil)
feeding of individual straight pipe tubes is also possible
not cleaned
Hnxmhxooe
Including operating instructions
Water cooling unit for water temperatures +10°C to +40°C at ambient temperatures up to +45°C.
Cooling capacity 28 KW normal capacity
Gwy8ag
Heating 6 KW; Water tank 150 l ; Refrigerant R-134a; Electronic controller with digital display; Air volume 5700 m3/h; Connected load approx. 8.5 KE
CNC Tool Grinding Center
ROLLOMATIC CNC 600 X
Suitable to manufacture and regrinding of rotating shank tools
especially small shank tools
Features 8 axis controlled (6 axis machine + 2 axis robot)
Control FANUC 16MB
Software „flutecalc“ + „milling cutter flat, ball, taper“ + „burr“
Tool clamping system collet W15
Unique tool guidance mechanism (prinziple ROLLOMATIC)
Grinding wheel motor with speed control and free direction of rotation
Changeable grinding wheel spindle D= 60 mm
Automatical loadi...
Temperature 90 Degr. C, Make Tool Temp (CH), Type TT 168 E c, . 315-6464-1, Tank capacity 16 Ltr., Motor 12 kW 380 Volt, With temperature controller , Year of construction 2015, With switchgear , Floorspace 0,8x0,4 M, Total height 0,8 M, Weight 100 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature w control: electronically, with digital display and automatic contr...
Here we offer a vacuum glass laminating line with 2 heaters.
Glass laminating plant, with 2 heaters
TOOL-TEMP
Model type TT-138b, S/N 310-1877-1, 310-1877-2
Laminating surface approx. 2,900 x 1,400 mm, with feeding table, stainless steel
Control Panel, surface approx. 2600 x 1,250 mm
Control tower PC, 17 "-LCD monitor ACER"
Model/type AL711, mouse, keyboard
The system consists of the following main components:
Vacuum chamber (Chamber + cover)
Pneum.-cover drive
Transport roller conveyor
Lifting ...
The controller was checked and removed from a device
Szha98yl
New price of the controller approx. 670 €
American connections (USA)
max. 150 PSI
120V / 60 HZ / 1 PH / 10A
Cqblnrqc
6 GAL (Galones) - 22,7 l (Liter)
Power : water 90°C / mould weight up to 1'200 kg
7eiy8kr8g
oil 150°C / mould weight up to 600 kg
Equipment / Additional information:
Pump capacity: 4.5 bar
Cooling: indirectly
Temperature range: up to 150°C
Heating capacity: 6 kW
Cooling capacity: 45 kW at 90°C
Flow control: Yes
Temperature control: MP-888
Temperating machine , Make Tool-Temp AG (CH), Type TT-162 E, . 26-03019-1, Material Mild steel, Working pressure 4.5 Bar, Electric heating , Heating medium: water or oil, Heating capacity 12 kW, With cooling , Capacity 20000 kcal/h at 90 degr C, Temperature Max 150 degr C (Oil) Max 90 degr C (Water) , Tank capacity 16 Ltr, With pump , Capacity 75 Ltr/min, With temperature controller , With control , Year of construction 2004, With switch , Floorspace 0,8x0,3 M, Total height 0,7 M, Weight 60 Kg W...
Refroidisseur TOOL TEMP TT14500H
Capacité de refroidissement : 14 KW
Capacité de chauffe : 6 KW
Capacité de la pompe : max 8,5 bar et max 75 L/MIN
Dimensions : 980 x 660 x 1300 mm roulettes incluses
Poids: 190 kg à vide
Ce refroidisseur à air est équipé d'un chauffage additionnel dans le circuit d'eau avec controle de débit éléctronique. Appareil mobile pour machine individuelle ou groupe de machines
Cbzluh0i
The controller has been removed from a device but has its full function
C3q9u7jp
FERMAT machine tool, s.r.o., Prague / Czech Republic
Fk2zobn
Universal cylindrical grinding machines BHC 63 CNC with cast iron bed * max loop length of 6,000 mm * swing up to 1,000 mm * workpiece weights up to 5,000 kg (with Bezel)-general product description
Machine base made of cast iron
Machines are with control Siemens 840 d sl (828 D sl) or B + R delivered power Panel 900.
Remote Diagnostics free to current warranty and beyond!
CNC Schleifscheibe Abrichtung
Reference visits throughout Germ...
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Bnxo2cb
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
used, fully functional one is sold
Mcrsvjmb
PWB SWISS TOOL PRESETTING DEVICE - TEST DEVICE FOR TOOLS
TMA 21P - MEASURING HEIGHT UP TO MAX. 400mm
MEASUREMENT ELECTRONICS OPERATING INSTRUCTIONS AVAILABLE
As far as we could check the device, it works!
All items offered come from bankruptcy and bankruptcy estate and are set to the best of our knowledge and belief.
As we are not a specialist shop, we ask you to look at the photos and the article description carefully.
Condition see pictures!
S...
Heating medium: R-404 A, Make Tool-Temp AG (CH), Type TT-20000 H/WK, . 98-02754, Electric capacity 13 kW 400 Volt, Temperature +10/+40 Degr C, Year of construction 1998, Mounted on wheels , With switch , Floorspace 1,2x0,8 M, Total height 1,6 M, Weight 400 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlan...
A TT-156 E temperature control unit is available.
Details of the individual devices are listed below.
All devices are supplied with operating instructions.
Type: TT-156 E
Device no.: 93-2640
Capurfam
Power: 10100W
Temp. control: MP-694
This pump was located in a temperature control unit from the company Tool-Temp
Bjljfiz30z
Model TT157E
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
FERMAT HORIZONTAL TABLE DRILLING AND MILLING PLANT - WRFT 130/150/160 CNC *** X: 2.400 mm to 9.500 mm *** Y: 2000 to 6.000 mm and spindle diameter up to 160 mm
The horizontal bench-type boring and milling machine WRFT 130/150/160 CNC offers a new, conceptual machine solution among the large bench-type boring mills with an efficient and powerful headstock. This in turn consists of an extendable stick (travel V) and an extendable spindle (travel ...
138 bar - 8 output lines - flow rate 16 l/min -
motor 3.75 kW - weight 377 kg - 3 phase 400 V -
Blvqz8dp0e
type of coolant oil only
it was fitted to Star SR-20RIII
The single-column turning-boring lathe model 1512 is a universal machine designed for processing a variety of products from ferrous and non-ferrous metals in conditions of small-scale and serial production.
Model 1512 is the most widespread among boring lathes in the territory of the former USSR. The machine allows turning parts up to 1250 mm in diameter, up to 1 meter in height and up to 3200 kg in weight. The machine has been exported to many countries around the world.
The following operatio...
Temperature 90 degr. C, Make Tool Temp AG (CH), Type TT 168 E, . 312-4005-1, Tank capacity 16 Ltr, Year of construction Unknown, With switchgear , Floorspace 0,9x0,4 M, Total height 0,8 M , Weight 140 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Flow control: electronically, with digital display and automatic control of the minimum flow. Temperat...
Type: TT-162 E
Biqowmldgi
Temp. control: MP-694
Sharpening TOOL VOLLMER FINZ 4-800
Md3zx
Location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Cost of delivery
Client cover
startup type
negotiated
Description
Comments
GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
HORIZONTAL PANEL BORING AND MILLING MACHINE - WRF 130/150/160 CNC
to X: 30,000 mm *** Y: 6,000 mm and spindle diameter up to 160 mm
The horizontal CNC boring and milling machine WRF 130/150/160 represents new structural concepts of horizontal panel boring mills on the market. The powerful headstock consists of an extendable stick (travel V) and an extendable spindle (travel W). The WRF boring mills make it possible to achieve extremely high eff...
Diameter of working spindle : 200 mm
Gvvff0
Travel X-axis : 4000 mm
Travel Y-axis : 3150 mm
Spindle speed : 0 - 1120 /min.
Spindle travel - W axis : 1600 mm
Ram travel (V) : 3150 mm
Spindle taper : ISO 50
Travel Z-axis : mm
Clamping area of rotary table : 2000x2000 mm
Max. load of table : 20000 kg
The machine is in good condition, possible to test it.
Rotary table E20.
2 pcs of floor plates 1870 x 6400 mm.
Milling heads.
Contact me for price and more information.
Tempering units
Tool-Temp
Bwvtk39
TT-157 E
year ca2000
Temperature 90 degr.C, Make Tool Temp (CH), Type TT 168 E, . 312-4543-1, Tank capacity 16 Ltr, Year of construction 2012, With switchgear , Floorspace 0,8x0,3 M, Total height 0,7 M, Weight 150 Kg, CE , Extra Specifications Temperature control: self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. Flow control: electronically, with digital display and automatic control of the minimum flow. Temperature rang...
Sharpening TOOL Schonberger NURNBERG TKRS
location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Cost of delivery
Client Cover
startup Type
negotiated
description
Wbirpx82p
Comments
GRINDING AND SAW tape Blades for circular saws and milling Dividing HAVE COMPLETE READY TO WORK
Diameter of working spindle : 160 mm
Travel X-axis : 7000 mm
Travel Y-axis : 2500 mm
Spindle speed : 1 - 1600 /min.
Spindle travel - W axis : 1250 mm
Spindle taper : M100
Main motor power : 75 kW
Machine weight : 46000 kg
The machine is in good condition, still under power.
Including 4 floor plates 1870 x 5580 mm.
Rich accessories: milling heads and rotary table E20.
Contact me for price and more information.
Bex0rndozx
TOOL
BJ 1988
Temp TT 162E
Bdvpmna9ns
86 c.
Temperating machine , Make Tool-Temp AG 9CH), Type TT-137 N, . 29-02921-1, Material Stainless steel, Working pressure 5 Bar, Water heater , Electric heating , Heating medium: (Presurized) water, Electric capacity 12 kW, Temperature Max 160 degr C, Year of construction 2007, Mounted on wheels , With switch , Floorspace 0,9x0,4 M, Total height 0,9 M, Weight 160 Kg, CE , Extra Specifications The TT-137 is a compact and rugged Temperature Control Unit for pressurised water circuits. It provides safe...
Tempering units
Bjyznefvvf
Tool-Temp
TT-150 G
Year ca 1995
Temperating machine , Make Tool-Temp (CH), Type TT-131 N, . 91-6662, Material Mild steel, Electric heating , Electric capacity 12 kW 380 Volt, With pump , Capacity 5 bar max 110 l/min, Motor 1,8 kW, With temperature controller , Year of construction unknown, With switch , Floorspace 0,9x0,4 M, Total height 0,9 M, Weight 160 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide...
Temperating machine , Make Tool-Temp (CH), Type TT-162 E, . 98-14331, Material Mild steel, Electric heating , Electric capacity 13 kW 400 Volt, With control , Year of construction unknown, With switch , Floorspace 0,x,3 M, Total height 0,9 M, Weight 120 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands....
Temperating machine , Make Tool-Temp AG , Type Water Chiller TT-11000/40V2A, . 26-04902-1, Water heater (cooling), Electric capacity 4500 Watt, With cooling (R-134A), Temperature -10/+ 40 Degr.C, Tank capacity 50 Ltr, With pump , Motor 1,5 KW, 220-240/345-415 Volt, With temperature controller , Year of construction "unknown", Mounted on wheels , Floorspace 1,0X0,7 M, Total height 1,1 M, Weight 200 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced pric...
Electric capacity 17,9 kW, Make Tool Temp (CH), Type TT- 380, Tank capacity 15 ltr, . 23-05397-1, Floorspace 1,2 x 0,45 M, Total height 1,2 M, Weight 250 KG, Extra Specifications electrical power 17,9 kW , medium: Heat transfer fluid, CE certified What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit ou...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Photo gallery: the 10 strongest forklift trucks in the world
Photo gallery: The World's 10 biggest excavators
Sell now on Machineseeker! Over 180,000 inquiries per month
