Film unwinding machine, film unwinder; winding and unwinding reel, film band system, unwinding reel.

WIDMANN

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Total height: 1,100 mm Heating/Cooling: available Top: open with loose lid Stand type: frame Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Bjdpfx Ajxqduqsf Eocu Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304)

Year of construction: 1998, condition: good (used), ROTOFLEX R 1300 Slitter / Rewinder Bcjdpoq T Schsfx Af Eju Specifications:  Age: 1997  Width : 13" (330mm)  Unwind shaft diameter: 76mm  Rewind shaft diameter: 76mm, 50mm, 40mm  Location : Germany Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly)

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Bcjdpfx Aeu H R Iqsf Eju Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: excellent (used), machine/vehicle number: 98 0044 10, WITH CUTTING DEVICE Bcsdpfx Afevf Iv Se Eeu

Year of construction: 2025, operating hours: 100 h, condition: new, functionality: fully functional, Maximum jumbo roll width: 450 mm Maximum jumbo roll diameter: 1000 mm Maximum rewinding diameter: 500 mm Bcedpfjvq I Niox Af Eeu One rotary die-cutting unit Die-cutting (roll-to-roll): 120 m/min Compatible with magnetic cylinders from 12" to approximately 24" Optional features not included in the offer price: Magnetic cylinder holder: Adaptable to existing die-cutting units. iKnife Automatic knife positioning system: Available as an additional option. Contact us. We will be happy to provide you with a detailed quotation.

Condition: excellent (used), machine/vehicle number: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM Bodpjvf Iubjfx Af Eocu Equipment / Additional information: With heating Also very interesting for the textile industry

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R Bjdpfxew Tbr Hs Af Eecu -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: used, Aluminum silo with long support skirt Technical specifications / Dimensions Available units: 1 Volume: approx. 105,000 liters Type of vessel: Silo Condition: Used Food-grade: No Design: Upright Internal diameter: approx. 3,000 mm Cylindrical height: approx. 17,525 mm Total height: approx. 18,020 mm Weight: approx. 2,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: Non-pressurized Material / Construction Inner shell material: Aluminum Equipment Support design: Base ring/support skirt Mounting: Fixed Top head type: Conical roof Slope: approx. 15 degrees Bottom head type: Cone Cone angle: 60 degrees Bedpfx Afjtxitcs Eocu Top section: 2 x crane lugs 1 x manhole DN 500 with cover 1 x roof edge railing 1 x flange DN 100 (SiloPilot) 1 x rectangular flange (approx. 1,215 x 835 mm) for filter Shell: 2 x flange DN 32 (min-max indicator) 1 x filling line, leading into the top of the silo and ending at the TW connection at the bottom 1 x access door with ventilation slots (approx. 850 x 2,500 mm) 1 x cable protection conduit Remarks: - The silo ends at the bottom in a 60° cone with flange and extraction box. - The silo has cosmetic defects (brown discoloration, various drilled holes for cable ducts in the support skirt), which do not affect the functionality of the silo. The currently connected measurement and control equipment is included. However, no warranty is given for its functionality!

Condition: used, Year of construction: 2008, Technical data: Working Width: 1300 mm Maximum Speed: 550 m/min Bcodpjxxmr Uefx Af Esu Unwinder Type: Shaftless Maximum Unwinder Roll Diameter: 1000 mm Rewinder Type: Double shaft, center-driven Maximum Rewinder Roll Diameter: 650 mm Minimum Slit Width: 35 mm / 25 mm (optional) Processed Materials: PP, PET, LDPE, HDPE, paper, and laminated materials Knife Types: Blade slitter and rotary knives Control System: Touchscreen HMI with web monitoring and recipe management Additional Features: • Automatic knife positioning system • Shaftless unwinding with hydraulic tilting arms • Laser core guiding for precise and quick setup • Modular design for easy maintenance and access

Condition: good (used), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly work and fast pick-and-place movements. The turboscara SR6 and SR8 are swivel-arm robots (SCARA robots) with four axes and offer the following advantages: • Minimal cycle time with maximum precision • Large workspace and various strokes • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards Bcedohtyyijpfx Af Eou • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; New with BAPSplus: graphical user interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical specifications: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/maximum 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Mounted on an aluminum profile base frame. Item condition: Used The robots were all stored at a major automotive supplier as replacement machines, so they are in very good condition. H1R6D3 Find more items - new and used - in our shop! International shipping costs on request!