Used evaporators for sale (39)

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. Kodpfx Aloip Utasdjdt The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: good (used), Description Brand Eco Refrigerazione Model IDE 43B10 ED ID 555804 Status Active Price 1.300 € + VAT Year of manufacture 2007 Location Oradea (RO) Industrial dual discharge unit cooler Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum airflow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (int./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: -35oC. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date Kjdpfxedxwrpj Aldedt We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Kdodpfxjynkbms Aldet Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: used, Evaporator Goedhart -Type: VCI-42637 Kjdpfx Aozt Sfisldjdt -Cooling capacity: 29.5 kW at (-8/0°C), 20.9 kW at (-25/-18°C) -Fin spinning: 7 mm -Electric defrost -Fans: 2 x 630 mm -Dimensions: 2860 x 920 x 1130 mm -Volume: 38 L -Weight: 342 kg -Quantity in stock: 2 -Reference number: CH 589 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F42 -Cooling capacity: 25.3 kW at DT8, 20.2 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3080 x 930 x 1130 mm -Refrigerant: Freon -Volume: 29.9 L Kjdezt Sczspfx Aldodt -Quantity in stock: 6 -Stock number: CH 615 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: GACA FP071.1H_27 -FN and GACA FP 071.1H_37 FN, overall weight: 443 kg, total length: 4,820 mm, total height: 970 mm, total width: 865 mm, lamellar spacing: 7 mm, volume flow: 39,600 m³/h, cooling capacity: 27 kW (36.71 HP), operating pressure: 16 bar, Use glycol coolers . Worked in logistic vegetable and fruits wharehouse. Also is possible use area heating as convectors using hot-warm glycol received from refrigeration system. 3 fans cooler have 27kW capacity glycol in -5C out-2C. 2fans cooler have 22.7kW capacity with glycol in -5C out -2C Kjdpszk D Rlsfx Aldsdt Selling 4pcs coolers with 3 fans and 5pcs coolers with 2 fans

Condition: used, Evaporator Guntner -Type: S-GHN 071B/27-E -Cooling capacity: 39.7 kW at DT8, 31.5 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3530 x 850 x 1150 mm -Electric defrost -Refrigerant: Freon -Volume: 54 L -Weight: 317 kg -Quantity in stock: 2 -Reference number: CH 606 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work Ksdsza D Ukspfx Aldsdt

Condition: used, Evaporator Guntner -Type: S-GHN 071.2H/27-EHS50.E -Cooling capacity: 50 kW at DT8, 40.2 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3500 x 1060 x 970 mm -Electric defrost Kdodpfxezaz U Io Aldet -Refrigerant: Freon -Volume: 71.5 L -Weight: 387 kg -Quantity in stock: 4 -Reference number: CH 605 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, Evaporator Goedhart -Type: VNS 65407 E -Cooling capacity: 27 kW at -8°C -Fin spinning: 7 mm Kdsdpfoyybd Dsx Aldot -Electric defrost -Fans: 5 x 400 mm -Dimensions: 4200 x 800 x 600 mm -Volume: 44 L -Weight: 310 kg -Quantity in stock: 9 -Reference number: CH 598 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon Kdodpfx Aoyx S Eveldjt -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator GEA KUBA -Type: SGB 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -We have 10 pcs with electric heaters and 7 pcs without heaters -Fans: 2 x 630 mm -Dimensions: 3020 x 850 x 1000 mm -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 17 -Stock number: CH 599 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work Kedpfxjy Endze Aldedt

Condition: used, Two-side evaporator Goedhart Kdsdpey Ifb Njfx Aldst -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm -Volume: 76 L -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Kdodpeygyd Iofx Aldjt Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU).

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg. Kodpfeqrpd Sex Aldsdt