Used Immersion Coolers for sale (1,485)

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Hsdpsfz I N Tofx Ah Hjfp The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Hodpsfz Aw Hefx Ah Hjfp Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET101P3-20 - 2200402790, cooling capacity: 27.5 kW (37.39 HP), type of input current: three-phase, type of cooling: air, overall weight: 637 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Air cooler, chiller, air-cooled water chiller, Type: TAEevo Tech 101 P3-20 Manufacturer: MTA S.p.A. The TAEevo Tech 101 P3-20 is a compact, air-cooled water chiller suitable for outdoor installation (operating range: -20°C to +46°C). Equipment includes oil sump heater, phase monitoring relay, 255-litre buffer tank, integrated P3 circulation pump, and variable speed fan control (winter package). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 27.5 kW Chilled water temperature, outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 4.68 Available pump pressure (bar): 2.54 Ambient temperature (°C): 32 Refrigerant: R 410A Hfsdpfjt Tdvgox Ah Hsp Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 14 Max. current (A): 25 Starting current (A): 123 Protection class: IP54 Dimensions: Length (mm): 1862, Width (mm): 761, Height (mm): 1437 Weight (kg): 637 Connection: Rp 1 1/2" Serial No.: 2200402790 Year of manufacture: 2023 Condition: Visual grade 2, Technically OK Used Price: on request in Euro (plus VAT, ex works Nettetal) Used machines may have visual imperfections due to previous use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: spray head, crane lugs Design: vertical Remarks: Sheet metal cut-outs in the top cover (see photos); 2 each electric immersion heaters (functionality not guaranteed) Speed: 11 / 17 rpm External diameter: 2,680 mm Internal diameter: 2,550 mm Total height: 3,850 mm Heating/cooling: available Insulation: available Power: 2 / 3 kW Agitator: anchor-type agitator Mounting style: height-adjustable feet Location: Bremen Hfodjxqbnbepfx Ah Hsp Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,000 mm Last application: bitumen TANK Number of feet: 4 pcs HEATING/COOLING JACKET Internal temperature control: immersion heaters INSULATION Insulation jacket material: stainless steel FITTINGS Manhole / access dome: on top cover (DN 500) Outlet (alternative specification): 60 mm Note: minor residues, dents on the insulation jacket MATERIAL SPECIFICATIONS Feet material: stainless steel AGITATOR Voltage: 380 Volt Base bearing: Agitator arrangement: off-center in the top cover

Condition: good (used), Charot Immersion tank 1000L immersion tank, insulated jacket, pressure vessel Hfodpfx Ahjqqhhfs Hsp

Condition: used, Aqua’s optimised adiabatic cooling system achieves a perfect balance between load, water usage and fan speed. The innovative control management system engages the water spray only when absolutely necessary. This ensures maximum water evaporation with minimum water wastage. In addition, all spray pipework is constructed in stainless steel rather than plastic, eliminating any risk of corrosion. The coil is protected with a hydrophilic coating. Adiabatic coolers are low-maintenance, cost-effective, and environmentally friendly options for temperature control at your facility. They are a popular alternative to cooling towers and are used in situations requiring water temperatures of 25˚C and above. Hjdpfx Ajwv Raajh Hefp

Condition: like new (used), Temperature range (°C) -15 to 40 Cooling power (W) Hfsdpfelnbh Tox Ah Hjp at 20°C 400 at 0°C 320 at -10°C 170 Overall consumption (VA) 500 Dimensions (d/w/h, mm) 460/305/225 Weight (kg) 21 Flexible pipe (l, mm) 925 Coil (Ø/l, mm) 77/55 Electrical supply 230 V (50Hz) Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 1984, - 6 rows of bottle cages - WITHOUT OZONE GENERATOR Hedpfx Aoralr Hsh Hsfp - Machine in working condition - Machine available immediately - Video available on request

Condition: excellent (used), Year of construction: 2011, Thyssen Krupp Gerlach conservation basin Complete execution of the plant in stainless steel with heating Year of construction 2011 Dimensions: HxLxW= 100 x 556 x 83 cm Hfodsihpbyopfx Ah Hjp More conservation pools in other sizes- new and used - you will find in our store! International shipping costs on request!

Condition: used, Immersion heater Hfsdpfob A Iavsx Ah Hep -Power: max. 2000 W -Step switch: 12 positions -Body: made of aluminum -Connection: 230 V -Weight: 5 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M Hsdpfx Aorzq Arsh Hjfp PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: new, TECHNICIAL SPECIFICATIONS: It can be manufactured from 304ss or 316ss Stainless material in accordance with the preferred surface treatment. The tank side walls are insulated with 50mm glass wool. The tanks that require heating can be produced with serpentine or electric heating. Temperature control is done digitally and follow-up is provided. If necessary, an air mixing device is added to the tanks. In the tanks, stainless ball type valves are used for discharge. WORKING PRINCIPLE: It is based on the principle of surface cleaning and processing by taking the material to be surface cleaned into the baskets as a general application and immersing it in tanks with chemical and / or water by means of a crane and waiting for a while. The aim is to clean the existing oil layer on the metal surface and create a thin film on the metal surface, thereby making the material more conducive to paint and more resistant to external factors. APPLICATION AREAS AND ADVANTAGES: Automotive sector, White goods sector, Lighting sector and General machinery manufacturing sector are facilities that do not require continuous production or provide high and equal quality with less labor in facilities where alternative solutions are not available due to the shape and size of the material or very high capacities are not reached. Chemical values ​​and temperature values ​​can be monitored and controlled by applying automation optionally. APPLICATION: Immersion type surface cleaning applications vary according to preference and required strengths for each sector. As two main applications show: - iron phosphate surface treatment - zinc phosphate surface treatment Apart from these, only applications for cleaning and oil removal can be made. There is an option additional to the immersion tank: * a drying oven * 2 stainless steel baskets Hjdpfjfw N Rtsx Ah Hsfp DRYING OVEN: Generally, the working principle of drying ovens, which is the last step of immersion type surface cleaning units, is like BOX type ovens, however, in order to be suitable for immersion type surface cleaning facility, the parts of the lid are designed on the top side of the oven and the surface cleaning parts are dried in the same basket. In this type of drying system, the parts enter the drying oven and are ready for paint application after drying.

Condition: used, Overall dimensions: 1720 x 1100 x 1600 mm Hjdpfei Arlhsx Ah Hjfp Tank size: 1200 x 600 x 1400 mm Weight: 248 Kg Material: Acid resistant It is equipped with a connection suitable for filling and draining (ball valve), and a pneumatic (electric) valve serves to aerate the tank.

Condition: used, functionality: fully functional, Linear blancher made of stainless steel with sheets to keep the whole product under the water. EQUIPPED WITH: Plantform. Steam inlet valve. ELEVATOR DIMENSIONS: Total length: 6m Total width: 2m Discharge height: 6 m Working width: 62cm Distance between paddles: 25 cm Paddle height: 7.5cm PRE-BLANCHER DIMENSIONS Total length: 6.85 m Total width: 1.70 m Total height: 2.60 m Working width: 85cm Paddle height: 28.5 cm. Hjdpfx Ahjwny Hto Hefp BLANCHER DIMENSIONS: Total length: 8.85 m. Total width: 1.70 m Working width: 85cm Paddle height: 28.5 cm. COOLER DIMENSIONS: Total length: 12.30 m Total width:1.70 m Total height: 3.57 m Discharge height: 2.60 m

Condition: used, Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm Hfodpfx Asdkx Syoh Hop -Weight: 9 kg

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Manufacturer: Brinkmann-Pumpen D-5980 Hsdpfx Ahovgwqhe Hefp Type: TC250/720 Overall dimensions: 1180 x 230 x 290 mm Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute

Condition: used, Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan Hjdpfjcx T E Iox Ah Hsfp -Dimensions: 420/120/H650 mm -Weight: 32 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 32,200 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in 2022! TECHNICAL DETAILS Travel Distances X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Work Area Distance between table and spindle nose: 150–650 mm Table dimensions: 1,100 × 600 mm Spindle Max. speed: 24,000 rpm Power: 29 kW Tool holder: HSK-A63 Feed Rates Feed rate max.: 20,000 mm/min Rapid traverse (X/Y/Z): 20,000 mm/min Tool Magazine Tool magazine: 20 tools Performance & Precision Total power consumption: 47 kVA Hfodpfoxtnv Dox Ah Hsp Positioning accuracy (X/Y/Z): 0.004 mm Repeatability (X/Y/Z): 0.002 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Dimensions & Weight Machine dimensions (L × W × H): 3,010 × 3,716 × 3,100 mm Machine weight: 11,000 kg Operating hours: approx. 32,200 h EQUIPMENT XYZ telescopic cover Direct torque limiting coupling Cooler, 1°C above ambient temperature in the workshop Chip conveyor Electronic handwheel Tool length probe HH TS 120 Documentation

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel Hjdpfxexup T He Ah Hefp 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: used, Complete Wheats Breakfast Cereal Production Line 3.5 tonnes per hour capacity Product Size : 1 inch by 1 inch biscuit Max design rate 86 ton per day but client has been running at 40 tonnes per day. Multiple product capability Multiple toppings from chocolate to sugar Capable to work with paste Equipment Includes 2x 1,000 ton Silo SEW-EURODRIVE Screw Conveyor System Buhler MTRB Grain Separator Donaldson Torit 2DF12 Dust Collector Stainless Steel Industrial Washed Wheat Receiver Cox & Plant Vibratory Conveyor System 2x Conditioning Screw Conveyors Buhler UBKXD210/35s Bumping Mill 3x Winkworth E300 Industrial Mixers Ingredients loading System CEIA THS/MS21 Metal Detector and Vibratory Conveyor Coperion LHS400 Industrial Continuous Cooker/Processor Screw Conveyor System Fitz Mill Industrial Cooler 3x Industrial Stainless Steel Screw Conveyor Systems 16x Sasib 103a Shred Mills Industrial Conveyor System Industrial Food Processing Conveyor System Meyer Vitech Accuflex Industrial Food Processing Machine Alpha Stainless Steel Jacketed Mixing Vessel 2x Lapping Machines Hjdpfjxt H D Tox Ah Hjfp Depositor Longitudinal Cutter Transversal Cross Cutter Cooling Conveyor Speeder Natural Gas Oven Cooling Tunnel Frosting Holding Tank 2x Tourell Gardner 700L Jacketed Mixing Vessels Conveyor Belt System DSU Unit 4x Ishida CCW-S-210 Multihead Check Weigher and Bagger Bag transfer conveyor R.A. Jones Industrial Case Packaging Machine Mettler Toledo Safeline Metal Detector Mettler Toledo XS3 Checkweigher Smurfit Kappa Automated Packaging Machine Markem Imaje 5800 Thermal Inkjet Printer Industrial Conveyor System

Condition: good (used), Year of construction: 2010, Matsuura MAM72-35V PC32 5 Axis Multi Pallet Loading Vertical Machining Centre With G-Tech 30i Control Maximum Component Dimension Ø350 x 240mm High. Maximum Pallet Load 60kg. Maximum Workpiece Dimension Ø350mm x 300mm High. Axis Travel 'X'=550mm, 'Y'=440mm, 'Z'=580mm, 'B'= +65/-125°, 'C'=360°. Rapid Traverse 'X,Y,Z'=60m/min, 'B'=50rpm, 'C'=100rpm. Maximum Maxia Spindle Speed 20,000rpm (11/15kW Motor). Spindle Taper BT40. 240 Position ATC. Maximum Tool Ø80mm (Ø150mm Non Adjacent Tool). Maximum Tool Length 260mm. Maximum Tool Weight 8kg. Tool Changing Time Tool to Tool 1.7sec. S/No. 18082 (2010). Hjdpfxjxvz Tbs Ah Hofp With Renishaw NC4 Laser Tool Measure and Breakage Detection Probe, Renishaw Spindle Inspection Probe interfaces, Auger To FSE Chip Conveyor, Filtermist FX4000 Mist Extraction Unit, SMC IDF8E Air Dryer, Daikin AKZ567 Oil Cooler, FSE Through Coolant System, Axis Scale Feedback, Visiport Spin Window, Signal Tower, Oil Skimmer, Wash Gun & Manuals. Note: Tooling Not Included. Note: Spindle Drive Needs Attention, Spindle Seems Free Running, Possibly Motor Needs Inspection.

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY VM1050H FANUC 0IMF1 VERTICAL MACHINING CENTRE YEAR OF MANUFACTURE - NEW - BUILT 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS AIR GUN SPINDLE AIR BLAST SPINDLE PROTECTION AIR CURTAIN 24 STATION ATC TOOL MAGAZINE CHAIN TYPE CHIP CONVEYOR WITH CHIP BOX FANUC 0IMF 1 WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY MANUAL PULSE GENERATOR (MPG) COOLANT FLUSHING SYSTEM COOLANT GUN FRONT DOOR INTERLOCK Hfsdpsxtfxcsfx Ah Hep FULLY ENCLOSED SPLASH GUARDING SYSTEM TELESCOPIC SLIDEWAY COVERS LED WORKING AREA LIGHTING SYSTEM PATROL LIGHT (3 COLOUR) AIR CONDITIONING IN ELECTRICAL CABINET BASIC MACHINE INSTALLATION PARTS CE STANDARDS MACHINE CONFIGURATION CENTRALIZED AUTOMATIC LUBRICATION SYSTEM MACHINE MANUALS & OPERATOR HANDBOOKS STANDARD ACCESSORIES TRANSFORMER (415V, 3PH, 50HZ) BELT DRIVE SPINDLE - 8,000 RPM #40 TAPER WITH OIL COOLER SPINDLE MOTOR FANUC 11.0 / 15.0 KW MACHINE TYPE, CONSTRUCTION & FEATURES  HEAVY DUTY CAST IRON CONSTRUCTION  COMPACT DESIGN  PRE-LOADED BALLSCREWS  HIGH PERFORMANCE LINEAR GUIDEWAYS – X / Y / Z MACHINE SPECIFICATION Worktable Travel (X Axis) 850 MM Saddle Travel (Y Axis) 520 MM Spindle Travel (Z Axis) 560 MM Distance from Spindle Nose to Worktable 150 ~ 710 MM Distance from Spindle Centre to Column 580 MM FEEDRATES X Axis Rapid Traverse Rate 36 M / MIN 3 | Page Y Axis Rapid Traverse Rate 36 M / MIN Z Axis Rapid Traverse Rate 36 M / MIN Cutting Feed Rate 10 / 10 / 10 M / MIN ACCURACY Positioning accuracy (X / Y / Z) 0.008 / 0.008 / 0.008 MM Repeatability (X / Y / Z) 0.005 / 0.005 / 0.005 MM WORK TABLE Table Size 1,000 x 520 MM Max. Table Load 650 KGS T-Slots - Width 18 MM SPINDLE HEADSTOCK Tool Shank BT40 [BBT40] [CAT40] Pull Stud P40T-1 (MAS403) Spindle Speeds 8,000 RPM Max. Output Torque 70.0 / 96.0 NM Spindle Motor Power 11.0 / 15.0 KW AUTOMATIC TOOL CHANGER Number of Tools 24 Tool Shank BT40 Max. Tool Dimensions Ø 80 x 300 MM x 8.0 KGS Tool Exchange Time 1.5 SEC MISCELLANEOUS Power Requirement 25 KVA Power Supply 415V / 3PH / 50HZ Compressed Air Consumption / Pressure 280 L / MIN / 6 ~ 8 BARS Machine Dimensions (L / W / H) 3,680 x 2,480 x 2,850 Machine Weight 5,500 KGS

Condition: used, Year of construction: 2013, operating hours: 12,345 h, functionality: fully functional, machine/vehicle number: 12345678, Balfor 40 t horizontal large log splitter. Splitting chamber 3m. 2 way 4 way hydraulic adjustable splitting knife. Dual hydraulic pump. Temp controlled oil cooler. Can operate in manual or full remote control modes. Videos available on request. Complete with drawbar and axle. Hfedpfxsxp Uzrj Ah Hep

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Hfodpfxexrb Evs Ah Hep

Condition: excellent (used), Year of construction: 2018, Doosan PUMA VTR 1620M CNC Vertical Turning Centre With Doosan FANUC i-Series Control Maximum Swing Ø2,100mm. Maximum Turning Ø2,000mm. Recommended Turning Ø1,600mm. Maximum Turning Length 1,800mm. Maximum Table Load 10,000kg. Axis Travel 'X'=-800 To 1,000mm, 'Z'=1,200mm, 'W'=840mm (3 x 240mm Steps), 'C'=0.001° (Minimum Indexing Angle). Rapid Traverse 'X'=12m/min, 'Z'=10m/min. Ram Dimension 260 × 260mm. Spindle Speed 300 rpm. Spindle Motor Power 45/37kW. Spindle Torque 20,557Nm. Maximum Milling Tool Speed 3,000rpm. Ram Milling Tool Power 15kW (20 hp). Tool Turret Capacity 15 Tools. Maximum Turning Tool Length 500mm, Maximum Milling Tool Length 350mm, Turning Tool Shank 32 x 32mm, Boring Bar Sleeve Ø100mm. S/No. MT0055-000025 (2018/10) Hfsdpfx Ajxvzzlsh Hsp With Dual Chip Conveyors, Profluid High Pressure 0-70bar Coolant Filtration System, Losma Icarus Mist Extraction Unit, Kwangrim Oil Cooler, Hand Wheel, Signal Tower, Maintenance Access Ladder With Platform, Staging & Manuals. Machine Dimensions L6,500 × W4,240 × H6,303mm. Machine Weight 40,000kg. Note: No Tooling Included. Please note: Machine must be removed by Jan 2026.