Used Condensate for sale (951)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Dkedpfx Aoz Itlwja Iju Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Year of construction: 2019, condition: good (used), Zanotti Uniblock GCU5150B2B9E2L Horizontal condensing unit Dsdpfx Aszvli Hea Ioku 2019, four fan unit, see plate for full spec, 3Ph

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Dsdpfx Aaoz Ndazo Ijku Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)

Year of construction: 2014, condition: used, This listing is for a Mueller PyroPure P4003 Pure Steam Condensing System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's- Product Overview: The Mueller P4003 is a high-capacity pure steam condensing system, part of the trusted PyroPure series. Designed for pharmaceutical manufacturing, this system produces pyrogen-free and endotoxin-free water-for-injection (WFI) by condensing pure steam. Built to meet or exceed U.S. Pharmacopoeia (USP) standards for WFI, as well as CE marked and FDA compliant with 3.1B material certification. It is a versatile solution for facilities requiring both pure steam and WFI quality distillate. Its robust design and advanced features ensure reliable operation, compliance, and minimal maintenance. Key Specifications: Model Number: P4003 Capacity: 100 gallons per hour or 379 litres per hour of WFI-quality distillate. Pure Steam Inlet: 807 pounds per hour or 366 kilograms per hour. Coolant Requirement: 978 gallons per hour or 3702 litres per hour. Pure Steam Output Compliance: Pyrogen-free and endotoxin-free, meeting USP WFI standards. Core Features High-Quality Output: Produces pyrogen-free steam and WFI-quality distillate, ideal for pharmaceutical-grade applications. Utilizes a tangential nozzle design for optimal impurity separation in the pure steam generator. Dedpfjxv Agcjx Aa Ieku Efficient Design: Fully drainable components eliminate contamination risks and ensure clean operation. Electro-polished 316/316L stainless steel with a maximum surface roughness of 20 Ra for all product contact areas. USP Class VI-certified elastomers for enhanced safety and regulatory compliance. Ease of Maintenance: Removable tube bundle in the condenser allows for easy cleaning and inspection of critical surfaces. Requires only 24 inches of clearance on all sides for service and maintenance. Minimal instrumentation with just one control loop simplifies operation and reduces potential downtime. Installation Flexibility: Can be integrated with a PyroPure pure steam generator for dual production of pure steam and WFI. Optional stand-alone design for remote installation at the point of use, adding versatility to your setup. Applications: Pharmaceutical Manufacturing: Sterile environments, autoclave processes, and critical cleaning procedures. Biotechnology: Providing WFI for sensitive biological processes. Healthcare: Humidification and sterilization in clean rooms or hospital sterilization units.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: EF2UA23105068402, This is an UltraVent condensation hood from the premium manufacturer Rational, type UV 202E. This hood can be used with iCombi appliance sizes 20-2/1 in an electric version. Thanks to the condensation technology, the UltraVent binds escaping vapors. An external connection or the extension of an existing exhaust system is not required for this recirculating hood. The hood has been inspected in our in-house workshop and is fully functional. The stated price is the gross price, including 19% VAT. The recommended retail price for this hood is €7,233.00 net. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our appliance service for you: 6-month warranty on all electrical parts High-quality branded appliances at fair prices Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: External dimensions WxDxH: 1084x1134x337mm Electrical connection: 1NAC 230V 50Hz 0.16kW Serial number: EF2UA23105068402 Djdpfezu R Ufex Aa Ioku Year of manufacture: 2023 Maximum extraction rate: 705 m3/h Operating noise: Average: 50-65 dB(A) Condition: Used, inspected, and fully functional. SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC), which can be found at the link "Legal Information".

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Dkodpeidx Uiofx Aa Iju Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts and optional external network connection. ● Optimized cleaning by comparing input/output, which extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heater. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in different sizes – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2010, condition: good (used), Güntner GVX 071V.1A/3-ED.E Axial fan condenser Fan: 500 mm diameter Number of fans: 3 Djdpfxjpgrars Aa Ijku Extra-quiet design Voltage: 400 V 3~ 50 Hz Year of manufacture: 2010 Max/Min pressure: 32 bar/-1 bar Max/Min temperature: -50 to +100 degrees Volume: 29 liters Rated power: 42 kW Air volume flow: 15000 m³/h Weight: 326 kg Overall dimensions, approx.: L: 410 cm, W: 110 cm, H: 125 cm Item condition: used You can find more condensers – new and used – in our shop! International shipping costs available upon request!

Condition: used, Bitzer LHV7E/4CE-9F3Y-40S Condensing Unit Bitzer Ecostar condensing unit, with integrated frequency inverter, duel speed controlled EC fans, cooling capacity approx 32Kw, 3Ph Dkedpfx Aaszvlnpo Ieu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 Dksdpexyungefx Aa Isu SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2020, Daikin ERQ200A7W1B Condensing unit Dedpfx Asu U Iyqsa Ioku Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph

Condition: excellent (used), MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing Unit suitable for refrigeration applications Typical applications include: Freezer chests in supermarkets and convenience stores Cold storage warehouses Beer cellars Milk cooling systems Standard features: Copeland Scroll M compressor ZB series with sound-dampening shroud Oil sump heater Liquid receiver with burst protection Filter drier Dkedsvtl T Dspfx Aa Iou Sight glass visible from the outside Ball shut-off valves Component-tested combined HD/ND safety pressure switch Electrical equipment: Control box IP 55, compressor contactor, DIN rail mounting Condenser is integrated and protected within the housing Condenser fins coated with epoxy resin phenol (gold lacquer*) High-quality housing: solid construction in 1.5 mm galvanized and powder-coated steel sheet, base plate and feet in 2 mm steel sheet Frame construction with individually removable panels; all screws and components are easily accessible from the front with minimal effort Riveting nuts with locking screws for secure, long-lasting fastening without rust problems; pressure-controlled speed controller with EMC filter Space-saving mounting of multiple units side by side possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit type: MyRef -ZB26-TFD Installed compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dB(A) @ 10 m Receiver volume: 6 liters Airflow: 4500 m³/h Refrigeration capacity: 9 kW Voltage: 400V, 3-phase, 50Hz Current consumption: 8.9 A Dimensions: H x W x D: 715 x 1120 x 450 mm Weight: 102 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), functionality: fully functional, REFRIGERATION UNIT: CARRIER Unit with Wilo circulation pumps + external condenser. Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Djdpjz Aa Rxofx Aa Isku Mon-Fri: 8:00-16:00 Sat: closed

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Transpak TP702, arch 650x500, 8mm strapping, adjustable tension via potentiometer, automatic strapping feed and ejection, optional anti-condensation heater, activation by foot pedal or button, speed: 55 cycles per minute. Djdez Ea Dbepfx Aa Isku

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,432 kg, total length: 9,215 mm, total height: 2,391 mm, total width: 2,200 mm, volume flow: 369 m³/h, cooling capacity: 1,566 kW (2,129.16 HP), NEW PROFROID aircooled condenser Rated capacity at 45/35C°, R407f = 354 KW Dkodpfx Asyyvwlea Iju 6 x fans 910 mm diam. Coils anticorrosion treated w. Heresite

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Dkedpeygyd Isfx Aa Iou Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU).

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Dsdjvllxdepfx Aa Isku Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: as good as new (ex-display), Güntner GCVC RD 080.2 Industrial Gas Cooler / Air Cooler / Condenser, Used Equipment Technical Data: Gas Cooler / Heat Exchanger (Güntner GmbH & Co. KG): Manufacturer: Güntner GmbH & Co. KG Type: GCVC RD 080.2/12-51-4252820M Year of Manufacture: 2017 (Test Date: 28/07/2017) Dksdpfx Aaez Hzfvj Iju Internal Volume: 14.31 litres Maximum Permissible Pressure (PS): 41 bar Test Pressure (PT): 45.1 bar Permissible Medium Temperature Range (TS): -50 °C to +100 °C Factory Serial No.: 504029474/30.00094 Project No.: 101052309 Fan and Drive (Ziehl-Abegg): Manufacturer: Ziehl-Abegg (Germany) Type: VT01445U.1 / MK152-ZIK.17.UA Rated Power: 4.1 kW Supply Voltage: 3~ 380–480 VAC, 50/60 Hz (8.8–5.2 A) Rated Speed: 1045 RPM (Current Consumption: 3.6 A) Control and Equipment: Factory-installed Güntner digital display control unit / electrical control box Industrial-grade protection and robust frame construction Overall Dimensions: Width: 3020 mm Depth: 810 mm Height: 1330 mm Installation Dimensions: Width: 2860 mm Depth: 650 mm Height: 1160 mm

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 245988600001002, nominal power: 378.4 kW (514.48 HP), total length: 6,900 mm, total width: 1,100 mm, total height: 2,300 mm, type of cooling: air, Brand new Lu-ve EAV80-90 air-cooled condenser for Freon. We can supply this condenser with matching fans. The condenser block has minor transport damage. The condenser has a capacity of 378.4 kW at an air flow rate of 80,000 m³/h. Specifications: Brand: Lu-Ve Model: EAV80-90 Product type: air-cooled condenser Capacity: 378.4 kW (based on an air flow of 80,000 m³/h) Number of fans: 6 Refrigerant: Freon Djdpfsx A Ta Tsx Aa Isku Surface area: 716.1 m² Dimensions: 6900x1100x2300 mm (LxWxH) Weight: 1047 kg Year of manufacture: 2024

Condition: ready for operation (used), Axial Fan Condenser Water Cooler Pressure tested, ready to use. Located Locally in: Hungary (EU) Dodszhg Alopfx Aa Isku

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Dkedpfsz Ik Aaox Aa Iou Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: used, Condenser Guntner Dodpoxg Na Djfx Aa Isku -Type: GVH 082B/2x4 ND -Cooling capacity: 620/490 kW -Number of fans: 8 x 800 mm -RPM: 900/700 -Dimensions: 6980 x 2380 x 1880 mm -Quantity in stock: 1 -Stock number: SK 168 -Condition: Used in very good condition

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). Dkjdpfsz Iy Hzex Aa Iju The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Condition: used, Condenser Guntner -Type: GVH 090.1B/2x4-S(D) -Cooling capacity: 477 kW / 399 kW -Number of fans: 8 x 900 mm -RPM: 440/350 -Dimensions: 9700 x 2290 x 1850 mm -Volume: 218 L Dkjdpsxg Nhbofx Aa Iou -Quantity in stock: 1 -Stock number: SK 169 -Condition: Used in very good condition

Condition: ready for operation (used), Axial Fan Condenser Water Cooler Pressure tested, ready to use. Located locally in: Hungary (EU) Djdjzhg Izopfx Aa Ieku

Condition: excellent (used), -Multifunctional machine: -PASTEURIZES - COOKS - MIXES - EMULSIFIES - Model: R400 A SH - Dimensions (LxWxH): 600x750x1335 mm - Tank capacity: 40 litres - Maximum water pressure: 0.6 MPa - Refrigerant gas: R404A - Voltage: 400V / 3PH / 50Hz - Serial number: 179342 Dksdjwxu Rzjpfx Aa Iju - Year of manufacture: 2015 - Electronic controls - Semi-hermetic compressor - Air-cooled condenser - Refurbished equipment: The equipment is prepared when ordered; collection and return deadlines are agreed at the time (please request the price after refurbishment). The listing was translated automatically. Translation errors are possible