Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Dcebovwf N Ho Hl Ak Iog

Condition: used, length: 1.800 mm width: 1.100 mm height: 1.200 mm division: 32 mm Number of drills: 26 engine: 1,5 kW Dcsb Hjt Sbc Iol Ak Ieg Gannomat hole drilling machine for drilling dowel holes or rows of holes in workpieces.

Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, Drilling depth 130 mm Drilling width 300 mm Two-jaw drill chuck 2-20 mm Dcobovt Smqs Hl Ak Ijg Table size 800x200 mm Foot switch for clamping cylinder (pneumatic) Height and depth limitation pneumatic Hand feed lever with on and off switch Stops for long hole drilling Raster shaft Main switch with motor protection and CCE plug Chassis Drilling in 2 levels with one clamping

Condition: like new (used), Functionality: fully functional, Electronically controlled dowel hole drilling and driving machine BS 5102-V Condition: As good as new, newly painted, 1 year warranty. The BS 5102-V is the ideal machine for all face drilling. It can either drill or drive in dowels, but develops its full performance when both are done at the same time. The amount of glue can be precisely dosed via the PLC control, which ensures maximum flexibility and minimum set-up times. Equipment: Controlled X-axis with machine stand as workpiece support. X-support via linear guide and rack and pinion drive with servo motor. Including drilling motor, gluing device and dowel insertion device. Drilling depth and dowel projection can be adjusted directly on the drilling support. Safe workpiece clamping mechanism with a clamping portal, equipped with 4 adjustable clamping cylinders that press the workpiece precisely against the stop edge. Clamping cylinders can be controlled alternatively or together in two groups. Stop rulers are mounted on the left, right and center of the machine table to increase the workpiece support surface. Control system: PC with Siemens PLC control and dialog-oriented programming via WP-Studio. Windows 10 operating system with graphical support on a 17" color screen. Separate workpiece programs for left and right control panel, which can be automatically mirrored. Glue quantity specifications can be stored in each program. Technical data: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: min. 15 mm / max. 60 mm Vertical stroke of the support: 7.5 - 50 mm Min. lateral drilling distance: 10 mm Clamping cylinder: 4 short-stroke cylinders (63 mm Ø, inclined clamping) Drilling unit: 9,000 - 18,000 rpm, adjustable, 1.5 kW Drilling depth: max. 45 mm Drill holder: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min. Dowel dimensions: 8 x 30/50 standard, according to DIN 68150, form A Spiral feed capacity: 3.5 ltr. Glue system: 1:1 diaphragm pump, max. 7 bar Suction connection: 80 mm Ø, required suction air volume: 540 m³/h at 30 m/sec. Voltage: 400 V, 50 Hz options: Djb Hl Akeunvg Tj Iscg Y-axis for automatic adjustment of the drilling and gluing unit. Electronic glue monitoring, which ensures that glue flows during the process. Additional drill motor for surface-side drilling. Technical data for surface-side drilling motor: Drill motor: 1.5 kW at 18,000 rpm, 1-spindle Speed: 9,000 - 18,000 rpm adjustable Drill feed: pneumatic Drilling stroke: max. 25 mm Drilling depth limitation: via spindle and siko display Distance to reference edge: min. 5 - max. 35 mm Drill holder: M10 external, max. diameter 35 mm Workpiece length: min. 70/90 mm (part width) This machine combines state-of-the-art technology with easy handling and high power reserves, ideal for demanding woodworking applications.

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, drilling depth: 70 mm, input voltage: 400 V, workpiece height (max.): 65 mm, input frequency: 50 Hz, power: 1.47 kW (2.00 HP), The FD 921 is equipped with 21 drilling spindles in a 32 mm grid. Drills up to Ø 35 mm can be used to drill dowel holes, row hole drilling and cup hinges. The large table made of gray cast iron, side stops, pneumatic workpiece clamps and ergonomic controls make the FD 921 a top-class dowel drilling machine. Further technical data: Number of drilling heads: 21 (11 right-hand, 10 left-hand) Axis distance between the drilling heads: 32 mm Djb Hl Akovyd Its Iocg Max. workpiece size: 850x3000 mm Required air pressure: 6-8 bar Accessories: 11 tool holders with 5 mm dowel drills, right-hand cutting 10 tool holders with 5 mm dowel drills, left-hand cutting

Condition: new, Semi-automatic drill - Precise lifting frame for accurate drilling results and hard requirements - stepless drilling stroke adjustment with automatic return stroke via limit switch - Two-hand safety control - Horizontal and vertical workpiece clamping via foot switch - Automatic or manual operation - Position-accurate adjustment in the Y-axis - Support table right/left with scale and folding stops We will be happy to provide you with an offer tailored to your requirements. Dceb Hl Akjd Rhy De Ieg

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Dcsbjvwgags Hl Ak Ieg Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Engine: 1.1 kW // 2,700 rpm. Deb Hl Ajlfcnwjk Iecg * Foot operation.

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) Dcsb Hlevnq Txj Ak Ijg - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: new, Multi-spindle groin drilling machine Number of drilling spindles, clamping devices, etc. depending on customer requirements spindles can be controlled individually at your speed. Dob Hled Rhx Se Ak Iecg We will be happy to provide you with an offer tailored to your requirements.

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Dobevwf H Ej Hl Ak Ijcg

Condition: used, table width: 1.080 mm Dcsb Hljtuv Iyo Ak Iog division: 32 mm Hole drilling machine or dowel drilling machine Dübelfix for drilling dowel holes or rows of holes in workpieces. Table width: 1,080 mm Pitch: 32 mm

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Dcjb Hlovwf Dqe Ak Ieg

Condition: used, Support table: 300 x 37 cm Deb Hljlfcnto Ak Ijcg Engine: 1.6 kW engine: 1,6 kW MAW BEV electric pneumatic cup band drilling machine for drilling cup bands or fittings.

Condition: used, Year of construction: 1994, weight 450 kg Dsb Hl Aevwft Ejk Iocg Dimensions (L,W) 1100x1100x1200 mm with stop system r - lwith pneum. drill feed and chipping devicewith multi-spindle drill head with 8 drill spindlesused, top condition, top equipment, many accessoriesmake Hoffmanntype HR 150 Pyear of construction 1994machine no. 16002work piece support right left swivelingdrill holder shank chuckadapter plate for drill head holderdowel drilling device rasterwork piece stopcenter stop2 pcs. stop ruler 2100 mm with folding stops pcs. 4 - r leftpneumatic strokedigital displaysautomatic feedworkpiece clamp pneumatic 2new price approx. 18.000,00 €suction connection D 80 mmspace requirement approx. 1100 mm x 1100 mm x 1200 mmweight approx. 450 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty

Condition: like new (used), Shank: 8 mm diameter: Mainly 5.8 & 4.5 mm Quantity: 30 pieces material: HSS Dcob Hevbhaiel Ak Isg

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Dsb Hl Aovwfr Iek Iecg

Condition: used, Spindle mount: MK 2 Connected load: 750 W // 400 V // 50 Hz Drilling performance: 25 mm Dcsb Hot Rmbyel Ak Iog

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Dsb Hl Asvwfrzsk Iscg

Condition: used, Working width: 720 mm working width: 820 mm Dceb Hl Akolfcn Ej Isg Max. passage: 45 mm Max throughput: 120 mm Drilling depth vertical: 45 mm, horizontal: 120 mm

Condition: used, used, good conditionmake Ayentype D-41HAmachine no. 52396motor 0.75 kWnumber of spindles 4 pieceswall-mounted machinespace requirement approx. 1000 mm x 300 mm x 800 mmweight approx. 70 kgtotal connected load 0.75 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Dcjb Hl Akjvwfrbj Iog

Condition: used, Year of construction: 1980, second hand Make Scheer Dsb Hl Akovwfuvj Iecg Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Number of drilling beams 1 drilling from below pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Weight approx. 300 kg Total connection value 2.2 kW Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: used, usedmake Rapidnumber of spindles 3 pieceswall machineupright projection approx. 500 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Dsb Hl Aevwfmrek Ijcg

Condition: new, - NEW -Standard equipment:Motor 1.5 kWSpindle speed 2880 rpmMax. Spindle height above the table 160 mmMax. Drilling stroke 345 mmMax. Cross stroke 245 mmSpindle stroke 160 mmDrilling capacity 0-20 mmMax. Tool length 175 mmEccentric clamp 1 pcRotatable machine table 800 x 400 mm /- 45°Pivotable / rotatable drilling unit as optionTiltable machine table as optionMachine dimensions 1500x1100x950 mmMachine weight 345 kgincluded:- Suction nozzle no. P41 55- 2nd clamping eccentric no. P41 25- Dowel drilling device with 4 grid dimensions no. P41 20- Single lever operation- 2 speeds 1.5/1.9 kW 1440/2880 rpm no. P41 07- Digital display of spindle / drilling height no. P41 34 Djb Hl Ajvwflzek Iocg

Condition: used, Year of construction: 1995, with pneumatic stroke for drilling on 2 levelswith rotatable drilling unitused, good condition, top equipmentmake Hoffmann-Dübelfixtype DBL T 142year of construction 1995Masch.-Nr. 1342CE type approvedmotor 1,4 / 1,8 kWworkpiece support swivels to the rightdrill chuck 20 mmdrilling depth 190 mmdowel drilling unit with 1 piece grid 12 mmworkpiece stopmotor speed 2 pieces 1400/2850 umatic strokedigital displaysaggregate rotatable / swiveling 63° - o - 63°workpiece clamp pneumatic 2 piecesline lasernew price approx. 17.000,00 €space requirement approx. 1400 mm x 1200 mm x 1400 mmweight approx. 400 kgstorage place 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout warranty and guarantee Dcjb Hl Aovwfg Sek Ijg