Miscellaneous

Autobox SC 360 Cartoon Cutting machine

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unilog 4000 Closing force 60 tons Year of manufacture 1997 Ndodjg Emvhepfx Aqwoa Screw diameter 30 mm Shot weight approximately 90 g

Year of construction: 2008, condition: ready for operation (used), A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Ndodpfx Aswgc Aheqwja

Condition: used, Year of construction: 2023, functionality: fully functional, total height: 1,800 mm, input voltage: 400 V, total width: 2,830 mm, total length: 2,300 mm, overall weight: 2,500 kg, working width: 1,950 mm, operating pressure: 6 bar, Equipment: documentation/manual, Kolbus Autobox BX200 with Magazine Feeder Boxmaker for producing customized folding cartons Magazine feeder for automatic sheet infeed Fully automatic setup via touchscreen Processes corrugated board up to a maximum of 10 mm Slotting knife width: 7 mm Nedpfjyaa Rnox Aqwoda Remote service enabled DEMO machine – LIKE NEW!

Year of construction: 2018, condition: ready for operation (used), An automatic slitter-rewinder Jurmet is available. Total operating distance: approx. 8900km, max. working width: 1600mm, min. parent roll width: 300mm, max. parent roll diameter: 1000mm, parent roll core inside diameter: 76mm/152mm, finished roll core inside diameter: 25.4mm/76mm, max. mechanical speed: 500m/min, max. web tension: 153N, knife positioning accuracy: +/-0.3mm, pressure roller width: 1600mm, max. product weight: 150g/m², max. product thickness: 220µm, operating hours: approx. 9850h. Documentation available. An on-site inspection is possible. Njdozhnupjpfx Aqweda

Condition: good (used), Year of construction: 1997, punching force: 350 t, overall weight: 4,500 kg, input voltage: 380 V, input frequency: 50 Hz, Die cutting press TMZ Type L122, year 1997, format 93x126 cm, punching force 350 tons, speed 1400 cycles/hour, quick-clamping frame, safety foot mats, in good condition, immediately available. Ndodpfx Aqsx Dilhswja

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. Nodpfxow R Enmj Aqwjda More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: ready for operation (used), An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible. Ndjdpfxjvuadts Aqwea

Condition: ready for operation (used), A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible. Ndsdowut Haepfx Aqwoa

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, working width: 1,400 mm, FLEXO PRINTER SCHIAVI ARIES 6 COLORS Geared central drum flexo printer 6 colors Materials that can be printed plastic films and paper Ndedpfxeyrnmus Aqwsa Max. printing width 1400 mm Print repeat min/max 320/1080 mm Automatic turret rewinder Drying unit by gas Equipped with sleeves and aniloxes Year 1995

Condition: new, Bernardo Master 400 x 1000 universal lathe, including 3-axis digital display Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 prism insert (672.00 € net, not included in the price) Distance between centers: 1000 mm Swing over bed: 400 mm Ndedpfjgd Iagsx Aqwja Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mounting: DIN 55029, D1-5 Speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Tailstock diameter: 45 mm Tailstock travel: 100 mm Tailstock mounting: MK 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest - bore diameter max. 90 mm • Traveling steady rest - bore diameter max. 70 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Quadruple steel tool holder • Safety device for quadruple steel tool holder • Slip clutch • Micrometer longitudinal stop • Thread dial • LED machine lamp • Reduction sleeve • Change gears • 2 centers • Foot pedal with braking function according to CE • Motor with magnetic brake according to CE standard / operating tool Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 / Factory installation Price: 672.00 € net, not included in the price )