Used Machines with a clamping force of 1000 - 4999 kN for sale (459)

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 YEAR 2003 Cjliqgrjd Sqrrezjgt Grinding force 130 TO Scrow 40 mm Operating hours 77890 h tie bar spacing 42x42

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, Functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater Cgsliov D Nxlsqgrzst 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: excellent (used), Year of construction: 2005, Description Stork N-2500-1400 250 tons Year of manufacture:2005 Spraying unit: Cjliqjpxnuxjgrzogt Spraying pressure (max.) 2100 bar spraying volume (max.) 595 ccm Injection weight PS (max.) 565 g spraying speed (max.) 299 ccm/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons clamping force 275 tons size of clamping platen (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. Mold weight Mold height (min./max.) 200-685 Clearance between tie bars 585-585 mm Ejection stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control) Fail-safe device (light barrier) 2 air ejectors or air controlled valve gate nozzle Hydraulic nozzle and mold valves Switchover to holding pressure by pressure measurement in the spraying cycle. incl. Labotek granulate dryer. Eta Control to reduce power consumption. Machine is under power and can be inspected and tested by prior arrangement.

Condition: defective spare-parts repository (used), Year of construction: 2007, Functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us Celiqgrsrfbnmszogt On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, injection pressure: 2.2 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900 C2 warehouse no.: 503535 manufacturer: KRAUSS MAFFEI type: KM 420-1900 C2 controller: MC 4 year of construction: 2005 operation hours: 59000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 580 mm max. open daylight: 1300 mm opening stroke: 720 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg technical data injection unit screw diameter: 60 mm swept volume: 769 ccm injection pressure: 2200 bar screw length: 23 l/d screw speed: 285 min Cslsvitaqoiqgrzegt plasticising rate: 70 g/s PS injection rate into the open: 700 g/s PS number of heating zones: 6 measures & weight measures of machine l x w x h: 6.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 4x Machine without Handling machine without material hopper Anti vibration mounts mould heating 12x

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012030996, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Cjljv Sq Nueiqgrzjgt Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: excellent (used), Year of construction: 1999, Angel ES 1800/350 HLClosing 350 TO (up to 400TO)Year 1999Scrow 60 mm Coliqged Sym Eorzjgt

Condition: good (used), Year of construction: 2006, Krauss Maffei injection molding machine KM 350 - 2700 C2 Year of construction : 2006 Control : MC 4 Technical details Clamping unit : Closing force : 3500 kN Mold opening force, max: 220 kN Moving force of moving plate Opening: 105 kN Moving force of moving plate Closing: 95 kN Size of mold plates (h x v): 1060 mm x 1095 mm Distance between columns (h x v): 710 mm x 710 mm Cgolismki Iuoqgrzjt Mold opening stroke: 920 mm Mold height min: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejector force: 95 / 48 kN Injection unit Auger diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1829 bar Displacement volume: 1433 ccm Injection weight, PS: 1304 g Injection speed: 513 ccm/s Screw speed: 218 1/min Maximum plasticization rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor capacity: 75 kW Installed heating power: 36 kW Adjustable barrel heating zones: 7 Tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total weight of the machine: 15300 kg Maximum mold weight: 4780 kg

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, clamping force: 3,800 kN, screw diameter: 60 mm, clearance between the columns: 740 mm, displacement volume: 910 cm³, mold height (min.): 250 mm, ejector stroke: 200 mm, Servo driven machine. Hopper drier, hopper loader and 3 axis robot included in the price. Price can drop if the machine is purchased without them. Cgsliewf Urfjqgrzst Still in production and available for inspection. Price loaded on truck.

Condition: good (used), Year of construction: 2003, operating hours: 40,364 h, Functionality: fully functional, clamping force: 2,200 kN, screw diameter: 43 mm, clearance between the columns: 510 mm, column diameter: 115 mm, displacement volume: 351 cm³, injection pressure: 2,454 bar, mold height (min.): 210 mm, ejector force: 50 N, ejector stroke: 220 mm, opening stroke: 630 mm, plate width: 860 mm, plate height: 860 mm, overall weight: 14,000 kg, heating capacity: 13.1 kW (17.81 HP), pump power: 30,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, SANDRETTO NOVE S 220/860 injection press from 2003 Cgeliqjvy Tptogrzst

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 800 mm, displacement volume: 1,047 cm³, injection pressure: 1.778 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900/55 CZ warehouse no.: 503534 manufacturer: KRAUSS MAFFEI type: KM 420-1900 55 CZ controller: MC 4 year of construction: 2004 operation hours: 76000 h technical data clamping unit clamping force: 4200 kN Colisvirx Ejqgrzogt distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg technical data injection unit screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar screw length: 20 l/d screw speed: 527 min plasticising rate: 95 g/s PS injection rate into the open: 953 g/s PS number of heating zones: 6 technical data 2. injection unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³ Distance between sprayer 1 and 2: 300 mm (piggyback ) measures & weight measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012032351, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Cgeliqgrsv Sq H Hezot Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350BJ 2003Sleisskraft 130 TOScrow 40 mmOperating hours 77890 hHolmenabstand 42x42 Celiqgrod Tnbhozegt

Condition: good (used), Year of construction: 1995, operating hours: 30,919 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, column diameter: 85 mm, displacement volume: 318 cm³, injection pressure: 1,926 bar, mold height (min.): 155 mm, ejector force: 50 N, ejector stroke: 160 mm, opening stroke: 500 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,980 mm, total width: 1,500 mm, total height: 2,080 mm, overall weight: 7,000 kg, heating capacity: 12.8 kW (17.40 HP), pump power: 22,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, Injection press SANDRETTO OTTO 150/612 SEF 100 in good working order Celiqgrsvy Th Aezsgt

Condition: good (used), Year of construction: 2012, operating hours: 10,624 h, clamping force: 1,200 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 1.24 bar, ejector force: 16,000 N, ejector stroke: 100 mm, plate length: 400 mm, plate width: 710 mm, input frequency: 50 Hz, input current: 400 A, Equipment: documentation/manual, ENGEL insert 650H-120 injection molding machine Stock no.: 503503 Manufacturer: ENGEL Type: insert 650H-120 Control unit: CC200 Year of manufacture: 2012 Operating hours: 10624 h Technical data closing side Clamping force: 1200 kN Plate size h x v: 710 x 400 mm Installation height min.: 400 mm Plate distance max.: 750 mm Opening stroke: 350 mm Ejector stroke: 100 mm Ejector force: 16 kN Centering fixed plate D: 125 mm Technical data injection side Screw diameter: 50 mm Stroke volume: 392 ccm Injection pressure: 1240 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 230 min Plasticizing flow: 343 g/s PS Number of heating zones: 5 Nozzle path: 550 mm Equipment On-screen text German Cjlovbgw Heiqgrzjgt On-screen text English Air valve 1x Leveling elements Closing side vertical Interface for inking unit Mold heating 8x

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201807012051958, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 186 bar, injection weight: 194 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 450 mm, plate length: 615 mm, plate width: 615 mm, total length: 4,820 mm, total width: 1,320 mm, total height: 2,120 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 194 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 33 kW Machine dimensions (l x w x h) 4.82 x 1.32 x 2.12 m Machine weight 4.4 T Cgolov Sq D Eoiqgrzst

Condition: excellent (used), Year of construction: 2000, Demag 150/500-840 Closing 150 TO Csliqgrofp U Hnozsgt PVC clinder Scrow 50 mm Sprayweighted 400 g Tie bars wide 50x50 FY 2000

Condition: excellent (used), Year of construction: 2010, operating hours: 20,150 h, Functionality: fully functional, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 650 mm, column diameter: 130 mm, displacement volume: 658 cm³, injection pressure: 1,985 bar, mold height (min.): 200 mm, ejector force: 87,000 N, ejector stroke: 130 mm, opening stroke: 710 mm, plate width: 980 mm, plate height: 980 mm, total length: 7,540 mm, total width: 1,910 mm, total height: 2,310 mm, overall weight: 14,000 kg, heating capacity: 16.7 kW (22.71 HP), pump power: 37,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, Injection press SANDRETTO NOVE 1300HP/320 from 2010, production activity of PE containers for bodywork painting. Celiovy Tddsqgrzsgt Machine equipped with a masterbatch doser and three-phase power supply

Condition: good (used), Year of construction: 2003, operating hours: 48,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 4,470 mm, total width: 1,670 mm, total height: 2,180 mm, overall weight: 4,410 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x Cgsliqgrevbgtnezot

Condition: excellent (used), Year of construction: 2008, operating hours: 59,934 h, Functionality: fully functional, clamping force: 1,200 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 1.525 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,860 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, injection moulding machine ENGEL Victory 650-120 Tech Cgolju Iu H Hsiqgrzjt warehouse no.: 503240 manufacturer: ENGEL type: Victory 650-120 tech controller: EC200 A02 year of construction: 2008 operation hours: 59934 h technical data clamping unit clamping force: 1200 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 507 mm ejector stroke: 130 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 825 kg technical data injection unit screw diameter: 45 mm swept volume: 318 ccm injection pressure: 1525 bar screw length: 20 l/d screw stroke: 200 mm screw speed: 290 min injection rate into the open: 220 g/s PS number of heating zones: 5 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4.86m x 1.5m x 2.1m total weight: 7600KG equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 8x

Condition: good (used), Year of construction: 2003, operating hours: 53,000 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 2,180 mm, total width: 1,670 mm, total height: 2,180 mm, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503293 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 53000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm Cgjliqgouigkqsrzot min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

Condition: good (used), Year of construction: 2008, operating hours: 25,856 h, Functionality: fully functional, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, injection pressure: 2.022 bar, ejector force: 81,000 N, ejector stroke: 250 mm, plate length: 1,010 mm, plate width: 1,010 mm, total length: 7,200 mm, total width: 1,750 mm, total height: 2,420 mm, overall weight: 16,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,380 mm, Equipment: documentation/manual, injection moulding machine BATTENFELD TM 400-3400 warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 controller: UNILOG B6S Cjliqgsu Egfvsrzegt year of construction: 2008 operation hours: 25856 h technical data clamping unit clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm ejector stroke: 250 mm ejector force: 81 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar screw length: 22 l/d screw stroke: 375 mm screw speed: 178 min screw torque: 3759 N plasticising rate: 67 g/s PS injection rate into the open: 346 g/s PS nozzle stroke: 600 mm measures & weight measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG equipment included Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface EUROMAP 67 interface USB Schuko-socket 16A

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 630 S 2500-800 technical data clamping unit clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 90 mm ejector force: 225 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 200 mm screw speed: 60 min screw torque: 1000 N injection rate into the open: 300 g/s PS number of heating zones: 8 nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG equipment included screen text german CEE-socket 16A CompactFlash interface for data storage Cjliju Edwpoqgrzogt core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit

Condition: good (used), Year of construction: 2006, operating hours: 34,721 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 182 cm³, injection pressure: 2.12 bar, ejector force: 46,000 N, ejector stroke: 150 mm, installation height: 600 mm, total length: 5,580 mm, total width: 2,250 mm, total height: 2,880 mm, overall weight: 12,600 kg, type of input current: three-phase, input voltage: 400 V, rotary table diameter: 1,500 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 1500T 1600-350 vertical warehouse no.: 503413 manufacturer: ARBURG type: Allrounder 1500T 1600-350 controller: Selogica year of construction: 2006 operation hours: 34721 h technical data clamping unit clamping force: 1600 kN distance between tie-bars h x v: 1500 x mm min. mould height: 600 mm max. open daylight: 900 mm opening stroke: 300 mm round table diameter: 1500 mm ejector stroke: 150 mm ejector force: 46 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw speed: 53 min screw torque: 640 N nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 5.58m x 2.25m x 2.88m total weight: 12600KG equipment included screen text german CEE-socket 16A rotary table Cascade control hydraulically 4x Cgjlju Ecbajiqgrzjt core pulling hydraulically 2x machine with rotary index table machine incl. water flow regulator machine without material hopper Schuko-socket 10A mould heating 12x

Condition: good (used), Year of construction: 2004, operating hours: 69,000 h, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, ejector force: 83,000 N, ejector stroke: 250 mm, plate length: 980 mm, plate width: 1,050 mm, total length: 7,980 mm, total width: 2,220 mm, total height: 2,570 mm, overall weight: 30,750 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, injection moulding machine ENGEL ES 1800-350 HL CC100 warehouse no.: 503394 manufacturer: ENGEL type: ES 1800-350 HL controller: CC100 year of construction: 2004 operation hours: 69000 h technical data clamping unit clamping force: 3500 kN size of mould plates h x v: 1050 x 980 mm min. mould height: 350 mm max. open daylight: 1300 mm opening stroke: 950 mm ejector stroke: 250 mm ejector force: 83 kN weight of mould: 2500 kg technical data injection unit screw diameter: 70 mm swept volume: 1039 ccm injection pressure: 1441 bar screw length: 20 l/d screw stroke: 270 mm screw speed: 226 min injection rate into the open: 386 g/s PS number of heating zones: 5 nozzle stroke: 500 mm measures & weight measures of machine l x w x h: 7.98m x 2.22m x 2.57m total weight: 30750KG equipment included Cgeliqsuhz R Aogrzet screen text german machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system handling type: Handling manufacture: ENGEL controller: ER-HLI 81 year of construction: 2004