Used machining centers (vertical) X-axis travel 1700mm for sale (183)

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer. Godpfjzy U Rujx Aciskb

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Godpevrxd Hofx Acijkb Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm switched on hours: 78.328 h spindle hours: 38.073 h control: Heidenhain iTNC 530 tool changer with: 30 Plätze tool taper: HSK-A 63 feed speeds infinitely variable: 90 mm/min rapid traverse:: 90 m/min Gkedpjzp Dvrsfx Aciob table-size: 950 x 650 mm table load capacity: 1000 kg total power requirement: 73 kVA Weight approx.: 11,0 t dimension machine approx.LxWxH: 4,9 x 4,3 x 3,15 m The DECKEL MAHO DMC 75 V linear is a highly precise vertical CNC machining center equipped with linear drive technology, making it ideal for 3-axis machining. *

Condition: good (used), Year of construction: 2000, CNC Machining Center IBARMIA ZV 40, L 2200 Year of manufacture: 2000 ————— Technical data: X-axis: 2200 mm Z-axis: 600 mm Y-axis: 600 mm WORK TABLE Number of T-slots: 5 Size of T-slots: 18 mm Distance between T-slots: 125 mm Minimum/maximum distance spindle nose/table (optional): 200 (800/1000) mm WORKING SPINDLE Tool holder: SK 40 DIN 69871 Pull stud for tool holder SK: DIN 69872 Tool clamping force SK: 12,000 N Inner bearing diameter: 80 mm Max. standard speed: 8,000 min⁻¹ DRIVE POWER Main spindle motor at 100% (intermittent): 29 (38.5) kW Constant power at standard version from: 1,500 min⁻¹ FEED Power in X, Y, Z at 100% (intermittent): 13,000 (16,000) N Rapid traverse rate in X, Y, Z: 30 m/min Max. working feed rate in X, Y, Z: 10 m/min PERFORMANCE Milling performance in steel St 60: 650 cm³/min Drilling performance in steel St 60: Ø 60 mm Thread cutting performance in steel St 60: M36 TOOL MAGAZINE Number of tool positions (optional): 24 (40–52) Tool length max.: 300 mm Gsdezv Sk Rjpfx Aciekb Tool weight max.: 10 kg Tool diameter max. with full magazine: 85 mm Tool diameter max. with free adjacent positions: 125 mm Tool management: Random Tool change time: 3.5 s Tool change time "chip-to-chip": 7 s GENERAL Structural paint in 2 colors: RAL gray 7037 / blue 5012 Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump: 0.75 kW

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: BOSCH, controller model: OSA3, number of axes: 4, This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Machine Benefits Technical Machine Benefits Gksdpfx Acjzvybdeisb • Internal coolant supply

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 2,450 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 850 mm, table width: 950 mm, table length: 2,700 mm, overall weight: 23,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Gkedpjzvv A Rofx Acieb

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 Gedpjrw Dknjfx Acijkb tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Gedpsu Hf Ryjfx Acijkb

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 5,440 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, spindle speed (max.): 60,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 12, number of axes: 5, This 5-axis Hamuel Reichenbacher ECO-NT was manufactured in 2011. It features a working envelope of 4,845 mm and 5,440 mm in the X-axis, 1,630 mm in the Y-axis, and 1,000 mm in the Z-axis. The machine is equipped with a powerful spindle speed of up to 60,000 rpm and a versatile tool changer with 12 positions. If you are looking to get high-quality milling capabilities, consider the Hamuel Reichenbacher ECO-NT vertical machining centre we have for sale. Contact us for further details. • Unit Configuration: 5-axis milling units with cardan or fork-mounted spindle • Reckert Spindle Power: 4.6 kW - 15 kW • Reckert Spindle Speed: 0 - 60,000 rpm • Reckert Tool Holder: HSK F25 - F63 • Omlat Spindle Power: 3.5 kW - 7 kW • Omlat Spindle Speed: 0 - 45,000 rpm • Omlat Tool Holder: HSK F25 - F63 Gkodpfxozu Rnfs Acieb • Tool Changer: 12 position tool changer • Extraction & Chip Disposal: Room extraction nozzle for lubricant mist and dust, clamping device extraction • Machine Table Equipment: HPL table surface (smooth or grid), Aluminum table surface (smooth or grid), Steel strips with fitting and threaded bushes • Workpiece Clamping Technology: Vacuum clamps, Pneumatic clamps, Special clamping devices Additional Equipment: • Loading and unloading systems, Torque support for additional units, Air blow nozzles, Air ionisation, Minimal quantity lubrication, Tool breakage control, Tool recognition system, Camera system, Laser projector Supported Materials: • Wood, Aluminum, Steel, Inconel, Titanium, Plastic, Composite materials, GRP, Hybrid plastic/metal parts

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 8,060 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 760 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, total height: 3,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 20, tool weight: 6,000 g, product length (max.): 11,500 mm, number of axes: 5, This 5-axis Hamuel Reichenbacher Vision Flex was manufactured in 2021. It features an impressive X-axis travel of 8,060 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 760 mm. The machine is equipped with a spindle speed of up to 24,000 rpm and a 20-station automatic tool changer. If you are looking to get high-quality machining capabilities, consider the Hamuel Reichenbacher Vision Flex vertical machining centre we have for sale. Contact us for further details. Gsdpfxezu N Uqj Aciskb • Number of Axes: 5-Axis (C-axis ±360°, B-axis ±180°) • X-Axis Travel: 8,060 mm • Y-Axis Travel: 1,210 mm (+ 400 mm exchange stroke) • Z-Axis Travel: 760 mm • Axis Rapid Feed Rates: X = 80 m/min, Y = 60 m/min, Z = 40 m/min • Axis Acceleration: 6 m/s² • Spindle Speed: Up to 24,000 rpm • Main Spindle Power: 15 kW (S1 continuous), 18 kW (S6 max) • Spindle Torque: 14.3 Nm (S1), 17.2 Nm (S6) • Spindle Tool Holder: HSK-F63 • Max Tool Length / Weight: 240 mm / 6 kg • Tool Changer: 20-station disc changer (automatic) • with 19" TFT display and HT-2 handheld terminal • Supply Voltage: 400 V (3~ ±10%, 50 Hz) • Rated Current: 90 A • Input Fuse: 100 A (Ic < 17 kA) • Control Voltage: 24 V DC • Total Power: 45 kW • Compressed Air Supply: min. 7 bar, ca. 1,000 NL/min • Lubrication System: Central automatic lubrication system (3 L grease capacity) + Minimal Quantity Lubrication (MQL) with 3 L tank • Machine Weight: 10,000 kg • Machine Dimensions (Floor Space): approx. 11.5 m (X) x 3.0 m (Y) x 3.0 m (Z) Additional Equipment: • LEHMANN chip conveyor, EATON manual pendant station, pneumatically adjustable profile clamping blocks (8 beams), 2-channel control setup for concurrent setup/machining

Condition: used, Year of construction: 1996, x-travel 3000 mm y-travel 1500 mm z-travel 400 mm Serial number 7872 chip conveyor MAYFRAN 40.6GS-HR/SP20 Gsdpfxeud Ixls Acijkb control SIEMENS SINUMERIK 820 table surface area 3000 X 1500 mm table load 1000 kg / m2 Tool changer 52 stck. weight of the machine ca. 15000 kg UNISIGN - Uniport 4 - Machining centre - Vertical Technical details will be added shortly 40820 operating hours including chip conveyor from the manufacturer MAYFRAN with TYPE 40.6GS-HR/SP20 Total weight: 15,000 kg

Condition: used, Year of construction: 2010, HEDELIUS C 50-1800 – Vertical CNC Machining Center – Year of Manufacture 2010 – HEIDENHAIN iTNC530 For sale is a high-quality vertical CNC machining center, the HEDELIUS C 50-1800, manufactured in Germany. This machine is ideally suited for tool and mold making, general mechanical engineering, as well as precise single-part and series production. The HEDELIUS impresses with its robust design, proven HEIDENHAIN control system, and large travel range, combined with a compact footprint. Technical Data Manufacturer: HEDELIUS Type: C 50-1800 Year of Manufacture: 2010 CNC Control: HEIDENHAIN iTNC 530 Travel (X/Y/Z): 1,800 x 510 x 480 mm Table Size: 2,100 x 510 mm Spindle Taper: SK 40 Spindle Speed: up to 8,000 rpm Tool Magazine: 20-position Max. Tool Length: 250 mm Max. Tool Diameter: 63 mm Distance Spindle – Table: 570 mm Machine Weight: approx. 5,500 kg Equipment HEIDENHAIN iTNC530 CNC control 20-position tool changer Coolant system CE marking Condition The machine is in overall good and well-maintained condition. The documented spindle operating time is approximately 9,800 hours. An inspection under power is possible by appointment. Location: Germany _____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Gkedpfszk Etnox Acijb Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center – spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Travel in X: 2,500 mm Travel in Y: 620 mm Travel in Z: 500 mm Table surface area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system 4th axis: See photos (this was installed on this machine approximately 10 years ago and then stored. None of the current operators know how or if the device works.) Full enclosure Electronic handwheel Coolant system Work area lighting Chip tray The machine is in operation and can be inspected while powered on after prior arrangement. With an X-axis travel of 2,500 mm and a table surface area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in machine, tool, jig, and steel construction. Gedpfx Acjzc Rlhjijkb The comparatively low spindle running hours of only 9,546 hours are particularly noteworthy. The Hedelius C60 stands for robust German engineering quality, high precision, and a durable design. Inspection is possible at any time in Bremen by appointment. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2003, Technical details: x-travel: 3600 mm y-travel: 900 mm z-travel: 820 mm b-axis: -100 - +100 ° control: Siemens 840 D tool changer with: 30 Plätze rapid traverse:: 100 m/min rapid traverse:: 60 m/min. Gedezi Nc Repfx Aciokb table-size: 4200 x 900 mm table load capacity: 4200 kg total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 4,6 x 8,7 x 3,3 m The DECKEL MAHO DMF 360 Linear is a highly dynamic 5-axis travelling-column machining center designed for the complete machining of large and heavy workpieces. Thanks to the linear drive in the X-axis, the machine achieves very high rapid traverse speeds and reduced non-productive times, making it particularly suitable for toolmaking, mold making, and general mechanical engineering. Travelling-column design for high stability when machining long workpieces Linear drive in the X-axis with rapid traverse speeds up to 100 m/min 5-axis machining with NC swivelling milling head (B-axis) Large travels for machining components longer than 4 meters High precision through direct measuring systems and thermally symmetrical machine design *

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, CNC-controlled vertical machining center AXA VSC-3-3000-M Year of manufacture: 1995 Control system: Heidenhain TNC 407 Technical data: X-axis travel: 3000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table size: approx. 3000 x 500 mm Spindle connection: SK40 Speed range: up to 6000 rpm 22-tool automatic tool changer Coolant system Heavy-duty frame construction Special features: Additional angular/universal milling head 4-/5-axis machining possible Flexible machining of complex workpieces Ideal for toolmaking, mechanical engineering and single-part production The machine is in good condition. Gkedpfx Acsy U Hy Tsieb Inspection under power is possible by arrangement.

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 40, Hedelius BC 80 This machine was primarily used for pre-milling operations at our facility until January and is currently out of service due to a hard drive malfunction. It has a Heidenhain control system, and the 4th axis is prepared but has never been installed. The drives were functioning without any issues; however, the spindle makes noise at higher speeds. As we need the space for our assembly operations, we are offering the machine for sale. Gedpfx Aozx Ecxociokb Our asking price, ex works, is 6,000.00 Euros.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Gkjdpjzzl U Tsfx Aciob Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm Gkodpfxjy Skmre Aciob • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Brand new Spindle installed as end of April 2026

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Gkodpfxoguk S Ss Acijb Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 80,000 m/min, rapid traverse Z-axis: 48,000 m/min, table width: 835 mm, table length: 3,500 mm, table load: 3,500 kg, 1 Axis CNC Swivel head, infinitely variable Axis drive with ball screw drive Roller linear guides in all axes Direct path measuring systems Full work area encosure with roof Chip conveyor Coolant unit X - Travel: 3000mm Y - Travel: 825mm Z - Travel: 1100mm B - Axis: - 3 to + 105° Gkodpfx Ajwyv Nzocieb Table Length: 3500mm Table Width: 835mm Table load: 3500 Feed rate X-Axis: 48000mm/min. Feed rate Y-Axis: 80000mm/min. Feed rate Z-Axis: 48000mm/min. Spindle Taper: HSK 100ISO/Bt/Mk Power on spindle: 37kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:25 Number of controlled axis: 4 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3800mm Height: 3800mm

Condition: repair required (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, documentation/manual, - SK 40 tool holder - The machine is currently idle. - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. Godjywpa Iopfx Aciekb The machine can be inspected under power at any time.

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, Godpfxjzd Eqas Aciskb spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: MAZATROL, controller model: 640 M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VTC 300C II was manufactured in 2012. It features a spindle speed of 12,000 RPM and a tool capacity of 30 tools in the automatic tool changer. The machine has a generous travel of 1740 mm in the X-axis, 760 mm in the Y-axis, and 660 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 300C II vertical machining centre we have for sale. Contact us for further details. Gkjdpjztdzisfx Aciob • Tool setter • 30 tools in ATC Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Gksdpfx Acozb H Tfsijb Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: like new (used), Year of construction: 2007, Table size 2200 x 1000 mm Longitudinal travel 2050 mm Cross travel 1150 mm Vertical travel 760 mm Spindle speeds 12.000 rpm Spindle taper ISA 40 Power feed 1 - 8.000 mm/min Rapid speed Z-axe 15 m/min Gedpeg Tdavofx Acijkb Rapid speed X - Y axis 20 m/min Control Heidenhain IT 530 NC Tool change 40 pcs