Used machining centers (vertical) X-axis travel 1200-1699mm for sale (209)

Condition: used, Year of construction: 2003, x-travel 1660 mm y-travel 510 mm z-travel 510 mm control Mazatrol 640M Ledpoztfuwefx Afksaf

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, controller manufacturer: HEIDENHAIN, total height: 2,300 mm, total width: 3,250 mm, overall weight: 3,200 kg, spindle speed (max.): 8,000 rpm, product length (max.): 2,900 mm, number of axes: 3, This 3-axis Eikon MV2 was manufactured in 2003. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 300 mm, and Z-axis travel of 350 mm. The machine is equipped with an automatic tool changer with 20 positions and a maximum tool diameter of 80 mm. If you are looking to get high-quality machining capabilities, consider the Eikon MV2 vertical machining centre we have for sale. Contact us for further details. Ledpfx Afozrg Uvjkjaf • Number of tool slots: 20 (one is defect) • Max tool length: 200 mm • Height adjustment: 860 mm • Rapid Traverse: 50 m/min • Main electronic connection: 380 V / 50 Hz / 3-Phase • Power consumption: Approx. 12 kW • Air pressure: 6 bar • Chip conveyor: Length with chip conveyor: Approx. 3,200 mm • Internal cooling: Integrated air cooling system • Air supply: Average air consumption: 3 m³/h • Spindle nose: DIN 2079-40 • Optional spindle speeds: 12,000 rpm or 20,000 rpm • Electronic spindle orientation • Feed rate: 1 – 15,000 mm/min • Absolute rotary serial encoders • Programming resolution: 1 μm • Z-axis equipped with safety brake • Maximum tool diameter: 80 mm • Maximum tool weight: 3 kg • Tool-to-tool change time: 2 seconds • Minimum spindle-to-table distance: 145 mm • Coolant tank capacity: Approx. 200 litres • Coolant pump capacity: 50 l/min • Coolant wash gun • Length with chip conveyor: Approx. 3,200 mm

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SELCA, controller model: S3045, spindle speed (max.): 3,000 rpm, number of axes: 3, This 3-axis ZPS MCFV 125 EZ was manufactured in 1999. It features a Selca S3045 control system, a spindle speed of 3,000 rpm, and a tool changer with a capacity of 15 tools. The table size is 1,300 × 600 mm, and it includes a gearbox for gear changes. Consider the opportunity to buy this ZPS MCFV 125 EZ vertical machining centre. Contact us for more information. • Rotary axes: No Lsdpfx Afeyctt Iekoaf • Tool changer: 15 tools • Table size: 1,300 × 600 mm • Optical scales: Yes • Options: Gearbox (gear change) Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Complete with manuals and CE certificate. Lasdpfx Afezu At Tjkef

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg Lajdpfx Asndz Aqefkef spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *

Condition: new, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 8,500 kg, table length: 1,400 mm, table width: 600 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 17 W, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 1200 machining center in a cross table design stands for high precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for a wide range of demanding machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from the warehouse ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease purchase options available upon request ✔ 24 months warranty Technical equipment: Control system: ✔ HEIDENHAIN TNC 7 Basic ✔ HEIDENHAIN TFT screen 16" Ljdpfjvn Eqxex Afkeaf ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal hinged belt chip conveyor ✔ Preparation for the integration of a rotary table ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Huron KX20 vertical machining centre was manufactured in 2002. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. With a spindle speed of 18,000 RPM and a tool magazine with 30 positions, this machine is designed for high-speed performance in molds, dies, and aerospace components. If you are looking to get high-quality machining capabilities, consider the Huron KX20 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Purchasing: Special bundle conditions available when buying both units • Key highlights: Lodpfx Aezqczcsfksaf • High-speed performance for molds, dies, and aerospace components with excellent surface finish • Siemens control and HSK40 taper for seamless integration into modern production Technical Specification Taper Size HSK 40

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Din 40 spindle taper, 48 station tool changer, Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor, Lajdpfx Afozcy Irokjf

Condition: excellent (used), Year of construction: 2023, Rod loader SL 1200 Year of manufacture: 2023 Ljdpfx Ajzuxwbsfksaf

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in June 2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. Furthermore, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Manufacturing date: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color screen Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Lajdpfx Aszp Iz Esfkof Direct drive spindle Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Form A High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Alignment screws and shims CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connection power: 25 kVA Frequency: 50/60 Hz 3 phases Condition: The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Ledpfxezcppls Afkeaf Tool changer: 24 positions Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling Laodpfxjzn Uqqe Afksf • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off • Maximum height when the Z-axis is fully extended: 3107mm Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) • basic package of tool holders included • no bar feeder included (can be purchased optional, price upon request) • no chuck included • retrofits possible (price upon request) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Lodpfx Aszrv Dgofksaf Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-4SSHE was manufactured in 2007. It features a maximum spindle speed of 12,000 rpm and a generous X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a capacity for 24 tools and includes cooling through the spindle and a chip conveyor. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SSHE vertical machining centre we have for sale. Contact us for further details. • Cooling through spindle Lasdpfxoznv Iws Afkof Additional equipment • Chip conveyor Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • 4th axis: Yes, mounted • Tool magazine: 30 stations • Automation: Lang Eco Compact 10 (2011) (fully functional) Additional equipment, not included • Chip conveyor Lasdpeyxnmvjfx Afksf • Band filter • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Spindle power 24Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, Laodpfjzbkm Nex Afkef through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Lsdpfx Afjzqunuoksaf Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: used, Year of construction: 1996, Table size 1600 x 650 mm X/Y/Z - 1300/650/660 mm Spindle taper BT 50 Spindle speeds 6000 rpm No. of pockets in tool changer 30 pcs. Control: Enshu/Fanuc Equipped with: Rotary table as 4th. axis Lodpfx Afjzr Drfjkjaf 28 tool holders

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is a used SIGMA Zenit 5 vertical CNC machining center with a GE Fanuc Series 18-M CNC control. The machine features a large work area, an automatic tool changer, and an NC rotary table with a chuck mounted on the machine table. This makes it suitable for general milling, drilling, and machining tasks, as well as – if the rotary table is functional – for machining with an additional rotary axis. The machine is currently located at the operating site. An inspection and functional test can be arranged after prior agreement. TECHNICAL DATA Control: GE Fanuc Series 18-M Travel in X-axis: approx. 1,250 mm Travel in Y-axis: approx. 600 mm Travel in Z-axis: approx. 685 mm Table size: approx. 1,400 × 650 mm Maximum table load: approx. 1,400 kg Spindle speed: presumably up to 12,000 rpm Spindle power: presumably up to 25 kW Lsdezucrcopfx Afkjaf Tool holder: presumably ISO 40 / SK 40 Tool changer: automatic Tool positions: number to be checked Connection: 400 V / 50 Hz / 3-phase Rated current: 55 A Machine weight: approx. 8,000–8,500 kg Dimensions: approx. 4,120 × 3,270 × 3,050 mm EQUIPMENT – GE Fanuc Series 18-M CNC control – Automatic tool changer – NC rotary table with chuck – Spindle cooling unit – Coolant system – Hydraulic unit – Fully enclosed work area – Machine lighting – Control panel with screen and keyboard – Existing documentation and tool holders: scope on request or to be checked CONDITION Used machine with signs of wear and tear consistent with age and use. The work area contains typical soiling from chips and coolant. TERMS OF SALE Sale from the current location. Disassembly, loading, and transport will be carried out by agreement and will generally be at the buyer's expense.

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Ljdpfxen Hqa To Afkoaf Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 3D Measuring taper Misc.accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2004, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Lsdpoxk U R Nofx Afksaf Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: like new (used), Year of construction: 2022, operating hours: 3,000 h, FOR SALE Ledpfxeyzb S Do Afkeaf HAAS EC-1600 Horizontal Machining Center Exceptional condition – Year 2022 – Available immediately This state-of-the-art machine is ideal for machining heavy and large parts. Commissioned in October 2022, it has been used very little and has been rigorously maintained according to the manufacturer's standards. Technical specifications: - Model: EC-1600 (Generation 10/2022) - Axis travels: X: 1,626 mm | Y: 1,270 mm | Z: 1,016 mm - Table dimensions: 1,626 mm x 914 mm - Maximum load capacity: 4,536 kg - Spindle: ISO 50 - Usage: 3,000 hours - Power supply: 440 V / 3 Phase / 50-60 Hz (35 Amps) 1,300 hours €70,000 The equipment is ready for shipment. I am at your complete disposal for any further information or to coordinate transport logistics. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders Lsdpfjuhb D Aex Afkoaf

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 Lsdoy Tzc Hspfx Afkeaf - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Laedpfxszkbr Ts Afkef Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.