Used machining center

HURCO VMX60i

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, Dodpjzh I Ebjfx Aa Hokt input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Dedpfx Aezk H Hvea Hskt Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel Dkedpjlz Rvlsfx Aa Hjt 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 Djdsyiz R Uspfx Aa Hokt • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor. Dkjdpfx Aajzh I Ago Hst

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Dksdpsyu Nqmsfx Aa Hst Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: excellent (used), Year of construction: 2001, Technical specifications: Djdpfx Ajzl S Uzja Hekt 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm Dodpfxjydqpio Aa Hekt main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Dksdehakfaspfx Aa Hst Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, feed length X-axis: 762 mm, feed length Y-axis: 508 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, 5-axis machining is an effective method for reducing setups and increasing accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centers offer cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS features an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter, which includes standard T-slots and a precision pilot bore for versatile fixturing. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation, offering excellent tool clearance and a large part capacity. 5-axis simultaneous machining Powerful inline direct-drive spindle High-speed trunnion table Dkedpfxozr U N Uj Aa Hot Includes a Wireless Intuitive Probing System