Used machining centers (vertical) X-axis travel 1000-1199mm for sale (377)

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. weight of the machine ca. 7,4 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation - Internal coolant supply Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Isdpfx Aasytybyslehw Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2026, 1100 mm 650 mm 610 mm 1200x6000 mm BBT 40 12.000 U/min Ihodpfjx Urtxox Aalsw Motor Capacity 7,5/11 kW max. table load 1300 kg

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Iodpfx Aeym Sdysalehw Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, Technical details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: Heidenhain TNC 620 switched on hours: 20246 h spindle hours: 7724 h number of spindle speeds: 12.000 U/min. max. torque on the spindle: 75 - 95 Nm spindle taper MT: SK40 tool changer with: 24 Plätze table-size: 900 x 410 mm max. table load: 350 kg feed range: k.A. rapid traverse:: 36 m/min interface: RS232 control voltage: 24 DC V air-pressure connection: 6 / 8 bar total power requirement: 20 kVA Weight approx.: ca. 6,0 t dimension coolant device: 1,7 x 0,7 x 1,35 m dimension machine xH: 1,9 x 2,3 x 2,45 m TNC620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), can be integrated into the network Safety doors with impact-resistant plastic window panes Chip conveyor Hydraulic unit Coolant preparation system Rittal cooling system on the control cabinet Iedpfxevhbpdj Aalshw Work area Interior lighting *

Condition: used, Year of construction: 2008, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück Ihsdpfjwvl Aisx Aalew weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, 1HRT 210 A with tailstock - Oil dust collector

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h Ihjdpfx Aoylkl Toalew • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,150 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 660 mm, controller manufacturer: FANUC, controller model: 0i-MF, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3s Akira Seiki V 4.5 XP was manufactured in 2018. It features a Fanuc 0i-MF control type and offers a spindle speed of 12,000 rpm. With an X-axis travel of 1,150 mm, Y-axis travel of 640 mm, and Z-axis travel of 660 mm, this vertical machining center is in excellent condition. Consider the opportunity to buy this Akira Seiki V 4.5 XP vertical machining center. Contact us for further details. • Distance table–spindle nose: 100–760 mm • Rapid feed (X/Y/Z): 30 / 30 / 25 m/min • Table size: 1,300 x 600 mm • Tool changer: ATC, 28 positions Additional equipment • Chip evacuator Isdpfjyh Nwwex Aalshw Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, total height: 2,692 mm, table load: 700 kg, overall weight: 5,500 kg, number of axes: 3, This 3-axis Mazak VTC-20B was manufactured in 1996. It features a Mazatrol M-Plus or M-32B controller, with axis travels of X=1120 mm, Y=510 mm, and Z=510 mm. The table supports up to 800 kg, and the spindle operates at speeds up to 10,000 rpm. Note: the handwheel requires repair. Contact us for more information about this machine. Machine Benefits Iedpfx Aeyalicealjhw Technical Machine Benefits • Size: 1460 × 510 mm • Tool magazine: 24 pocket Extra Information The handwheel is not fully operative and needs a repair. Dimensions Machine Depth 2997 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h Ihsdpfox D I Stjx Aalow • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. • Tool magazine: 30 positions • Control: Fusion • Table size: approx. 1300 × 550 mm Ihsdpfxex Enlrj Aalew • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Wele AA1165 was manufactured in 2014. A vertical CNC machining center featuring a Fanuc 0i-MC control, it offers X/Y/Z travels of 1,100 mm, 650 mm, and 600 mm respectively. Rapid feeds reach up to 24 m/min, with a spindle speed of 15,000 rpm. The table supports loads up to 1,100 Kg. Consider the opportunity to buy this Wele AA1165 vertical machining center. Contact us for more information about this machine. • Status: Excellent • Rapid feed (X/Y/Z): 24 / 24 / 20 m/min • Distance table–spindle nose: 125–725 mm • Table size: 1,300 x 650 mm • Tool turret: 24 positions • Notes: Spindle recently replaced Ihsdeygmd Uepfx Aalew Additional equipment • Chip evacuator (chip conveyor) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,346 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information. • Table Length: 1200 mm • Table Width: 650 mm Ihodpfox Uq Hdox Aalsw • Maximum Spindle Speed: 20000 rpm • Spindle: EPM spindle made in Germany • Spindle Taper: ISO 40 dual contact • Tool Magazine Capacity: 30 positions • X, Y, Z Axis Scales • Linear Guideways (LM guide) • MPG Handwheel • Operation and Maintenance Manuals Included

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,145 mm, travel distance Y-axis: 615 mm, travel distance Z-axis: 615 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Pinnacle LV116 vertical machining center was manufactured in 2008. It offers robust and precise machining capabilities, ideal for a variety of applications. If you are looking to get high-quality milling capabilities, consider the Pinnacle LV116 machine we have for sale. Contact us for more information. OPTIONAL: Vices and toolsAdditional equipment Ihedpjx D Rpujfx Aalsw • Equipment: Automatic tool changer, coolant system with internal cooling

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 16,000 kg, number of axes: 3, This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Tool changer: 10 positions • High pressure cooling 40bar Ihodpfxsx D I I Uj Aaljw • Heidenhain ts460 workpiece probe + se660 receiver. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 550 mm, controller manufacturer: FANUC, controller model: 0i-MD, table width: 1,200 mm, table length: 600 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 4, This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. A large set of accessories and equipment is included. Contact us for more information. • Table size: 1200 × 600 mm • Spindle taper: ISO 40 • Through-spindle coolant system • Tool magazine capacity: 24 tools • Most common control: FANUC 0i-MD Additional equipment Isdsx D Hdbopfx Aalshw • Fourth rotary axis included • Tool and workpiece measuring probe • Extra coolant feeder • Air gun hose for compressed air cleaning • A set of accessories and equipment is included Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply Iedex T Dgnopfx Aalehw • Chip conveyor Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion CNC 640 M, workpiece height (max.): 640 mm, table width: 655 mm, table length: 2,820 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, This 3-axis Mazak VTC-200B was manufactured in 1999. It features a Mazatrol PC-Fusion CNC 640 M control system, with X, Y, Z travels of 1120 mm, 510 mm, and 510 mm respectively. The machine includes a swarf conveyor, cooling through the spindle, and probes for tools and workpieces. Consider the opportunity to buy this Mazak VTC-200B vertical machining centre. Contact us for more information about this machine. • Workpiece probe • Table dimensions: 2820 x 655 mm • Table capacity: 800 kg Isdsx Utwljpfx Aalohw • Tool probe • Cooling through the spindle • Swarf conveyor Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 1,652 kg, overall weight: 4,990 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 16,000 W, tool weight: 6,800 g, number of axes: 3, This 3-axis FADAL 4020 FX vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 1,219 x 508 mm and a maximum table load of 1,652 kg. If you are looking to get high-quality machining capabilities, consider the FADAL 4020 FX machine we have for sale. Contact us for further details. • Table • Size: 48" x 20" (1,219 x 508 mm) • T-slots: 5 x 18 mm x 95 mm Isdpoyn Eh Ijfx Aaljhw • Feed rates • Cutting feed (X/Y/Z): 800 ipm (20.32 m/min) • Rapid traverse: 1,000 ipm (25.4 m/min) • Accuracy • Positioning accuracy: ±0.0002" (±0.0050 mm) • Repeatability: ±0.0001" (±0.0025 mm) • Spindle • Orientation: Electromechanical • Drive: AC vector drive • Power • Spindle motor: 17.75 HP (22.1 HP peak) • Torque: 39 ft-lbs (78 ft-lbs peak) • Optional high torque: 15 HP / 227 ft-lbs • Tool changer (ATC) • Capacity: 21 tools (30 optional) • Selection: Random, bi-directional • Max tool diameter: 76 mm (114 mm without adjacent tools) • Max tool length: 381 mm • Machine data • Power requirement: 76 A, 230 V, 3-phase • Air requirement: 120 psi, 15 scfm Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis DEED V1160L vertical machining centre was manufactured in 2022. It features an X-axis travel of 1100 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DEED V1160L machine we have for sale. Contact us for further details. • Table size: 1200 x 600 mm • ATC (tool magazine): 24 positions (arm type) • Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min Technical Specification Taper Size BT 40 Ihsdpfx Aeymagpoalow

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine is equipped with a Heidenhain iTNC 530 control system and a tool changer that holds 30 tools. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 560 mm • Linear measuring system: Heidenhain X/Y/Z • Through-spindle coolant and air • Internal coolant supply: 20 bar • Coolant pump controlled via M-functions Ijdpfx Aasyrq Hkslohw • Connectivity: network and USB • Enclosure: polycarbonate safety enclosure; side windows left and right with hinges • Status signal light • Hours: 610 h Additional equipment • Chip conveyor, hinged-belt type (external) • Chip flushing system (M-function controlled) • Coolant belt filter system • Oil/coolant separator, electromechanical • Electrical cabinet cooler, air-to-air • Mobile electronic handwheel • Air pistol • Water pistol Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 23 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: Oi, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SMTCL vmc 1100B was manufactured in 2015, featuring a robust 1100mm X-axis, 610mm Y-axis, and 650mm Z-axis. It boasts a spindle speed of 10,000 rpm and a 24-tool magazine. Equipped with a Fanuc 0i control and a table surface of 1300 x 610, consider the opportunity to buy this SMTCL vmc 1100B vertical machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Table surface: 1300 x 610 mm • Number of tools in magazine: 24 Iedpeyaa Tcsfx Aaljhw • Tools come with the machine Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, total height: 2,700 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,985 mm, number of axes: 4, This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details. • Operating hours: 4,500 • Table size: 1200 × 540 mm • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Tool changer: random arm, 30 stations • Coolant: through‑spindle coolant 20 bar, flood coolant • Preparation: 4th‑axis preparation • Control: FANUC Oi‑M Easy Guide; look‑ahead 200 blocks; electronic handwheel; USB port • Other: automatic door opening/closing; 3‑color status lamp; documentation and CD‑ROM • Condition: Good; perfect working condition Iodpfxeyg Ilts Aalehw • Availability: Immediately available Additional equipment • 4th axis: NIKKEN CNC202FA • Chip conveyor • Belt‑type oil skimmer • Air/coolant guns Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,900 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, table load: 800 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information. • Coolant: internal cooling; through-spindle coolant (TSC) • Automatic tool changer: Yes • Hours: working hours approx. 2,900 h; cutting time 2,917 h; power-on time approx. 7,000 h Ihsdpfx Aaox D Nb Noljw • Status: machine under power; available for testing Additional equipment • Chip conveyor • Workholding on table: precision vise and chuck (as shown)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: SIEMENS, controller model: 840-D, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, spindle speed (max.): 10,000 rpm, This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center. Additional equipment • 2-fold pallet changer • 1 spindle cooling • Linear guide • 30-fold tool changer incl. tool holders • Coolant preparation with cooling incl. filter unit • Screw chip conveyor • Fully protected cabin with safety doors, electrically fused • Ball screw in all axes Machine Benefits Technical Machine Benefits • Machine only ran in 1-shift operation, maximum 3 days a week Iodpfx Aaeyftgyolshw Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, operating hours: 70 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC350, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain TNC 530 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information. • Prepared for 4th axis (interface prepared; compatible with Lehmann rotary table) • Table approx. 1,300 × 600 mm • CNC control: direct linear scales X/Y/Z; electronic handwheel; tool breakage monitoring • Spindle cooling; air blast through spindle • Tool system: ATC 40 positions; tool magazine with loading hatch; tool length measurement; tool clamping monitoring • Enclosure & safety: full machine enclosure; polycarbonate safety windows; automatic lubrication system; safety cabinet with air conditioning • Connectivity: USB interface; network connection • News spindle in 2020. New spindle has only 80 hours Additional equipment Ihedeycuc Dopfx Aaljw • Chip conveyor • High-pressure coolant system, 20 bar with belt filter unit • Coolant flushing system • Hydraulic unit • Workpiece measuring system (25.0 HDR) • Pallet handling interface (optional) Technical Specification Taper Size ISO 40