Vertical machining center

QUASER MV154 EL/12

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Hnedpoxf Ikfsfx Abkju

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Hodpfjzgcp Ssx Abksnu Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: good (used), Year of construction: 2018, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Hnedpfx Abjwtg Inekju Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters Hnedsvppw Sspfx Abkou EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories Hedpfx Aozbrrtjbkonu MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Hodpfex Hn D Rex Abkjnu Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Hjdpfx Abothuzpekonu Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Hnodexrnr Nepfx Abkeu Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Hjdpfxov Sdc Uj Abkonu

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Hnsdpfxjh Tnpxe Abkju