Milling machines

Hurco VMX 42i

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Rodjy Tw R Hopfx Adzocf Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2017, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 450 mm table size X: 750 mm table size Y: 600 mm max. workpiece size X: 1040 mm max. workpiece size Y: 730 mm max. workpiece size Z: 410 mm max. electrode weight: 50 kg max. workpiece weight: 1600 kg generator: 64 Ampere cooler drop tank control Charmilles Charmilles control system High precision mold and tool machining Integrated EDM generator Dielectric system with cooling Rodpfxsym Rr Nj Adzjcf Suitable for tool and mold making

Condition: like new (used), Year of construction: 2018, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: HURCO MAX5, overall weight: 6,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 3,900 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The machine is in like-new condition and ready for immediate use. Rcedjzuxidepfx Adzof A video can be sent upon request.

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Internal coolant system Chip conveyor Rjdjzmy T Uopfx Adzocf Detachable handwheel

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Rjdpfxoxrcnlo Adzocf

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Rcodpfx Adozguh Hszof Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2006, Hurco VMX 42 i, Year of manufacture: 2006, Control system: Ultimax 4, Travel range X/Y/Z: 1060/610/610 mm, Tool changer: 40 positions, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Chip conveyor, Rsdpjzg E Nuofx Adzecf Internal coolant system (IKZ), X and Y axes have slight play.

Condition: good (used), Year of construction: 2008, Universal machining center Machine type: DMG DMU 60 monoblock Control: Heidenhain iTNC 530 Year: 2008 Available after: sofort / now SPECIFICATIONS Travel X-Axis: 730 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis: 0,001° Rcodpoziy Iqofx Adzof Amount of controlled axes: 5 Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table: Ø 600 Table size: 1.000 x 600 mm Max. Table Load: 500 kg Equipment Chip conveyor Internal cooling: bar paper band filter Caliper: Heidenhain TS 649 Roto Clear Tool measurement Chip rinsing pistol Oil mist separator Working mode: 4

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,067 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Number of axes: 3 Spindle speed: 12,000 rpm Drive power: 12 kW Torque: 237 Nm Table size, X-axis: 1,270 mm Table size, Y-axis: 610 mm Rodpfjzapr Uox Adzjcf MACHINE DETAILS Number of tools in the magazine: 30 Tool holder: SK40 Operating hours: 12,000 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Rcodezaprzjpfx Adzsf Spindle cooler

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, MCOSMOS with GEOPAK module (CAD-assisted evaluation). Software - MCOSMOS 3 CNC V4 Equipment: PH10MQ probe head (incl. FCR25 quick-change rack). SP25M scanning probe system with 5-piece probe module set. MCOSMOS 3 CNC V4 incl. dongle (Wibu-Box). CAT1000PS V4 (CAD comparison and evaluation). Software upgrade MCOSMOS-1 from V2 to V4. Rsdpfx Adsx H Nn Rozjcf GEO-EDM add-on module for eroded parts. Part-program generator and GEO-EDM assistant.

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Redpfjzam E Eex Adzjcf Removable handwheel

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h Redpjy Tw Ryjfx Adzecf • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as provided) • Through‑spindle coolant (TSC) 21 bar • Air through spindle • High‑Speed Machining • Programmable coolant nozzle (P‑Cool) • DWO/TCPC • Auto Door • Side window • Top roof/enclosed top Additional equipment Rodjx Imttspfx Adzscf • Chip conveyor • Renishaw probes (probing system) • Robot interface

Condition: used, Year of construction: 2013, operating hours: 12,000 h, Hurco VMX42i WinMax control Table clamping surface 1270 x 610 mm Rcedpfx Asri N A Hodzsf Table load 1750 kg Travel X axis 1067 mm y-axis 610 mm z axis 610 mm Tool holder SK 40 Spindle speed max rpm 12000 Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter