Used machining centers (horizontal) X-axis travel 800-999mm for sale (56)

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Gkodpewq Iwxofx Aayef Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Gsdpex Hn D Refx Aayekf Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 4 Gsdpfxsx D Hq Ie Aayekf Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece X 900 mm Workpiece Y 1000 mm Workpiece weight 1000 kg Table Outer length 500 mm Outer width 500 mm Media Internal cooling Yes This 4-axis Mazak HI Nexus 6000 II horizontal machining center was manufactured in 2008. It features a robust NC rotary table, a Cromar chip conveyor, and cooling through the spindle. The machine offers a pallet size of 500 x 500 mm and can handle a maximum workpiece weight of 1000 kg. With 80 tool places and a rapid traverse rate of 60 m/min, this machine we have for sale is ideal for efficient machining. Contact us for further details regarding this horizontal machining center. Application Types Milling

Condition: used, Technical details: x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm speeds:: 6000 U/min table:: 500 x 630 mm with tool changer: 40 Plätze spindle taper:: SK 50 Gsdpjx A Szisfx Aayokf total power requirement: 25 kW weight of the machine ca.: 11500 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Gkodpevta Sbsfx Aayof Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: good (used), Year of construction: 2014, operating hours: 25,208 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, torque: 300 Nm, controller manufacturer: Siemens, controller model: 840D SL, rotational speed (max.): 12,500 rpm, spindle speed (max.): 12,500 rpm, spindle motor power: 40,000 W, number of spindles: 1, Operating hours: 23145 Year of construction: 2014 Control unit: Siemens 840 D SL Gkjdpfex Ecpisx Aayjf Spindle: EEC 100 Einheit 12500 1/min, 40 kW, 300 Nm Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 800 / 800 / 800 Pallet size (mm): 500 X 630 Workpiece clamping: 60 bar Additonal options, Specifics: Control of 4th line in the work area for hydraulic switching function; Interface for exhaust system; Screen blow-off device for operator door; Fast drill fracture sensing (SBBK); Integrated process monitoring and collision monitoring; standard operator-panel for tool-magazin;

Condition: excellent (used), FANUC Professional 6 Control Working travels 900 x 900 x 1020 mm Tool changer with 136 Positions Spindle speeds -10'000 rpm Spindle taper HSK100 Gkedpfx Aox A E Ensayof 2 paletts 630 x 630 mm B-axis 0.001° Palett changer FASTEMS FPC1500 Cooling through spindle 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Gkodox Hn Ddepfx Aayof Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 5584 mm Machine weight 16000 kg Measurements height 3342 mm Measurements depth 3693 mm Control Unit Brand FANUC Main Drive Number of axis 4 Tool taper BT 50 Spindle Speed 10000 RPM Movement X-Axis Movement 900 mm Gkodpfox D Iuhjx Aaysf Z-Axis Movement 1020 mm Y-Axis Movement 800 mm Tools Number of index 40 or 60 Max tool diameter 115 mm Max tool length 600 mm Max weight 30 kg This 4-axis Makino a81 horizontal machining center was manufactured in 2011. It features a robust 630×630 mm pallet, capable of handling a maximum load of 1200 kg, and a spindle speed range of 20−10000 min−1. The machine offers a rapid traverse rate of 50000 mm/min, enhancing productivity. Ideal for complex machining tasks, consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 1998, Fanuc System 16 MC control Godpfjwwkh Tsx Aayskf Travel paths X/Y/Z 800/750/770 mm Spindle speed 20,000 rpm Tool magazine for 132 tools HSK A-63 Dual pallet changer 630x630 mm Knoll system with internal coolant supply Chip conveyor

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm Gkodpowdywdofx Aayjf y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2930815010072, travel distance X-axis: 450 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 665 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 12,000 rpm, operating hours of spindle: 349 h, coolant supply: 40 bar, number of slots in tool magazine: 117, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Automation PSS-T300 - 117 tools in the magazine - IKZ 40 bar Basic machine G150 Travel path of the X-axis 450 mm Travel path of the Y'-axis 670 mm Travel path of the Z-axis 665 mm Power supply system 400 V, 50 Hz, TN-S Compressed air system, with pressure booster, operating pressure 5 and 9 bar, pressure vessel volume 10 l Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³, filter class ISO ePM1 80% Machine cooling system GCU (24 kW) with air-cooled cooling unit Modified door at machine column in case of integration of an automation system Machine control system HEIDENHAIN TNC7 with GROB⁴Pilot generation 2 Swivel axis calibration GSC Advanced Interface for connection of an automation system - standard interface version 1.7 (GROB) Control panel to enter tool data at tool loading and unloading position (HEIDENHAIN) Gsdpjx Ex Rxefx Aayekf Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Rotary table with EROWA MTS pallet clamping system (B-axis) Motorized spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools, BLUM-NOVOTEST Pallet storage tower system PSS-T300, basic module Host computer software PROCAM EMS light 10 xEROWA pallet, MTS 320 x 320 x 48 mm / STM 160, T-Slot 3 x Pallet ITS ø148 G (EROWA) 3 x EROWA pallet ø 148 P for part clamp EROWA adapter pallet MTS - ITS (STM160) High-pressure cutting fluid system (10-40 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flushing unit for the base of the work area Flushing unit (Z-axis) Part clamping system in work area, customer-specific - Compressed air, manual pressure regulation, 0.5-5 bar (P8.1) - Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Machine status light, 3-colored Machine accuracy package 1 Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: used, Standard Machine Specifications Table: Working surface: 305 x 305 mm Max. workpiece capacity: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Axis: 0.001° – 360° Distance from table top edge to spindle center: 40 - 550 mm Distance from table center to spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Speed: 20 – 20,000 rpm Drive: 4-stage gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of the 4th axis: 0.6 seconds Cutting feed rate X-, Y-, Z-axes: 40,000 mm/min Tools: Tool positions: 40 Tool selection method: direct control, bidirectional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Cooling system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 KVA, 200 V AC, 3 phases Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control system: Fanuc 16iMB Standard machine accessories Spindle with 20,000 rpm and 4-speed gearbox (2-speed gear drive, 2-speed electronic gearbox) 2 spindle bearing compensation within 0.005 mm (IAC system 1) Big Plus spindle (contact in the taper and on the Front face) Gkedpfx Aev Si Suoayef Automatic spindle cleaning with compressed air Coolant through spindle at 15 bar and its own pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of the X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool location: each tool is coded independently of the machine and identified in the magazine Original Kitamura tool hold function through T-code pre-selection Automatic pallet changer, 180° reciprocating (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip conveyor belts for coarse and small chips, with filter system Chip flushing at the bottom with a separate 1,200 W pump Fully enclosed Enclosure Automatic central lubrication of the guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light End of cycle lamp Compensating thread cutting 4 free M functions, M20 – M23 Pivoting control panel Portable handwheel RS 232C interface PCMCIA interface Door lock Emergency stop switch on the tool magazine Manual indexing switches on the tool magazine Self-diagnosis function

Condition: used, Year of construction: 2008, operating hours: 61,112 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 250 with RSP Operating hours: 61112 Year of construction: 2008 Control unit: Siemens 840D PL Spindle: 6.000 rpm Tool clamping system: HSK 100 Tool magazine / places: Rack / 234 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 800 / 800 / 800 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; alternative strategy; Integrated process monitoring (IPM) and collision monitoring; 3 colour status lamp; RSP 4-fach; tool cleaning; MCIS TDI tool planning; Feed force display; MCIS DNC; spline-interpolation; cycle 800; Gsdpfxoxwpi Ts Aayjkf

Condition: ready for operation (used), Year of construction: 2009, operating hours: 21,927 h, Control Unit Brand FANUC Model Series 21i-MB General Data Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Main Drive Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Table Outer length 500 mm Outer width 500 mm Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling Gsdpfxox D Sl Dj Aayjkf

Year of construction: 1997, condition: good (used), Control uni-Pro CNC 90 Gkedjlkgfaspfx Aayef Travel X/Y/Z 800/800/710 mm Spindle speed 4500 rpm Tool magazine for 52+120 tools SK 50 Indexing table 1° 4-fold pallet changer 500x630 mm chip conveyor

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the Gsdpextfz Djfx Aayokf scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2910555210188, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 30,000 rpm, coolant supply: 80 bar, number of slots in tool magazine: 326, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle with 30,000 rpm | HSK-63 - TM200 with 200 tool pockets - IKZ 80bar Basic machine G550 AB generation 2 Travel path of the X-axis 800 mm Travel path of the Y'-axis 1020 mm Travel path of the Z-axis 970 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control HEIDENHAIN TNC 640 with machine control panel GROB4Pilot Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system - standard interface version 1.7 (GROB) Time-controlled start of warm-up program - programmable at the HMI Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Pallet guide element at rotary table Motorized spindle HSK-A 63 30,000 rpm, 48/63 Nm, 40/53 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 126 pockets in total Additional tool magazine TM200 HSK-A 63 with 200 tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Gedpsx Evyksfx Aayjkf Scraper-type conveyor for larger quantities for aluminum chips, discharge height 1,600 mm High-pressure cutting fluid system (10-80 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Volume cutting package with detection element and flushing function Flushing unit (Z-axis) Machine accuracy package 1 Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Gsdpfx Aaew Al Tboyekf Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool position: each tool is independently coded by the machine and identified in the magazine Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Self-diagnostic function

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, Gsdpfx Aaowix Hhjyskf *

Condition: new, Year of construction: 2023, functionality: fully functional, with 8 pallets Fanuc M-Pro1 (0i-MF Plus) control system Travel X/Y/Z: 800/800/860 mm Rapid traverse X/Y/Z: 74/74/74 m/min Pallet size 500 x 500 mm Load capacity: 550 kg per pallet Workpiece size: Ø800 x H1,000 mm Tool holder: BBT 40 Gksdpfxeuafl Ie Aayjf Number of magazine positions: 220 Max. Tool diameter: Ø95 mm Max. Tool diameter with free neighboring pockets: Ø185 mm Max. Wkz. length: 400 mm Max. Tool weight: 8 kg Spindle cone: BBT40 Big Plus™ Speed: 15,000 rpm Chip spirals on the right and left in the machine Coolant through the spindle Dual chip conveyor Fully-fledged 4th axis from PARKSON 50 kvA transformer

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 61612677, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik, overall weight: 10,000 kg, No reserve price – sale guaranteed to the highest bidder! Gedpsxm Ucdefx Aayekf The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel range X-axis: 850 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Control unit: Siemens Sinumerik MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,500 mm Total weight: 10,000 kg EQUIPMENT NC rotary table Documentation Note: The clamping tower on the pallet table is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. X-axis travel: 900 mm Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes Control: Fanuc FS31i Spindle speed: 20-20,000 rpm Gkjdpfox Dazyox Aayjf Table: - External length: 1,000 mm - External width: 500 mm - Maximum table load: 1,000 kg New electric spindle installed 4 years ago. Tool magazine for 30 tools, incl. tool holders. The machine operated in single-shift operation. Inspection under power possible by prior arrangement.

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, Gksdswix E Rspfx Aayef 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm Gkjdpopumdcefx Aayof total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *