CNC - Machining Center - Horizontal
HELLER MC 2000

Name: HELLER MC 2000
Brand: HELLER
Availability: InStock

Year of construction

2011

Condition

Used

Location

Halberstadt Germany

CNC - Machining Center - Horizontal HELLER MC 2000

Machine data

Machine type:: CNC - Machining Center - Horizontal

Manufacturer:: HELLER

Model:: MC 2000

Year of construction:: 2011

Condition:: good (used)

Price & Location

Location:: 38820 Halberstadt

Call

Details about the offer

Listing ID:: A20754172

Reference number:: 10598

Update:: 22.04.2026

Description

Ref. -No.: 10598
Manufacturer: HELLER
Type: MC 2000
Year of construction: 2011
Type of control: CNC-Steuerung
Control: Siemens 840 D sl
Storage location: Halberstadt
Country of origin: Hermany
Machine-No.: 50XXXX
X-Travel: 800 mm
Y-Travel: 800 mm
Kdsdjx Hn D Rjpfx Aa Ien
Z-Travel: 1000 mm
Work spindle torque (25% ED): 242 Nm
Tool Taper: SK 40
Numbers Of Tools In Magazin: 54
Tool Piece Magazine With: 80 Pcs./pcs.
Turning Speeds: 10000 RPM
Drive Capacity - Spindle Motor: 17 kW
High-Pressure Pump: 50 bar
Speed range - main spindle: 10000 RPM
Numbers Of Pallets: 2
Size Of Pallet: 630 x 500 mm
Weight Of The Machine Ca.: 13000 t
spindle running time: 7000 H
Operating hours: 14000 H
Preparation area: 4 x 90°
hydraulic pressure: 200 bar

Further information:
- The machine has been measured
- The geometry is in excellent condition
- The spindle runs a little rough
- Clamping towers and cutting tool holders are also included
- 2 additional clamping towers
- 2 replacement pallets
- 2-axis servo tool changer
- Scraper conveyor for dry machining
- Cold light in the work area
- Central cooling unit for motor spindle and control cabinet
- Control unit at the workpiece setup station
- NC-controlled rotary table
- Clamping hydraulics

The machine can be viewed under power by appointment.

Seller

Registered since: 2017

108 listings online

Call

Send inquiry

Telephone & Fax

+49 208 4... show

These listings may also fit your interest.

Listing

CNC - Machining Center - Horizontal HELLER H - 2000

Halberstadt

1,309 km

CNC - Machining Center - Horizontal
HELLERH - 2000

Call

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Kdjdpfxjx Hn D De Aa Ion Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

See details

Listing

Contamine-sur-Arve

1,321 km

Swiss-type cnc lathe
BOLEYBC20-VI

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 Kdedpsuha Umjfx Aa Ien POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

See details

Listing

CNC turning and milling center Nakamura-Tome NTJX

Root

1,371 km

CNC turning and milling center
Nakamura-TomeNTJX

Call

Listing

CNC Turning- and Milling Center Emco MaXXturn 110 - Serienversion 2500

Germany

1,293 km

CNC Turning- and Milling Center
EmcoMaXXturn 110 - Serienversion 2500

Call

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Kdodpfx Ajw Dfhuoa Ijn

See details

Listing

Gear Hobbing Machine - Vertical LIEBHERR LC380

Unterschleißheim

1,499 km

Gear Hobbing Machine - Vertical
LIEBHERRLC380

Call

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min Kdjdpfx Aeyt Rvhsa Isn diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

See details

Listing

Grinding Wheel Profiling Device FAESSLER DSA EE 400

Malsch

1,258 km

Grinding Wheel Profiling Device
FAESSLERDSA EE 400

Call

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: Kodjvibc Hepfx Aa Isdn NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

See details

Listing

Germany

1,414 km

Gear Grinding Machine
REISHAUEROZA

Call

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Kdjdpfx Aaovc Apbj Ijn Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

See details

Listing

Star SR-20J type C STAR Micronics SR-20J type C

Italy

1,192 km

Star SR-20J type C
STAR MicronicsSR-20J type C

Call

Condition: ready for operation (used), Year of construction: 2015, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,200 kg, total height: 1,700 mm, workpiece diameter (max.): 32 mm, number of axes: 7, This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning. Additional equipment • High Pressure Coolant System: Hydrajet BF20-2000 • Mist Extraction Unit: Absolent A.Mist 10S • Fire Suppressor: Stat X • Signal Production Tower: Werna Machine Benefits Qualitative Machine Benefits • Includes comprehensive safety and environmental management systems (fire suppressor, mist extraction) Technical Machine Benefits • Rapid feed rate 24m/min, maximum spindle speed 7000 rpm, maximum driven tool speed 6000 rpm Extra Information Manuals included Machine still under power Dimensions Machine Depth 2250 mm Kodpfsyi Emtsx Aa Iodn

See details

Listing

3-D Coordinate Measuring Machine Mitutoyo Crysta Apex C7106

Mönchengladbach

1,031 km

3-D Coordinate Measuring Machine
MitutoyoCrysta Apex C7106

Call

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Kdsdsvpdhxepfx Aa Ien Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Leasing possible. (All prices are NET)

See details

Listing