Used Heller Baz for sale (68)

Condition: ready for operation (used), Year of construction: 2009, Main Drive Number of axis 4 This 4-axis HELLER MCH 250 was manufactured in 2009. A horizontal machining centre with a voltage of 400 V, frequency of 50 Hz, and a rated current of 123 A. If you are looking to get high quality milling capabilities consider the HELLER MCH 250 machine we have for sale. Contact us for more information. Hodpfxoxnr D Ij Aacefn Application Types Milling

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 31-45722, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 3,700 mm, total length: 6,500 mm, total width: 4,000 mm, overall weight: 20,000 kg, mount diameter: 40 mm, plate length: 600 mm, plate width: 500 mm, CNC horizontal machining center Hfsdpfx Aaexm Untocsn TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 100 A Includes dual pallet changer Includes coolant system from KNOLL Note: The clamping tower visible on the pallet is not included in the scope of delivery PICKUP INSTRUCTIONS: Note: The machine can be transported on a low-loader up to 3000 mm wide Pick-up must be firmly scheduled between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Hfjdpoxmfa Hsfx Aacen Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Heller CPU91 CNC G 23 Uni Pro CNC 90 Board used 100 % functional Hsdpei Ea E Aefx Aacefn

Condition: used, Year of construction: 2018, Heller HF3500 Base Machine HF 3500 APC Equipment Package POWER NC Swivel Rotary Table for 5-Axis Machining with Tilted Rotary Axes Travel Paths X710/Y750/Z710 Plane Transformation (CYCLE800) Tool Extraction Execution in accordance with EC Machinery Directive with Declaration of Conformity and CE Marking Precision Water-Air Cooling Unit (Compressor cooler for cooling the direct drives of A- and B-axes as well as for spindle and control cabinet cooling) HSK-A 63 Tool Holder according to DIN 69 893 Standard control panel at the tool setup station (chain) Workpiece setup station, pallet manually rotatable and lockable in 90° increments (cannot rotate freely with media interface) Workpiece clamping mechanical Two pallets as zero-point clamping systems with DIN hole pattern in base machine Scraper belt conveyor for wet machining Main control console in desk design with 24" screen with multitouch function and “HELLER Operation Interface” Equipment/Accessories PC 63 i Power Cutting Unit (12,000 rpm, 45 kW, 228 Nm) Hedpfjxnqguex Aacefn Receiver for wireless probe, make RENISHAW (incl. HELLER measuring cycles only with Siemens) Wireless probe with tool holder and probe insert, make RENISHAW RMP 60 Tool magazine with 80 places, chain version Fast drill breakage detection Comfort control terminal at tool setup station (chain) Enforced-Drive in A – Reinforced torque drive for the A-axis (for simultaneous 5-axis machining) Coolant purification system, paper band filter TMF600, ICS 70 bar with frequency-controlled high-pressure pump, work area rinsing Coolant chiller (water-air / type: compressor) Extraction system for emulsion Door window air blow device for work area door Siemens SINUMERIK ONE Process-integrated tool monitoring (IPM) LED status light red - yellow - green Technology package milling (ONE Dynamics 5 axes) Collision avoidance strategy AutoCal (Automatic Calibration) Handheld control device SINUMERIK HT 2, make Siemens Interface for handheld control device Extension package Standard-MF-II PC keyboard for main control console Extension to 4 pallets Additional equipment not included in the purchase price (available separately) Hyper Mill post-processor 3D machine model STP

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible. Hfsdpfsxmkb Nex Aacen

Condition: ready for operation (used), Year of construction: 1987, General Data Machine weight 9000 kg Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 560 mm Z-Axis Movement 630 mm Hodsxirglspfx Aacefn Table Table load 2500 kg This 4-axis HELLER PFU2 was manufactured in 1987. A vertical machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking to enhance their machining operations with a reliable, used machine. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2018, x-travel 710 mm y-travel 750 mm Hfedpfjxc Nzajx Aacjn z-travel 710 mm Control Siemens 840D sl

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Hfjdpfx Aasxmfatjcjn Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 Hfjdpfxourkype Aacjn -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: used, We are offering a Heller drilling machine, model RB 32/800, for sale. The machine is in good technical condition and ready for immediate use. Hsdpfx Aasu Tt Dlocefn

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern Hfodpfx Aaow Sygmscsn weight of the machine ca. 1,4 t

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand SIEMENS Model 840 D Main Drive Spindle speed range 12000 Additional Equipment Hjdpfxjxf N Rgs Aacefn Pallets: 22 of size 800x800 It is a system composed by a HELLER MCH 300 and a HELLER MCH 300 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 300 reaching up to 12,000 RPM and the MCH 300 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 300 + MCH 300 C horizontal machining centre system. Contact us for more information about this system. Application Types Milling

Year of construction: 1985, condition: used, largest surface to be machined: 400 x 300 mm speed of the knife spindle infinitely variable: 1600 - 6000 rpm Hfedpfxjb Nxdvo Aacon electrical connection: three-phase current 380 V space requirement: 900 x 800 x 600 mm

Condition: good (used), Year of construction: 2018, Ref. -No.: 10597 Hjdpfx Ajxl N T Ijacofn Manufacturer: HELLER Type: HF 5500 DL Year of construction: 2018 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Germany Machine-No.: 560XXX X-Travel: 900 mm Y-Travel: 950 mm Z-Travel: 930 mm Main spindle speed range: 10000 RPM Table surface: Ø 810 mm Tool change time (chip-to-chip): 3,3 s Tool Taper: HSK - A 63 Tool Piece Magazine With: 54 Pcs./pcs. Max. Workpiece height: 870 mm Rapid Traverse X-Axis: 90 m / min Rapid Travel Y-Axis: 90 m / min Rapid Traverse Z-Axis: 80 m / min X - axis acceleration: 10 G Y - Axis acceleration: 10 G Z - axis acceleration: 8 G Drive Capacity - Spindle Motor: 17 kW Max. Workpiece diameter: Ø 900 mm Further information: - NC swivel rotary table with counter bearing for 5-axis machining with angled rotary axes - Rotary table and swivel axis with highly dynamic torque drives - Mechanical workpiece clamping - SC 63 MS Speed Cutting unit (18,000 rpm, 47 kW, 100 Nm) - Receiver for radio measuring probe, manufactured by RENISHAW

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Hfodsuxdhujpfx Aacjn

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Working Area Hfedjwx Er Nspfx Aacsn Working envelope (X/Y/Z): 450 × 450 × 450 mm Maximum workpiece height: 700 mm Pallet size: 320 × 320 mm Maximum pallet/table load: 300 kg Spindle Number of spindles: 2 Tool spindle: 10,000 rpm, 95 Nm Speed extension: 18,000 rpm Tool interface: HSK 63 Feed Acceleration: 10 m/s² Rapid traverse: 60 m/min Chip-to-chip time: 2.6 s Tool Magazine Tool positions: 2 × 60 Tool magazine with 60 positions: included MACHINE DETAILS Weight Machine weight: approx. 14 t Control Control system: Siemens Sinumerik 840D EQUIPMENT Double-spindle, 4-axis horizontal machining center 4 machine pallets Renishaw probe Infrared receiver for probe, Renishaw model Vaf72a0p Operator panel at workpiece setup station Operator panel at tool setup station Workpiece setup stations manually rotatable Hydraulic workpiece clamping, 60 bar Pneumatic support control at workpiece setup stations Automatic swing door Extended coolant supply 70 bar / 1,500 l VF 250 coolant chiller Work area flushing Emulsion mist extraction Roto-Clear Automatic setup sequence Automatic teardown sequence Run-time and quantity recording Status lamp, 3 colors Modem for remote diagnostics Control cabinet lighting

Condition: used, Year of construction: 1999, control Siemens 840D Number of axles 4 St. 2 toll turrets 160 tool taper HSK 63 spindle turning speed range 24.000 U/min filter unit Ja chip conveyor Ja kW Hfedpfeqn A Rvex Aacen

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,000 h, Control Unit Brand SIEMENS Model 840D Tools Type of tool holder SK 40 DIN 69 871 Additional Equipment Hsdpfoxg Ungjx Aacefn Operating voltage: 400 V, 50 Hz This HELLER H2000 was manufactured in 2017. It features a robust SIEMENS 840D solution line control system and a tool magazine with 80 positions. The machine includes a NC rotary table and a coolant purification system with a 50 bar internal supply. Ideal for precision machining with its advanced spindle technology and 3,000 operating hours. Consider the opportunity to buy this HELLER H2000 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: new, Heller Uni Pro ACPU90-S8M E 23 < unused > in sealed original packaging 100% functional Hedei Ea Efepfx Aacjfn

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D sl Main Drive Spindle speed range 9000 Hfsdew Tnn Uopfx Aacon Stroke 200 mm Number of axis 3 Control Unit Brand SIEMENS Model 840D sl Main Drive Spindle speed range 9000 Stroke 200 mm Number of axis 3 This 3-axis HELLER PT 16 was manufactured in 2016. It features a multifunction spindle driven by a compact servo motor, achieving speeds up to 15 m/min and a maximum of 9,000 rpm. The machine offers a 200mm stroke in 3 axes with ball rail guides and screws for enhanced precision. Consider the opportunity to buy this HELLER PT 16 CNC milling machine. Contact us for more information about this machine. Application Types Milling

Condition: new, Heller SL90 F A 23 slide-in card Uni Pro CNC 90 < unused > in opened OVP 100 % functional Hsdpfxji Ea E Rs Aacofn

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand SIEMENS Model 840D Solution line Main Drive Number of axis 4 Movement X-Axis Movement 630 mm X-Axis Rapid Traverse 60000 mm/min Y-Axis Movement 630 mm Y-Axis Rapid Traverse 60000 mm/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 60000 mm/min Table Table load 600 kg Tools Type of tool holder HSK 63 A Media Chip conveyor Yes Additional Equipment Chip conveyor Coolant filtration with paper filter KF 400 Through-spindle coolant, 50 bar Work area flushing Hfjdpfjxaqitox Aacsn This 4-axis HELLER H2000 horizontal machining center was manufactured in 2017. It features a Siemens 840D Solution Line control, rapid traverse of 60,000 mm/min, and a spindle speed of 10,000 rpm. The machine can handle workpieces up to 720 mm in diameter and 850 mm in height, with a maximum table load of 600 kg. Consider the opportunity to buy this HELLER H2000 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Heller B 23, Heller 20.003 card used good condition 100% functional Hedpfei Ea Eqjx Aacefn

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Main Drive Spindle speed range 10000 Spindle motor power 17 kW Number of axis 3 Additional Equipment Scraper belt conveyor for dry machining Cold light in the work area Central cooling unit for motor spindle and control cabinet, CFC-free This 3-axis HELLER MC 2000 was manufactured in 2011 and features a robust three-phase motor spindle, delivering 17 kW at 10,000 rpm with a SK 40 tool holder. It includes a 2-axis servo tool changer, a stationary tool magazine with 54 positions, and a pallet changing device with 2 pallet positions. If you are looking to get high-quality milling capabilities, consider the HELLER MC 2000 machine we have for sale. Contact us for more information about this machine. Hfodpfow E Rnisx Aacen Application Types Milling