Used center lathes 300-399mm turning diameter over bed for sale (191)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Center distance: 635 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Speed steps: 12 Speed range: 40–2,500 rpm Gedpfxszz Rm Is Amyeug Taper in tailstock: MK 3 Tailstock quill travel: 110 mm Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Godpfxjy Nfqms Amysug Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: HK06, spindle bore: 48 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, overall weight: 800 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 7 A, WEILER PRAKTIKANT GS Lead and Feed Spindle Lathe - Connection: 5.5 kVA - Distance between centers: approx. 700 mm - Center height above bed: 160 mm - Turning diameter above bed: 320 mm Guodpfx Amozxzmyoyeg - Center height above cross slide: approx. 100 mm - Turning diameter above cross slide: approx. 200 mm The machine is equipped with a tailstock, a Multifix tool holder, and a quick-change chuck, including a three-axis digital display from the manufacturer FAGOR. FCA D-72589 Westerheim - loaded onto a truck.

Condition: good (used), turning diameter over cross slide: 200 mm, spindle bore: 32 mm, turning diameter over bed slide: 315 mm, center width: 600 mm, turning length: 560 mm, quill stroke: 140 mm, overall weight: 1,750 kg, Digital display, Heidenhain Guodpezzpx Njfx Amysg Collet system E163

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 215 mm, spindle bore: 41 mm, turning diameter over bed slide: 380 mm, turning length: 1,000 mm, total length: 2,900 mm, total width: 1,050 mm, total height: 1,410 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 30 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, The lathe underwent a general overhaul in 2011 by M-MOOS spol. s.r.o. During the overhaul, it was fitted with an Omron Varispeed 7 frequency converter for convenient speed regulation during operation and to reduce current surges. The lathe's accessories include: a fixed and a movable steady rest, a faceplate, 2 chucks, a clamping angle, a rotating center for the tailstock (Morse 4), a micrometric stop for longitudinal and transverse feed, 1 coolant system with a pump, and an operating manual. Technical parameters: swing over bed 380 mm, swing over carriage 215 mm, distance between centers 1000 mm, bed width 340 mm, spindle bore 41 mm, spindle taper metric 50, tailstock center taper MORSE 4, spindle speed range 30 - 2800 rpm, main DC motor power 10 kW, maximum machine dimensions: length: 2900 mm, width 1050 mm, height 1410 mm, machine weight 2000 kg. The overhauled lathe was used for maintenance purposes by a large manufacturing company. The machine can be tested in our warehouse in Přerov by appointment. Gusdpszy Shwjfx Amyeg

Condition: used, Control: FANUC 0i-TD YOM: 2014 B-axis Max: 830° X-axis Travel: 243 mm Y-axis Travel: 50 mm Z-axis Travel: 740 mm Chuck Dia 10” Max. Workpiece Diameter: 350 mm Spindle Speed: 4000 RPM Max. Bar passage: Ø 64 mm Tool turret: 12 positions Tool attachment: bmt-65 Sub Spindle chuck Dia 6” Sub spindle speed: 6–6000 rpm Spindle nose: a2-8 Sub spindle nose: a2-5 Complete with swarf conveyor Machine Depth: 2080 mm Gusdpfx Amszy Iquoyjg Machine Weight: 9600 kg

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop Gjdpfozvx A Tsx Amyeug -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, spindle bore: 51 mm, – Maximum turning diameter: 1000 mm – Turning diameter over bed: 360 mm – Turning diameter over cross slide: 230 mm Gusdpfx Aoz Altrjmyog – Spindle bore: 51 mm – Infinitely adjustable spindle speed – Longitudinal and transverse feed – Sino digital display for 2 axes – Cooling system – Lighting – Safety guard – Fixed steady rest – Follower rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: ready for operation (used), Optimum lathe D330 x 1000 SG -Distance between centers: 1000 mm -Swinging diameter over bed: 330 mm -Swinging diameter over cross slide: approx. 190–200 mm -Spindle bore: approx. 38 mm -Speed range: approx. 70 – 2000 rpm (stepped) Godpfoztdv Tox Amyeug -Feeds: longitudinal and cross, automatic -Thread cutting: Metric / Inch -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock: MK3 -Spindle: MK5 -Work light -Three-jaw chuck -Multifix system with 1 steel holder -Machine feet -Chuck guard Dimensions: L x W x H 1.9 x 0.7 x 1.5 meters / Weight 700 kg

Condition: good (used), functionality: fully functional, turning diameter over bed slide: 335 mm, center height: 165 mm, turning length: 635 mm, swing diameter over cross slide: 210 mm, rotational speed (max.): 1,800 rpm, quill mount: MK 3, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Colchester • Model: Student-1800 • Distance between centers/turning length: approx. 635 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm Guodpfxozlcrqj Amysg • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 1800 rpm • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm • Spindle nose: 4 in. D.1. Camlock • Tailstock spindle: MK3 • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire, providing your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Manufacturer: 600 Lathes Model: Harrison V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Width in front of Face Plate: 165 mm Distance between Centres: 650 mm Spindle Speeds (stepless via potentiometer across 3 ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Spindle Motor: 7.5 kW Carriage Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Quill Taper: MT4 Quill Diameter: 63 mm Metric Version Machine Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-Axis Digital Readout 3-jaw Chuck Röhm D:200 mm 4-jaw Chuck D:160 mm Collet Chuck System Steady Rest 4-position Quick Change Toolpost Live Centre Chuck Guard Additional Chip Shield on Carriage Coolant System Rear Splash Guard Machine Documentation incl. Schematics Dimensions: Floor to Spindle Centre: 1050 mm Overall Length: 1900 mm Gujdpfexcuuljx Amyeg Overall Width: 1100 mm Overall Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site by arrangement. All details without guarantee. Errors and prior sale reserved.

Condition: excellent (used), Lathe Guodpfx Aszzrt Nemyjg

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR lathe, from an educational institution -Maximum turning height 180mm -Maximum turning length 1000 mm -Spindle bore 56 mm -Speed range 56 - 2000 RPM -Automatic longitudinal/facing feeds -Threading capabilities / Metric / Inch etc. Gsdjzww D Eopfx Amyeug -Tailstock MK 4 -Three-jaw chuck 200mm -Multifix base with inserts -Electric chuck guard -L & Z spindle cover -Work light -Coolant system -2 x Emergency stop -Machine documentation Dimensions: L x W x H 2.5 x 1.1 x 1.7 meters / Weight 1500 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed 365 mm, over cross slide 225 mm Turning length 750 mm Center height 185 mm Spindle bore 40 mm Spindle flange KK5 (DIN 55022) Spindle bore MK5 Speed range 20 – 1,600 rpm Digital display Heidenhain VRZ 773 B in 2 axes (Scales on the cross slide and longitudinal slide) Dimensions 1,900 x 900 x 1,700 mm Spindle brake with foot pedal Adjustable stop on the cross slide (feed shut-off) Splash guard Accessories: - Operating manual - Multifix B holder with 2 inserts - Coolant pump integrated in the machine base (no coolant hose connected) - 3-jaw chuck Röhm 200mm with turning and drilling jaws Weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected while powered on. Gedpfx Aow Svtcsmyjug All information is without guarantee, errors and omissions excepted; all dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Changes and errors in the technical data, specifications and prices, as well as prior sale, are reserved! All prices are net plus VAT. Payable by prepayment, including any freight costs, within 14 days after conclusion of the contract. If the purchase price is not paid in full within this period, the seller reserves the right to cancel the purchase contract. The sale is only made to entrepreneurs within the meaning of § 14 BGB. The machine is sold with exclusion of any warranty for defects. This exclusion does not apply to claims for damages arising from warranty for defects, which are based on a gross negligent or intentional breach of obligations by the seller or his agent, as well as in the event of injury to life, body and health. Any existing claims against third parties arising from warranty for defects are assigned to the buyer. Please understand that I cannot assume any liability for compliance with any safety regulations that may apply to you and are generally required for the sold machine and its components. Such compliance with safety regulations is the responsibility of the final operator. German law shall apply exclusively to all contracts concluded by me, to the exclusion of the UN Sales Convention. Mannheim is agreed as the place of jurisdiction.

Condition: used, Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Guodpfx Amszwdc Isyjg Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Condition: used, Year of construction: 2011, gebraucht 2011 010192 prompt, Zwischenverkauf v Deutschland 24100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout Gujdpfxsyxxyae Amyeg NEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments) Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Gsdpfxjzp Nkns Amyeug Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: used, Year of construction: 2015, gebraucht 2015 1686 prompt, Zwischenverkauf v England 14800 € 1 330 mm 1000 mm 167 mm 38 mm 210 mm 12 40 - 2500 1/min 16 0.03 - 1 mm/U 0.2 - 14 mm 2 - 56 TPI Gänge/" 190 mm 92 mm Gusdpfx Aswiqv Ijmyog 42 mm 3 MK 110 mm 2.2 kW 1940 mm 1000 mm 1550 mm 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1973, turning diameter over bed 630-640 mm turning diameter over slide rest ca 380 mm Gusdpfx Aeztfwrsmyeg turning length ca 2000-4000 mm total power requirement 15 kW weight of the machine ca. 7-8 t

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 22100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 Guodpfx Asyxxygomyjg 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 67 rpm, Colchester Master 2500 40" between centres Spindle speeds 30-2500rpm Imperial dials Gsdpfx Amszphivsysug 2 axis DRO Coolant pump and system Morse taper 3 tailstock Spindle bore 40mm Quick change tool post Comes with 4 jaw 10" 3 jaw with reverse jaws 8" 12" face plate Drive dog plate 4 x quick change tool holders

Condition: good (used), functionality: fully functional, spindle bore: 56 mm, turning diameter: 460 mm, JESSEY 1850 ENC CNC Teach-In Lathe — For Sale Reliable Taiwanese-built teach-in CNC lathe equipped with an Anilam 4200T control. Ideal for both manual and programmed turning operations, well suited for workshops that need the flexibility of conventional turning combined with full CNC capability for repeat work. Key features - Anilam 4200T CNC control with Teach-In mode - Heavy-duty spindle with generous bar capacity - Long bed for shaft and large-component work - Tailstock included Guodpfxsy Hmils Amysg Technical specifications CNC control: Anilam 4200T Distance between centres (turning length): 1250 mm Swing over bed: 460 mm Max. turning diameter: 460 mm Spindle bore (bar capacity): 56 mm Spindle motor power: 7.5 kW Max. spindle speed: 1800 rpm Tailstock: Yes

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe Gusdpsztwwkjfx Amyog - Connection: 4 kW - Rated current: 9.5 A - Distance between centers: approx. 900 mm - Distance between centers above the bed: approx. 170 mm - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1986, Available immediately from a workshop for disabled people: Guodpfozyggujx Amyeg L & Z lathe, Imatec Type ID 175 Year of manufacture 1986 Center height 175 mm Diameter over bed 350 mm Diameter over carriage 210 mm Distance between centers 1000 mm Spindle bore 41 mm Spindle speeds 35.5 – 1600 rpm Digital display Chuck Faceplate Multifix with holders Coolant system Drive power 3 kW Weight 1700 kg Price: EUR 1,750.00 plus VAT, ex works.

Condition: used, Year of construction: 2003, turning diameter over bed 330 mm centre distance 1.000 mm centre height 167 mm spindle bore 38 mm turning diameter over cross slideways 210 mm spindle tunring speed 40 - 2.500 U/min x-axis 190 mm z-axis 92 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Guedpfxsy Ty I Io Amyog Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!