Center lathe

Colchester Student-1800

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm Rcjdeyrh Apjpfx Achsf centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Rcsdpjx E Um Nsfx Achjf Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Rcjdpsrzq Arofx Achsf Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Rcsdpeypud Usfx Achjf

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Rcsdpov Uvftefx Achef Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point Rcodjy Hxp Dspfx Achsf chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right Redpfx Acsxacgdshscf - machine swing feet - original operating instructions

Condition: used, Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Rcedpezgcp Sofx Achef Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Rsdpfxjx Sqvgj Achocf

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed 365 mm, over cross slide 225 mm Redpfjw Svtcox Achocf Turning length 750 mm Center height 185 mm Spindle bore 40 mm Spindle flange KK5 (DIN 55022) Spindle bore MK5 Speed range 20 – 1,600 rpm Digital display Heidenhain VRZ 773 B in 2 axes (Scales on the cross slide and longitudinal slide) Dimensions 1,900 x 900 x 1,700 mm Spindle brake with foot pedal Adjustable stop on the cross slide (feed shut-off) Splash guard Accessories: - Operating manual - Multifix B holder with 2 inserts - Coolant pump integrated in the machine base (no coolant hose connected) - 3-jaw chuck Röhm 200mm with turning and drilling jaws Weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected while powered on. All information is without guarantee, errors and omissions excepted; all dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Changes and errors in the technical data, specifications and prices, as well as prior sale, are reserved! All prices are net plus VAT. Payable by prepayment, including any freight costs, within 14 days after conclusion of the contract. If the purchase price is not paid in full within this period, the seller reserves the right to cancel the purchase contract. The sale is only made to entrepreneurs within the meaning of § 14 BGB. The machine is sold with exclusion of any warranty for defects. This exclusion does not apply to claims for damages arising from warranty for defects, which are based on a gross negligent or intentional breach of obligations by the seller or his agent, as well as in the event of injury to life, body and health. Any existing claims against third parties arising from warranty for defects are assigned to the buyer. Please understand that I cannot assume any liability for compliance with any safety regulations that may apply to you and are generally required for the sold machine and its components. Such compliance with safety regulations is the responsibility of the final operator. German law shall apply exclusively to all contracts concluded by me, to the exclusion of the UN Sales Convention. Mannheim is agreed as the place of jurisdiction.