Used center lathes 0-299mm turning diameter over bed for sale (113)

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence Hjdpeu Aftgofx Afceff >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Hfjdevtp Edopfx Afcef Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm Hfjdpsvivmyofx Afcsf >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1995, Digital display Turning diameter 120 mm Hfsdpfxowhrg Sj Afcef Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1306.00.05, spindle bore: 26 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 50 rpm, GDW Lead and Feed Screw Lathe LZ280G – Used but Powerful! For sale is a robust and precise GDW LZ280G lead and feed screw lathe, ideal for workshops, training centers, or single-part production. 🔧 Technical Data (excerpt): Model: LZ280G Manufacturer: GDW – Gustav Dermentz Machine Tools Distance between centers: 500 mm Center height: 140 mm Swing over bed: 280 mm Spindle bore: 26 mm Speed range: 50–2800 rpm Machine weight: approx. 750 kg Hfjdpfoxtbbajx Afcof ✅ Features & Condition: Equipped with 3-jaw chuck, live center, and change gear set Includes machine lamp and splash guard Very well maintained, regularly serviced Ready for immediate use 📍 Location: Porta Westfalica 📦 Inspection by appointment possible We are happy to answer any questions you may have.

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen - Hfodpjpz Hubsfx Afcof

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive Hsdpfx Aocug H Ssfcsff L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, quill stroke: 120 mm, quill diameter: 75 mm, total length: 1,000 mm, total width: 850 mm, total height: 1,900 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, spindle mount: MK 3, drilling capacity: 32 mm, nominal power: 0.75 kW (1.02 HP), table length: 730 mm, table width: 210 mm, throat depth: 270 mm, Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 32 mm, motor 0,75, cross table size 730x210 mm, spindle speed 50-2500 rpm, MT-3, tapping device, machine lamp, coolant device, tapping device, dimensions 100x850x1900 mm, weight ca. 400 kg Hfodpfx Afsx Ebi Ijcof

Condition: like new (used), Year of construction: 2012, Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Hfedpfx Afjwx Rm Escef Tailstock: CM2 Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Condition: excellent (used), Year of construction: 1998, Parallel Lathe WABECO D6000E Between points: 600 mm Hfodpfxexpuhxj Afcef Maxi Ø on bench: 270 mm Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - C axis indexing precision : 0.001 [°] - Z stroke : 445 [mm] TURRET 1 - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 105/400 [mm] - Y stroke : 120 [mm] - B Axis stroke : +90/-270 [°] - Tool type : VDI 25 - Live tools speed : 6000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4.975 X 2.890 [mm] Hjdpfxju Hadho Afceff - Machine height : 2.050 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840C - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Hfsdpfxsxykafs Afcof Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: used, Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Automatic Tool Presetter, Belt-Type Chip Conveyor, Tailstock with Hydraulic Quill, User-Definable Macros, Visual Part Programming System, Part catcher. Hfedexp Hn Djpfx Afcjf