Used CNC lathes up to 199mm turning diameter for sale (336)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW Hedpfx Apozim Ecjnofi • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2002, Swing diameter over bed: 350 mm Swing diameter over carriage: 180 mm X-axis travel: 155 mm Hodozl Tkkspfx Apnofi Z-axis travel: 800 mm

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Hfjdpjt Hwz Aofx Apnsi CNC-lathe with bar feed with Sameca bar feed

Condition: excellent (used), Year of construction: 2015, turning diameter 100 mm Hsdpfx Ajy T R Rtepnefi turning length 75 mm control FANUC Oi-TF total power requirement 15 kW

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Siemens control system, 12-station turret (VDI16), collet chuck, Hedpfjzkk Hyjx Apnjfi jaw chuck, steady rest, driven tools, accessories

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h • Finished parts counter: 250 Hjdpfx Asy R Dh Tspnjfi • M30 counter 1: 1577 • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A • Largest load: 18 A • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) • Memory: 1 GB Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, operating hours: 9,554 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details. • Condition: In good condition • Usage: Motion Time 54,567 h; Servo Time 62,795 h • Spindles: Dual spindle (sub-/counter spindle; rarely used) • Turret: 12-station bolt-on turret (BMT65 style) • Capabilities: Y-axis milling, live tooling • Electrical: 360–480 V, 3-phase, 50/60 Hz; Full load amps 40 A; Largest load 70 A; Short-circuit interrupting capacity 10,000 A Additional equipment • Chip conveyor (Jorgensen) • Mist collector: SARA Ultra-Jet 2 SD • Parts catcher • Coolant hose • Foot pedals • Samchully MH-206V1 as a counter-spindle chuck Technical Specification Counter Spindle Yes Hfjdpfx Apoy R Dikonoi Driven Tools Yes

Condition: good (used), Year of construction: 1999, 1 Muratec MT12 CNC lathe with dual spindle and dual turret Hfodsy Ta Stepfx Apnei Fanuc CNC control Year: 1999 Supplied with all tooling and tool holders.

Condition: good (used), Year of construction: 2008, 1. 2008 MW120 MURATEC CNC twin-spindle, twin-turret lathe, including: Hjdpfey Ta Eyox Apnsfi 2. Integrated manipulators

Condition: good (used), Year of construction: 2005, 1. Two-spindle, two-turret CNC lathe, MW120 MURATEC, manufactured in 2005, including: 2. Two integrated manipulators. Hedpfey Ta Egjx Apnefi

Year of construction: 2006, condition: good (used), CNC Swiss turn Machine type: Gildemeister GD32-6 Control: GE Fanuc Series 16i-T Year: 2006 SPECIFICATIONS Turningdiameter: 33 mm Hfjdpfx Apsziy Azsnoi Z-Axis: 320 mm Rapid motion: (X/Z): 30 m/min Max. auswerfen: ca. 190mm Max. revolution: 8.000 rpm Spindle power: 5,5 / 7,5 kW Tool capacity: 5+3 Req. space (LxBxH): 3,08 x 1,51 x 1,75 m Machine weight: 4.200 kg Equipment Bar loader magazine: Iemca

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,950 kg, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2006. This DMG GILDEMEISTER CTX 310 features a maximum spindle speed of 6000 rpm and a tool turret with 12 stations. With a power capacity of 24 kVA, this machine is designed for efficient performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTX 310 machine we have for sale. Contact us for further details. - Total Power On Hours (Counter 1): 21887.4 h- Spindle/Run Hours (Counter 2): 11066.2 h- Power Capacity: 24 kVA- Max Current: 35 A (Jn max) / 38 A- Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 24 V Technical Specification Counter Spindle No Driven Tools Yes Hsdezh E Akspfx Apnefi

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N Hfodpfx Aozh Eh Tspnoi • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 Hjdox D Ibbepfx Apnefi • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information Machine still under powerThe machine has been working effectively in 1-shift operation since it was purchased/ Optional euipment (extra charge):The chuck incl. hard & several sets of soft jawstailstocktools steady rest The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 2,244 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 610 mm, overall weight: 2,530 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1998. This KOVOSVIT MAS OPTIMAT A50CA weighs 2530 kg and includes a bar feeder system with a long loading channel attached to the machine. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. - Weight: 2530 kg- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Special feature: Iemca loading magazine- Included Components: Bar feeder system (long loading channel attached to the machine) Technical Specification Hfodpfxozhw H Ue Apnoi Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, controller model: Series 0i-TF, number of slots in tool magazine: 12, number of axes: 2, This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information. Additional equipment • Turret with Direct Mount (12 stations) • High-Precision Linear Guides on All Axes • Coolant System • Hydraulic System • Full Enclosure • Automatic Lubrication System • Signal Lamp (3-color) • Work Area Lighting • Automatic Machine Shutdown (via M-Code) • Automatic Chuck Operation Machine Benefits Hfodpoyuwypjfx Apnji Qualitative Machine Benefits • Prepared for a live center with mk4 mount • Tool monitoring system: load monitoring • Control cabinet with heat exchanger • Foundation and leveling accessories • Set of auxiliary tools • Machine documentation • Ce certification • Renishaw-hpra measuring arm • Stable 30° slant bed design for versatile, precise, and cost-effective machining solutions. • Machine connection data: compatible with clamping device 2703 / 0007, chuck connection to standard spindle, spindle standard: din 55026, short taper size 5/6 Technical Machine Benefits • Max turning length: 500 mm • Control: FANUC Series 0i-TF • Pinole diameter: 70 mm • Programmable quill travel: 150 mm • Tailstock travel: 290 mm • Reinforced coolant pump (pressure: 20 bar) • Parts catcher for main spindle • Transport conveyor for finished parts • 8 additional m-functions • Interface for bar loader • Bar loader: barload bk105 Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Hsdpfx Apozhwx Dsnsfi • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes Hfodpfx Aozhwlqspnsi

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,818 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 310 mm, overall weight: 2,505 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 2002. This KOVOSVIT MAS Optimat A42 features a robust design with a weight of 2505 kg and a total power consumption of 12 kVA. It is equipped with a manual guide bar/tube loading support system for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS Optimat A42 machine we have for sale. Contact us for further details. - Main Phase Voltage: 3x 400 V ~- Rated Current: 26 A- Total Power Consumption: 12 kVA- Frequency: 50 Hz- Control Circuit Voltage (AC): 110 V ~- Control Circuit Voltage (DC): 24 V =- Machine Lighting Voltage: 220 V- Machine Lighting Wattage: 2x 20 W- Control: Curve- Spindle diameter: 42 (50) mm- Spindle speed: 85 – 2,818- Number of tools: 4 side-cutting tools- 6 tool stations on the turret- Schematic / Diagram Reference: SCH 338 / 40004 - 34- Bar Feed Equipment: Fitted with manual guide bar/tube loading support system Technical Specification Counter Spindle No Hsdjzhwcpspfx Apnjfi Driven Tools No

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, overall weight: 2,520 kg, spindle speed (max.): 2,244 rpm, number of slots in tool magazine: 6, number of axes: 3, This 2-axis KOVOSVIT MAS Optimat A52 was manufactured in 2003. It has a machine weight of 2520 kg and includes a bar feeder guide tube system, tool turret station, and cooling fluid hose lines. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS Optimat A52 vertical horizontal turning machine we have for sale. Contact us for further details. Hjdpfx Apezhwazsnofi - Main Voltage: 3x 400 V ~- Frequency: 50 Hz- Full Load Current: 25 A- Total Power Capacity: 12 kVA- Control / Auxiliary Voltages: 110 V ~ / 24 V = / 230 V- Lighting Power: 2 x 20 W- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Wiring Diagram Reference (SCH): 338 / 49004 - 34- Included Equipment: Bar feeder guide tube system, tool turret station, cooling fluid hose lines Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1994, spindle speed (max.): 2,244 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 500 mm, overall weight: 2,490 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1994. This KOVOSVIT MAS OPTIMAT A50CA features a robust design with a machine weight of 2490 kg. It includes essential equipment such as a bar feeder guide channel system and a tool turret assembly. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. Hfsdpfjzhwabox Apnoi - Main Voltage: 3 x 380 V- Current: 25 A- Frequency: 50 Hz- Control Voltage: 24 V DC / 110 V AC- Enclosure Protection Rating: IP 54 / IP 20- Technical Standard: ČSN 33 2200- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Included Equipment: Bar feeder guide channel system, coolant piping hoses, work area enclosure guarding with viewing window, tool turret assembly Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 2,818 rpm, travel distance X-axis: 45 mm, travel distance Z-axis: 90 mm, overall weight: 2,500 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 2005. This KOVOSVIT MAS OPTIMAT A42 features a machine weight of 2500 kg and a total power consumption of 12 kVA. With 2 units available, if you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A42 machine we have for sale. Contact us for further details. - Main Voltage: 3x 400 V- Frequency: 50 Hz- Current: 25 A- Total Power Consumption: 12 kVA- Control Voltage (AC): 110 V- Control Voltage (DC): 24 V- Lighting: 230 V / 2x 20 W- Control: Curve- Spindle diameter: 42 (50) mm- Spindle speed: 85 – 2,818- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Wiring Diagram Reference: SCH 338 / 40004 - 34- 2 units available Hodpfx Aszhv Tgjpnsfi Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2001, functionality: fully functional, Circumferential diameter: 190 mm Turning length: 180 mm Turning diameter: max. 100 mm Z-axis: 195 mm X-axis: 125 mm Spindle bore: 43 mm Spindle bearing diameter: 80 mm Tailstock diameter: 40 mm Tailstock taper: MK 3 Hfedpfezk D Htsx Apnsi Tailstock travel: 45 mm Number of turret positions: 10 Spindle speed range: 60 - 6000 rpm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Operating hours: 27,267 h

Condition: good (used), Year of construction: 2003, Swing diameter 176 mm Turning length 570 mm Diameter over cross slides 510 mm Working diameter 420 mm Hfedpfx Apezk D E Aonji Travel - z 570 mm Travel - x 245 mm Spindle bore 43 mm Tailstock diameter 85 mm Tailstock quill travel 120 mm Spindle speed 60-6,000 rpm Rapid traverse rate in X and Z direction 24 m/min Control system MSG-805 V Total power consumption 5.5 kW Machine weight approx. 3,400 kg Space requirement approx. 2000x1700x1800 mm Operating hours: 4,256 h

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Swing diameter: 40 mm Turning length: 50 mm Hfjdpfx Apjzk D D Ssnei Control system: Fanuc 0i-TD Spindle speed: 8,000 rpm Travel distance - x: 180 mm Travel distance - z: 200 mm Rapid traverse rate in X and Z direction: 15 m/min Machine weight (approx.): 1500 kg Space requirement (approx.): 1500 x 700 x 1600 mm