Used cNC lathes up to 199mm turning diameter for sale (144)

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX-8i Turning length : 50 mm Hfsdpfx Aasx E Inmeyjr Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:15 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/50 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 20/3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder

Condition: good (used), Year of construction: 2008, operating hours: 52,000 h, machine/vehicle number: 1060142, turning diameter: 50 mm, spindle speed (min.): 6,000 rpm, overall weight: 4,500 kg, Equipment: documentation/manual, Front-facing twin-spindle, twin-turret lathe for machining billets or cold-forged blanks, equipped with: - 2 Hainburgh collet chucks type BZI32 - conveyor belt for feeding parts + inclined unloading table - chip conveyor with auger - robot with 2 grippers Hodpfxoxnmtqj Aaysfr - workpiece turning station for machining on both sides

Condition: used, Year of construction: 2005, control Traub TX8i Hfedpexzk Rmsfx Aayor weight of the machine ca. 4000 kg

Condition: used, Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Index ABC Lathe with IRCO ILS MUK 7012-II Bar Loader, including Knoll coolant system, chip conveyor, and extraction unit Year of manufacture Index ABC: 2017 Year of manufacture Knoll coolant system: 2017 Year of manufacture Knoll chip conveyor: 2017 IRCO ILS MUK-II bar loader: 2015 Control: Fanuc Series 32i-Model B Condition: used Availability: immediately Price: negotiable Technical data: Spindle bore: Ø42 mm Number of turrets: 2 (1 upper, 1 lower) Fixed tool holders: 3 Number of tool positions on lower turret: 6 Number of driven tool positions on lower turret: 0 Number of tool positions on upper turret: 8 Number of driven tool positions on upper turret: 8 Weight: Index ABC including coolant system and extraction approx. 3,500 kg Space requirements: Machine approx. 2.83 m (L) x 1.5 m (W) x 2.2 m (H) Chip conveyor approx. 1.6 m (L) x 1.25 m (W) x 1.78 m (H) Bar loader approx. 1.8 m (L) x 1.0 m (W) x 1.28 m (H) Complete machine with Breuning IRCO ILS MUK 7012-II bar loader, coolant system, chip conveyor, and extraction unit. Power supply Index ABC: 400V/50Hz Hfedpex E Spnofx Aayer Current Index ABC: 63A Rated power Index ABC: 37 kW Connected load Index ABC: 44 kVA Power supply IRCO ILS: 400V/50Hz Rated power IRCO ILS: 1 kW Accessories: Chip conveyor and chip container Complete machine documentation (operating manuals, circuit diagrams) Additional technical data available on request.

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Hjdpfxox Htf He Aayefr Technical specifications: Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm

Condition: good (used), Year of construction: 2008, 8 units Muratec turning centers. MURATEC MW 120, year 2003 Hodpfxoxwb Sms Aayofr MURATEC MW 200, year 2003 MURATEC MW 120, year 2004 MURATEC MW 120, year 2004 MURATEC MW 120, year 2007 MURATEC MW 120, year 2007 MURATEC MW 120, year 2008 MURATEC MW 120, year 2008

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Hjdpfx Aewmzhpjayjfr Various tool holders

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Hodpjxx U Svjfx Aayjfr

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Length: 3100mm Width: 1700mm Hfjdpfxjxtb Nwo Aaysr Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 978/9, turning length: 400 mm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,000 mm, overall weight: 3,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 F, TRAUB TND 160 CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 36 A - Connected load: 18.8 kW The machine is equipped with a tailstock, a three-jaw chuck (diameter: 140 mm), an 8-position tool turret, and a chip conveyor. Hedpfexx Ny Iox Aaysfr This is an item from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 100 mm Turning length : 580 mm In General: Year of manufacture:2007 Control system:Siemens 840 D Turning diameter:100 mm Turning length:approx. 580 mm Bar capacity:32 mm Main spindle: Technology:Motorised spindle Speed:8,000 rpm Torque max.:100 Nm Power max.:26 kW C-axis:0.001° Bar capacity:32 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Motorised spindle Speed:8,000 rpm Max. torque:100 Nm. Max. power:26 kW C-axis:0.001° X-axis:145 mm Z-axis:380 mm Clamping cylinder:Partial hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:220 mm Y-axis:60 (+/- 30) mm Z-axis:320 mm Tool carrier II (X/Z): Hsdjxzmp Espfx Aayjfr Technology:Tool turret :Number of stations. 12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:120 mm Z-axis:345 mm Equipment: Chip management:Chip conveyor Coolant supply:Internal coolant system Bar loader:Irco Breuning Parts removal:Parts gripper + indexing conveyor Tailstock:Stroke 250 mm, quill MK 3 Chuck:2x Hainbuch Spanntop Tool holder:Various driven and static holders

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle drive power: 7.5/5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle drive power: 5.5/3.7 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 8 - Travel X: 140 mm - Travel Z: 235 mm - Travel Y: 70 mm (+/-35 mm) - Driven tool speed: 5,000 rpm - Driven tool power: 1.0 kW LOWER TURRET HEAD - Number of positions: 6 - Travel X/Z: 140 / 310 mm ELECTRICAL SUPPLY - Total connected load: 30 kVA Hfedpfsw Igyrsx Aayjr WEIGHT AND DIMENSIONS - Required floor space: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: 3,100 kg

Condition: repair required (used), Year of construction: 1999, functionality: not functional, Not functional machine, needs to repair or for spare parts. Spindle boring 65 mm Max. working length 120 mm 2 x head Number of tools: 2 x 8 Spindle revolutions 5.000 rpm Hodpex Ew Hfofx Aaysfr Machine dimensions: 7560 x 1645 x 1765 mm Machine weight ca. 5000 kg Siemens Sinumerik 840C, oposite spindle, 2 heads, driving tools Bar feeder 3000 mm, chip conveyor, tool holders

Condition: used, JING YE CK09-R is a CNC Frontal lathe, designed for precision, high accuracy and reliable operation. Working capacities: 2 axes total, 1 spindle, 1 turret with 8 positions and 8 fixed tools. Main specifications: 50 Hz 3x 380 Volt supply, total power 5 kW; overall dimensions L1900×W1600×H1900 mm; machine weight approx. 1550 kg. Accessories: lamp, coolant system, workpiece loader, electronic handwheel, Ethernet and USB interfaces, workpiece conveyor, switch‑cabinet air conditioner, status light. Enables tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hfjdoxx U Iqjpfx Aayjr

Condition: used, Year of construction: 1999, functionality: fully functional, Weiler Primus VC lathe, year 1999, equipped with a 3-axis Siemens digital readout, 3-jaw chuck, Multifix toolpost, rear splash guard, and electric chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by appointment. Hfodpfox Afvgex Aayjr

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm Hodpev Uh Ndjfx Aayjfr - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2014 Hfjdpfx Aaoxy Ub Hsyjr Control : Siemens 840 Dsl Turning diam. : 120 mm Turning length : 380 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl Turning diameter:120 mm Turning length:380 mm Bar capacity:32 Main spindle: Technology:Belt spindle Speed:8,000 rpm Bar capacity:32 mm C-axis:0.001° Sub spindle: Technology:Belt spindle Speed:8,000 rpm Bar capacity:32 mm C-axis:0.001° Tool carrier: Technology:Tool turret Number of stations:16 Tool drive:8 stations Speed:6,000 rpm Tool holder:VDI 16 X-axis:400 mm Z-axis:400 mm Automation: Technologie:Industrieroboter Hersteller:Fanuc Typ:ARC Mate 100iC 6L Equipment: Position measuring systems:Directly in X/Z-axis Measuring probe:Marposs T18 Coolant supply:Minimum quantity lubrication Automation:Fanuc robot system

Condition: excellent (used), Year of construction: 2020, SIEMENS 840D SL control unit MAIN SPINDLE Speed 5.000 1/min Spindle bore 65 mm COUNTER SPINDLE Speed 7,000 1/min Spindle bore 42 mm 2 REVOVER Travel X1, X2 180mm Travel Y1 ±45mm Travel Z1= 704mm, Z2= 620mm 12 stations per revover all driven Hfedpfovi Nizsx Aaysr Chip conveyor Bar loading magazine TOP X-FILES XFS/7.3

Year of construction: 2007, condition: good (used), Manufacturer: Gildemeister• Model: CTX 310• Year: 2007• Control hours: 21,803 h• Spindle hours: 3,299 h• Spindle overhaul: Spring 2025 (approx. 100 h)• Control: Heidenhain Plus iT• Origin: Germany• Availability: immediate• Delivery basis: ex works Technical details• Turning diameter: 210 mm• Turning length: 455 mm• Center height: 190 mm• Swing over bed: 330 mm• Swing over slide: 260 mm• Spindle speed: 6,000 rpm• C-axis: 0.001°• Travels X/Z: 185 / 455 mm• Turret: 12 tools VDI 30• Driven tools: 6• Tailstock travel: 400 mm• Machine weight: 4 t• Space required: 8.0 × 2.2 × 2.0 m Hfjdpfx Aajx Dit Eeyor Accessories• Documentation• Chip conveyor• Tailstock• Coolant system• C-axis• Driven tool stations• Various toolholders• SMW Autoblock 3-jaw chuck

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre For Safety: Hfjdsxu Hlajpfx Aaysr >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 215 mm, travel distance Z-axis: 520 mm, quill diameter: 72 mm, quill stroke: 110 mm, overall weight: 3,070 kg, swing diameter over bed slide: 500 mm, swing diameter over top slide: 220 mm, Equipment: chip conveyor, CNC lathe OPTIturn S600 slant bed with Sinumerik 828 D control system, including the following options: - Safety Integrate - Remnant material detection and processing - Shopturn step programming Hedpsw U Rv Dofx Aaysfr - Network drive management - 3-D simulation - Real-time drawing/track back - 15.6-inch color display, multitouch - Spindle mount DIN ISO 702-1 No. 6; chuck through-hole Ø 65mm; hydraulically operated chuck Ø 215mm; tailstock mount MK4 - Hydraulic tool turret LS200 with 12 tool stations, max. holder height 25mm - 30° slant bed for especially large machining diameters - Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity - Handwheels for manual movement - Heat exchanger on control cabinet - Includes machine feet - Hydraulic unit 1500W, 60 liters - Foot pedal for hydraulic chuck clamping/release - Foot pedal for tailstock with hydraulic quill - Halogen work lamp - Siemens servo motors on all axes - Chip conveyor - Chip trolley - Device for manual tool measurement - Portable electronic handwheel - Renishaw tool probe - Includes machine feet - Electrical connection, 31 KVA three-phase 400V ~ 50 Hz - Control upgrade PPU290 SW8 - Sauter turret VDI30-12T - Automatic tailstock movement - Through-spindle coolant 20 bar - Oil skimmer - Coolant pump 5 bar - Automatic tool measurement - Automatic parts catcher - Axial driven tool holder - Radial driven tool holder

Condition: good (used), Year of construction: 1996, functionality: fully functional, Description: The machine is in good technical condition and can be tested by prior arrangement. Lathe WEILER Praktikant 160 AC, year of manufacture 1996, serial number 4057. Swing over bed: 320 mm Distance between centers: 650 mm Swing over cross slide: 160 mm Spindle bore: 35 mm Hfodpex H Iddsfx Aayjr Speed: 48 – 2,500 rpm Power: 4 kW Dimensions: 500 x 1240 x 1550 mm Weight: 680 kg

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl - Celos Turning diam. : 140 mm Turning length : 235 mm In General: Year of manufacture:2022 Control system:Siemens 840 Dsl -CELOS Turning diameter:140 mm Turning length:253 mm Bar capacity:50 mm Main spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001°Chuck Hfedexy Ubgspfx Aayor Sub spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001° Chuck:Hainbuch clamping top Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:240 mm Y-axis:70 mm (+/- 35 mm) Z-axis:350 mm Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:125 mm Y-axis:70 mm (+/- 35 mm) Z-axis:380 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system incl. temperature control Bar loader:Top Automazioni Parts removal:Parts gripper + cycle belt Tailstock:Below counter spindle Chuck:2x Hainbuch clamping top Tool holders:Various driven and static holders

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed 4,000 rpm - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Hjdpfx Aasuw Izvjyefr Chip conveyor Bar loader TOP Automazioni XF 375

Condition: used, Year of construction: 2011, Technical details: turning diameter: 80 mm turning length: 235 mm max. bar capacity: 42 mm power capacity - driven tools: 1 kW speeds spindle 1: 6000 1/min speeds spindle 2: 5000 1/min numbers of turret head positions: 8 pos drive capacity - spindle motor: SP1 11 / SP2 5,5 kW Tools speed: 60-6000 1/min weight of the machine ca.: ca. 3 t dimensions of the machine ca.: 2,4 x 1,5 x 1,6 m High Performance CNC Turning- and Milling Center - chipconveyor - subspindle - live tools - C-axis Hodpfxotpb T He Aaysfr - brake - partscatcher and partsconveyor - tool eye - barloader LNS HYDROBAR MINI-SPRINT approx. 5000 working hours *