Brewhouse

SSP Lichtenvoorde

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator, Dkodpfx Ahsy Nm I Hsgsp

Condition: good (used), The machine used for washing fruit and olives is in good condition Dkedpfxsvtf T Ds Ahgjp

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 Dodpfjyf Hliox Ahgjkp type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Height range: 38 mm - 197 mm Production capacity: up to 500 c.p.m. No. of heads: 6 Dksdpfx Astqmryjhgop

Condition: new, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use, and thanks to its high-quality construction and powerful driving force, even heavily branched material is no problem! With ease, it processes logs with diameters of up to 16 cm. It is powered by a strong 35 HP Rato gasoline engine and also features a No-Stress automatic system that prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system and can easily pass the TÜV inspection. It offers: Maximum log diameter: 16 cm Feed opening: 16.5 cm x 30 cm 35 HP Rato gasoline engine No-Stress Automatic Feed System Dodpfx Aomfnz Eshgskp Hydraulic feed Weight of 730 kg Price + VAT. Delivery available throughout Europe. -- Trailer-mounted chipper, wood chipper, wood shredder, branch chipper, branch shredder, professional chipper, wood shredding machine.

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar Dedpsykrdbofx Ahgekp - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: excellent (used), functionality: fully functional, total height: 2,175 mm, total length: 13,670 mm, total width: 2,050 mm, The CES CO2 cryogenic tunnel is a high-performance solution for rapid product freezing in industrial environments. Thanks to its use of carbon dioxide, this tunnel provides rapid, efficient cooling, ensuring that food quality and properties are preserved. In fact, it is designed to guarantee uniform freezing while reducing moisture loss. What's more, the CO2 CES cryogenic tunnel stands out for its ability to handle large volumes of product, making it an ideal choice for large-scale operations. What's more, it offers flexibility of use, adapting to a variety of product types while ensuring a continuous workflow. Thanks to its cutting-edge technology, it enhances productivity while reducing energy costs, optimizing freezing processes in the food industry. In short, this machine represents a reliable and efficient solution to the demands of industries requiring rapid freezing, while guaranteeing rigorous compliance with quality and safety standards. Technical specifications Cooling Dimensions: 13670 x 2050 x 2175 mm (L x W x H) Usable dimensions: 11960 x 1201 (L x W) Dkodpfeu Iu U Dox Ahgjp

Condition: used, Year of construction: 2010, functionality: limited functionality, total width: 5,840 mm, total length: 15,700 mm, Offered here is a combination cold and deep-freeze room manufactured by Dresdner Kühlanlagenbau. Included in the scope of supply are the refrigeration units as well as the electrical equipment (lighting, control cabinet, etc.). Please note that the pallet racks shown in the pictures are not included in the sale. Unfortunately, the refrigeration unit for the deep-freeze compartment is defective. Please be aware that we are unable to carry out or arrange any repairs ourselves. Size of cold room (anteroom): 5.60m x 2.75m = 15.4 m² Size of deep-freeze room: 5.60m x 12.59m = 70.5 m² Clear internal height: 3.50m Insulation thickness: 120 mm Dsdpfx Ajtn U Rpohgokp Further dimensions and technical details can be found in the attached PDF document. The unit is not dismantled and can be inspected on site at the production location in Thuringia by appointment. Dismantling and transport are not included in the price and must be organized by the buyer. However, assistance with dismantling and loading by forklift can be provided.

Condition: like new (used), Stainless frame, belt dimensions 1200mm x 150mm, aperture 200mm x 70mm, stop/start, with alarm, 3Ph Djdpfx Ahefhdu Tsgskp

Condition: used, Manufacturer: Dreher Condition: Used Stock Number: 3175 Line is consisting of: Dreher 2 vessel brew system Type: KBA500 Year: 2006 Kettle: 550 litres Heating: 42 kW Controls KBA basic 3x Dreher fermenting tanks Type: GW500 Year: 2006 Content: 520 litres With Dreher ZKV120 cooling Dksdpfx Aheyzyy Hogop 3x Dreher / Brovarni dispensing tanks Type: 500 L CCT Year: 2017 Content: 500 litres 1x Dreher brite tank Content: 1000 litre 6x Dreher Kombi-tank Type: KT500 Year: 2006 Content: 500 litres 5x FIB beertanks Type: 70200503 Year: 2022 Content: 540 litres Auxiliary equipment a.o. - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - bottle washing station - bottle filling machine - corking device - 45x 20 litre kegs - working table - double sink