Hammel 850

WERT Hammel 850 (alle Varianten)

Condition: refurbished (used), Year of construction: 2018, Mobile hammer mill Mobil Flex 1000 with drum magnet and discharge belt Drive: 250 Kw electric 4-hydraulic supports for lifting the machine for transportation Total weight: 33,000 kg Rotor weight: 3,000 kg Production: up to 11 to/h (depending on material size, grid size, parameter settings) Itjdpfjph Uy Tsx Aa Ejr With soundproof housing Dimensions: 11,750 x 2,500 x 4,380 mm Number of hammers: 24 pcs. Hammer weight: 22 kg System is being overhauled

Year of construction: 2018, condition: used, Fully functional Spanish (RECALOR) sawdust dryer Chip quantity at dryer outlet approx. 12,000 kg/h (10% w.b.) Ijdpfxsv Rfuvs Aa Estr Selling because we built a more efficient one

Condition: new, Year of construction: 2023, Sell ​​an alligator shears, metal shears for cables, pipes, profiles Max. cutting force 630 kN Itedolhrb Hopfx Aa Eor Cutting length 600 mm Max opening 280mm hydraulic Pressure 25Mpa full cycles p. minute 7-8×/min. Power consumption 7.5 kW Weight approx. 1,400 kg Size (L×W×H) 1600×700×1300

Condition: ready for operation (used), Year of construction: 1991, | Model | Lokomo C-140B Jaw Crusher | | Feed Opening (Width × Height) | approx. 1400 mm × 1000 mm | | Maximum Feed Size | approx. 600–800 mm | | Strength of Material to be Crushed (e.g. rock) | ~200 MPa (varies significantly depending on material) | Itsdpfxexcg Spe Aa Esr | Capacity (Throughput) | estimated 400 t/h | | Motor Power | 200 kW | | Weight Range | 55 tons |

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine - used- rebuilt - Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive -- High Performance Shredder -- the most powerful shredder in this size for heavy applications RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Machine is equipped with secondary crusher bars Itodjv Dtfvspfx Aa Eer WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) Ijdpfxsua D Als Aa Eotr removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2004, condition: used, Max. operating temperature: 1270°C, roller dimensions: 45x35x2350mm, roller distance: 60mm, min. format: 150x150mm, working width: 1200mm, length: 80.000mm, including documentation. Iedpsh Dbrhofx Aa Eetr

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES Itjdpoghgdvjfx Aa Eer 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Year of construction: 2008, condition: excellent (used), 4x Machines available Length 1150 mm Iedpfx Aaomf Tk Ao Eetr Width 530 mm

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Itodpfx Asiyyf Iea Ejr Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.